AcuRite 06020 Instruction Manual

Display for 3-in-1 Weather Sensor
Package Contents
1. Display
3. Instruction Manual
Instruction Manual
model 06020
This product requires an AcuRite 3-in-1 Weather Sensor
(sold separately) to be operational.
PRODUCT MUST BE REGISTERED
IMPORTANT
PRODUCT REGISTRATION
Register online to receive 1 year warranty protection
TO RECEIVE WARRANTY SERVICE
www.AcuRite.com
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Features & Benets
23 22
1 2
3 4
5 6
7 8
9
10 11
12
13
FRONT OF DISPLAY
1. Current Outdoor Temperature
Arrow icon indicates the direction the temperature is trending.
2. Seasonal Information
Heat Index calculation displays when temperature is 80°F (27°C) or higher. Dew Point calculation displays when temperature is 79°F (26°C) or below Wind chill calculation displays when temperature is 40°F (4°C) or lower.
3. Current Wind Speed
4. Average Wind Speed
Average wind speed over the past 2 minutes.
5. Learning Mode Icon
Disappears after weather forecast self-calibration is complete.
6. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data from your sensor to generate your personal forecast.
7. Storm Indicator
21
20
19
18 17
16 15
14
Indicates when barometric pressure drops.
8. Humidity Level Indicator
Indicates a high or low indoor humidity level.
9. Current Indoor Temperature
Arrow icon indicates the direction the temperature is trending.
10. TODAY Icon
Indicates today’s high/low records
are displayed.
11. Moon Phase
12. ALL-TIME Icon
Indicates all-time records are displayed.
13. Button
For momentary backlight and dimmer settings.
14. AUTO DIM Indicator
Indicates display is in auto-dimming brightness mode (page 5).
15. Display Low Battery Indicator
16. Date
17. Intelli-Time® Clock
Automatically updates itself for Daylight Saving Time.
18. Current Indoor Humidity
Arrow icon indicates the direction the humidity is trending.
19. Barometric Pressure
Arrow icon indicates the direction the pressure is trending.
20. Peak Wind Speed
Highest speed from past 60 minutes.
21. Current Outdoor Humidity
Arrow icon indicates the direction the humidity is trending.
22. Outdoor Sensor Signal Strength
23. Sensor Low Battery Indicator
2
Features & Benets
1
2
3
4
10
9
5
6
BACK OF DISPLAY
1. Button
For setup preferences.
ox
2. Button
For setup preferences.
3. Button
For setup preferences.
4. Button
Press to access all-time high and low records.
5. Intelli-Time® Battery Compartment
8
7
6. Plug-in for Power Adapter
7. Power Adapter
8. Backup Battery Compartment
9. Reset Button
Full reset to factory defaults.
10. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
11. Battery Compartment Cover
(not shown)
3
Display Setup
Set the A-B-C Switch
1
Locate the A-B-C switch inside
the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display and the sensor in order for the units to synchronize.
Install or Replace Backup
2
Batteries (optional)
1. Remove the battery compartment cover.
2. Insert 3 x AAA alkaline batteries into the battery compartment, as shown.
Follow the polarity (+/–)
diagram in the battery compartment.
3. Replace the battery cover.
Plug in Power Adapter
3
For the best performance, plug
in the power adapter as the main power source for this product.
A-B-C Switch
1
Set to match sensor
A B C
Install Backup
2
Batteries
(optional) 3 AAA batteries
Plug in Power
3
Adapter
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire, as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge non-rechargeable batteries. DO NOT short-circuit the supply terminals.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not be
IMPORTANT: Batteries are a backup power source to preserve records in the event of a power outage.
Power adapter is recommended as the primary power source to enjoy the full functionality of this product.
4
Loading...
+ 8 hidden pages