AcuRite 06019RM Instruction Manual
Instruction Manual
Display for 3-in-1 Weather Sensor
model 06019RM
Package Contents
1. Display unit with tabletop stand
2. Power adapter
3. Instruction Manual
This product requires an AcuRite 3-in-1 Weather Sensor (model 06008RM; sold
separately) to be operational.
IMPORTANT
PRODUCT REGISTRATION
Register online
to receive 1 year
warranty protection
www.AcuRite.com
PRODUCT MUST BE REGISTERED
TO RECEIVE WARRANTY SERVICE
Archived Products
Register a Product
►
Questions? Contact Customer Support at
(877) 221-1252 or visit www.AcuRite.com.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Features & Benets
Display Unit
1 2 3 4 5 6 7
8
28
29
27
26
25
24
23
22
9
10
11
12
13
14
15
1718 16192021
32
30
31
33
2
DISPLAY UNIT
1. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
2. Sensor Low Battery Indicator
3. Average Wind Speed
Average of all speeds over last
30 minutes or calibrated 30 minute
interval.
4. Backlight Button
5. Current Wind Speed
6. Wind Gust Icon
7. Peak Wind Speed
Highest speed from last 30 minutes or
calibrated 30 minute interval.
8. Current Indoor Temperature
Arrow icon indicates direction
temperature is trending.
9. Display Low Battery Indicator
10. Current Indoor Humidity
Arrow icon indicates direction
humidity is trending.
11. AUTO DIM Indicator
12. Clock
13. Date
14. 12 to 24 Hour Weather Forecast
Self-Calibrating Forecasting pulls data
from the outdoor sensor to generate
your personal forecast.
15. Multi-Variable History Chart
Displays the past 12 hours of data for
pressure, temperature and humidity.
16. REPLAY Button
For displaying historical data.
17. + Button
For setup preferences.
18. Learning Mode Icon
Disappears after weather forecast
self-calibration is complete.
19. SET Button
For setup preferences.
20. – Button
For setup preferences.
21. SELECT Button
Press to change the Weather Select
(#23) category being displayed.
22. Barometric Pressure
Arrow icon indicates direction
pressure is trending.
23. Weather Select
Displays heat index, dew point or wind
chill, daily, monthly, all time high & low
records indoor/outdoor temperatures
and humidity and high for wind speed.
24. REPLAY and LIVE Icons
REPLAY indicates historical data is
being displayed. LIVE icon is shown
while exiting REPLAY function.
25. Current Outdoor Temperature
Arrow icon indicates direction
temperature is trending.
26. Low Wind Speed
Lowest speed from past 30 minutes or
calibrated 30 minute interval.
27. Outdoor Sensor Signal Strength
BACK OF DISPLAY UNIT
28. Integrated Hang Hole
For easy wall mounting
29. Battery Compartment
30. A-B-C Switch
ID code that must match sensor’s A-B-C
switch to ensure units synchronize.
31. CLEAR RECORD/RESET Button
Press to clear record currently being
viewed. Press and HOLD for full reset
to factory defaults.
32. Battery Compartment Cover
33. Power adapter
3
Display Unit Setup
Set the A-B-C Switch
1
Locate the A-B-C switch inside the
•
battery compartment. Set the A-B-C
switch to A, B or C. You must select
the same letter choices for both the
display unit and the sensor in order
for the units to synchronize.
Install or Replace Batteries
2
1. Remove the battery
•
compartment cover.
2. Insert 6 x AA alkaline batteries
into the battery compartment,
as shown. Follow the polarity
(+/-) diagram in the battery
compartment.
3. Replace the battery cover.
Plug Power Adapter into
3
Electric Outlet
•
Plug in
3
used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.
Power
Adapter
A-B-C Switch
1
set to match sensor
Install Batteries
2
6 AA Batteries
IMPORTANT: Batteries are a backup power source
to preserve records in the event of a power outage.
Power adapter is recommended as the primary power
source to enjoy the full functionality of this product.
PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.
BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be
4
A B C
Loading...