AcuRite 02098 Instruction Manual

Instruction Manual

Weather Station

model 02098

YB~~

II II II II 1, 1, I

;,Hg29.98,

CONTENTS

Unpacking Instructions ........... 2

Package Contents .................. 2

Product Registration ............... 2

Features & Benets: Sensor...... 2

Features & Benets: Display ..... 3

Setup .................................... 5

Sensor Setup ......................... 5

Display Setup ........................ 6

Set the Time, Date & Units ...... 7

Backlight Settings ................... 7

Placement Guidelines ............. 8

Using the Weather Station...... 9

Programmable Alarms...........10

Troubleshooting ....................11

Care & Maintenance............. 12

Calibration ...........................12

Specications........................13

FCC Information ...................13

Customer Support .................14

Warranty..............................14

Questions? Contact Customer Support at

877-221-1252 or visit www.AcuRite.com.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

Congratulations on your new AcuRite product. To ensure the best
possible product performance, please read this manual in its entirety

and retain it for future reference.

Unpacking Instructions

Remove the protective lm that is applied to the LCD screen prior to using this
product. Locate the tab and peel off to remove.

Package Contents

1. Display with Tabletop Stand

2. Outdoor Sensor

3. Instruction Manual

4. Power Adapter

PRODUCT MUST BE REGISTERED

IMPORTANT

TO RECEIVE WARRANTY SERVICE

PRODUCT REGISTRATION

Register online to receive 1 year of warranty protection

www.AcuRite.com

Features & Benets

1

2

5

3

4

OUTDOOR SENSOR

1. Integrated Hanger

For easy placement.

2. Wireless Signal Indicator

Flashes when data is being sent
to the display.

3. Battery Compartment

4. A-B-C Switch

ID code that must match display’s
A-B-C switch to ensure units synchronize.

5. Battery Compartment Cover

2

Features & Benets

19 18 17 16

1

2
3

4

5

6 7 8 9 10 7 11

FRONT OF DISPLAY

1. Current Outdoor Temperature

Arrow icon indicates the direction
temperature is trending.

2. Outdoor Sensor Signal Strength

3. Sensor Low Battery Indicator

4. Current Outdoor Humidity

Arrow icon indicates the direction
humidity is trending.

5. Moon Phase

6. Button

For viewing high and low records.

7. and Buttons

/\. V

For setup preferences.

8. Clock
9 . Button

For setup preferences.

10. Display Low Battery Indicator

11.

12. Date

Button

For alarm setup.

inHg29.98--.

Icon

13.

Indicates display is in auto-dimming
brightness mode (see page 7).

14. Current Indoor Humidity

Arrow icon indicates direction humidity is
trending.

15. Current Indoor Temperature

Arrow icon indicates direction temperature is
trending.

16. Current Barometric Pressure

Arrow icon indicates the direction pressure is
trending.

17. 12 to 24 Hour Weather Forecast

Self-calibrating forecasting pulls data from
the outdoor sensor to generate your personal
forecast.

18. Icon

Disappears after weather forecast
self-calibration is complete.

19. Alarm ON Indicator

Indicates alarm is activated to emit an
audible alert when conditions exceed your
presets (see page 10).

15

14

13

12

3

Features & Benets

1

2

3

4 8

5

6

BACK OF DISPLAY

1. Backlight Button

For momentary backlight and

dimmer settings.

2. Integrated Hang Holes

For easy wall mounting.

3. Backup Battery Compartment

4. A-B-C Switch

ID code that must match sensor’s A-B-C
switch to ensure units synchronize.

7

5. Plug-in for Power Adapter

6. Power Adapter

7. Battery Compartment Cover

8. RESET Button

For full reset to factory defaults.

4

SETUP

Sensor Setup

Set the A-B-C Switch

1

The A-B-C switch is located inside

•

the battery compartment. It can
be set to A, B or C. However,
you must select the same letter

choices for both the sensor and

the display in order for the units
to synchronize.

Install or Replace Batteries

2

AcuRite recommends high quality

•

alkaline or lithium batteries for

the best product performance.

Heavy-duty or rechargeable

batteries are not recommended.

The sensor requires lithium
batteries in low-temperature

conditions. Cold temperatures
can cause alkaline batteries
to function improperly. Use
lithium batteries in the sensor for
temperatures below -4ºF / -20ºC .

1. Slide off the battery

compartment cover. Take

note of the A-B-C switch
setting inside the battery

compartment.

2. Insert 2 x AA batteries into
the battery compartment, as
shown. Follow the polarity
(+/-) diagram in the battery

compartment.

3. Replace the battery cover.

1

•

A-B-C Switch

Set to match

display

A B C

Install Batteries

2

2 AA batteries

•

B~~f~~~S

ALKALINE

BATTERIES

It (•Q ¥•¥&•

5

(70°C) 1S8°F I
(70°C) 1S8°F I

Display Setup

1

Set the A-B-C Switch

Locate the A-B-C switch inside

•

the battery compartment. Set
the A-B-C switch to A, B or C.
You must select the same letter
choices for both the display and

the sensor in order for the units to

synchronize.

2

Install or Replace Backup
Batteries (optional)

•

1. Remove the battery

compartment cover.

2. Insert 3 x AAA alkaline

batteries into the battery
compartment, as shown. Follow
the polarity (+/–) diagram in
the battery compartment.

3. Replace the battery cover.

3

Plug in Power Adapter

For the best performance, plug

•

in the power adapter as the main
power source for this product.

A-B-C Switch

1

Set to match
sensor

IMPORTANT: Batteries are

a backup power source to
preserve records in the event of
a power outage. Power adapter

is recommended as the primary
power source to enjoy the full
functionality of this product.

PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE
WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.

used for an extended period of time. Follow the polarity (+/-) diagram in the battery compartment. Promptly remove dead batteries from the device. Dispose of used
batteries properly. Only batteries of the same or equivalent type as recommended are to be used. DO NOT incinerate used batteries. DO NOT dispose of batteries in fire,
as batteries may explode or leak. DO NOT mix old and new batteries or types of batteries (alkaline/standard). DO NOT use rechargeable batteries. DO NOT recharge
non-rechargeable batteries. DO NOT short-circuit the supply terminals.

BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment that will not be

A B C

Install Backup

2

Batteries

3 AAA Batteries
(optional)

Plug in

3

Power Adapter

6

Set the Time, Date & Units

Press and release the “ ” button, located on the front of the display unit, to
enter SET MODE. Once in set mode, the preference you are currently setting
will blink on the display.

To adjust the currently selected (ashing) item, press and release the “ ” or
“ ” buttons (press and HOLD to fast adjust).

V

To save your adjustments, press and release the “ ” button again to adjust
the next preference. The preference set order is as follows:

LANGUAGE (ENGLISH, FRENCH)
AUTO DST (Daylight Saving Time ON or OFF)*
CLOCK HOUR
CLOCK MINUTE
CALENDAR MONTH
CALENDAR DATE
CALENDAR YEAR
TEMPERATURE UNITS (ºF or ºC)
BAROMETRIC PRESSURE UNITS (hPa or inHg)

*If you live in an area that observes Daylight Saving Time, DST should be set

to ON, even if it is not currently Daylight Saving Time.

You will automatically exit SETUP MODE if no buttons are pressed for 10
seconds. Enter setup mode at any time by pressing the “ ” button.

0

/\.

0

0

Display Backlight Settings

This weather station’s color display features three different lighting settings:
High (100%) brightness, Medium (60%) brightness and Low (15%) brightness.

When display is powered with the power adapter, backlight remains on at
100% brightness. Press Backlight button once to dim to 60% brightness; press
again to dim to 15%, press a third time to enter AUTO-DIM mode.

NOTE: Pressing and holding the “ ” button for 5 seconds will disable the

backlight. Once any button is pressed, the backlight will return to your selected

setting.

y

AUTO-DIM MODE: Automatically adjusts display brightness based on time of day and year.

MARCH 11- NOVEMBER 4

NOVEMBER 5 - MARCH 10

6:00 a.m. - 9:00 p.m. = 100% brightness
9:01 p.m. - 5:59 a.m.= 15% brightness
7:30 a.m. - 7:00 p.m.= 100% brightness
7:01 p.m. - 7:29 a.m. = 15% brightness

7

Placement for Maximum Accuracy

AcuRite sensors are sensitive to surrounding environmental conditions. Proper
placement of both the display and the outdoor sensor are critical to the
accuracy and performance of this product.

Display Placement

Place the display in a dry area free of dirt and dust. Display
stands upright for tabletop use or is wall-mountable.

Outdoor Sensor Placement

Sensor must be placed outside to observe outdoor conditions.
Sensor is water-resistant and is designed for general outdoor
use, however, to extend its life place the sensor in an area

l

1111

protected from direct weather elements.

Hang the sensor using the integrated hang holes or hanger, or
by using string (not included) to hang it from a suitable location,
like a well covered tree branch. The best location is 4 to 8 feet
(1 to 2 meters) above the ground with permanent shade and
plenty of fresh air to circulate around the sensor.

Important Placement Guidelines

• To ensure accurate temperature measurement, place units out of direct

sunlight and away from any heat sources or vents.

• Display and outdoor sensor must be within 330 ft (100 m) of each other.

• To maximize wireless range, place units away from large metallic items, thick
walls, metal surfaces, or other objects that may limit wireless communication.

• To prevent wireless interference, place both units at least 3 ft (90 cm) away
from electronic devices (TV, computer, microwave, radio, etc.).

\ I I

--o--

- -

/ I \'

AT

LEAST

TV

feet

3

(.9m)

APART

(330 feet maximum)

(100 meters)

Setup is Complete

The sensor will now synchronize with the display. It may take a few minutes for
synchronization to complete. Please refer to the troubleshooting section of this
manual if anything appears to be functioning improperly.

8

OPERATION

Using the Weather Station
Learning Mode

Self-calibrating forecasting uses a unique algorithm to analyze changes in
pressure over a time period (called Learning Mode) to determine your altitude.
After 14 days, the icon disappears from the display screen. At this point,
the self-calibrated pressure is tuned in to your location and the unit is ready for

superior weather prediction.

Weather Forecast

AcuRite’s patented self-calibrating forecasting provides your personal forecast
of weather conditions for the next 12 to 24 hours by collecting data from the
sensor in your backyard. It generates a forecast with pinpoint accuracy ­personalized for your exact location.

STORMY

& WINDY

(flashing=stormy)

View the complete list of icons at www.AcuRite.com/acurite-icons

SNOW

LIKELY

~

......

.: X Jt :w; i,; X K

SNOW / RAIN

MIX LIKELY

RAIN

LIKELY

6

1, 1, 1, 1, I

CLOUDY

~

Barometric Pressure

Subtle variations in barometric pressure greatly affect the weather. This
weather station displays the current pressure with an arrow icon to indicate
the direction the pressure is trending (FALLING, STEADY, or RISING).

Moon Phase

Track the phases of the moon, conveyed through simple lunar phase icons:

NEW WAXING 1ST FULL

CRESCENT QUARTER

3RD

QUARTER

WANING

CRESCENT

High & Low Records

Today’s high and low records are displayed for indoor and outdoor
temperature and humidity. Today’s records automatically clear at 12:00am
midnight every day.

Press the “ “ button to cycle through high and low recorded values for
outdoor and indoor temperature and humidity. While viewing all-time records,
a date and timestamp are shown for when each value was recorded. You will
automatically exit records if no buttons are pressed for 8 seconds.

To manually clear a HIGH or LOW record, press and HOLD both the “ “ and
“ “ buttons simultaneously for 3 seconds while viewing the record(s) you wish

V

to clear. Dashes display to conrm you have cleared the record(s).

9

/\.

Programmable Alarms

This display features programmable alarms that sound an alert to notify you
when a value (for time, temperature or humidity) has been reached or
exceeded. When an alarm is triggered, the display emits an audible beep and
ashes data in the affected category. You can customize the alarms by turning
ON or OFF the alarms you’d like activated or deactivated, and by inputting your
own values to trigger the alarm.

Setup an Alarm

1. Press and release the “ ” button until the reading for which you wish to

set an alarm is shown on the display. “ ” will be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “ ” button. The current HIGH alarm value will be shown.

4. Press and release the “ “ or “ “ buttons to adjust the alarm’s HIGH value.

5. Press and release the “ ” button. The current LOW alarm value will be shown.

6. Press and release the “ “ or “ “ buttons to adjust the alarm’s LOW value.

7. Press and release the “ ” button to end alarm adjustments, OR press

and release the “ ” button to cycle to the next reading.

Disable an Alarm

1. Press and release the “ ” button until the reading for which you wish to

disable an alarm is shown on the display. “ ” will be shown.

2. Press and release the “ “ or “ “ buttons until “ ” appears.

3. Press and release the “ ” button to cycle to the next reading.

4. Repeat steps 1-3, as needed.

NOTE: To disable ALL alarms at once, press and HOLD the “ ” button for
10 seconds.

You will automatically exit alarm SET MODE if no buttons are pressed for
10 seconds. Enter alarm SET MODE at any time by pressing the “ ” button.

•m

V

0

/\.

0

V

0

•m

•m

/\.

•m

V

/\.

V

/\.

~

•m

•m

~

•m

•m

10

Troubleshooting

Problem Possible Solution

No outdoor sensor

reception

no bars

Tull

Outdoor

temperature

is ashing or

showing dashes

Inaccurate forecast

Inaccurate

temperature

or humidity

Display screen

not working

If the wireless signal indicator shows no bars:

• Relocate the display and/or the outdoor sensor.

The units must be within 330 ft (100 m) of each other.

• Make sure both units are placed at least 3 feet (.9 m)
away from electronics that may interfere with the wireless
communication (such as TVs, microwaves, computers, etc.).

• Use standard alkaline batteries (or lithium batteries in
sensor when temperature is below -4ºF/-20ºC). Do not
use heavy-duty or rechargeable batteries. NOTE: It may
take a few minutes for display and sensor to synchronize
after batteries are replaced.

Flashing of the outdoor temperature is generally an
indication of wireless interference.

1. Bring both the sensor and display indoors and remove

batteries from each.

2. Make sure the A-B-C switches on both units match.

3. Reinstall batteries in the outdoor sensor.

4. Reinstall batteries in the display.

5. Let the units sit within a couple feet of each other

for a few minutes to gain a strong connection.

• Weather Forecast icon predicts conditions for the next
12 to 24 hours, not current conditions.

• Has the icon disappeared from the display? Learning

Mode must complete before forecast and pressure will

be accurate.

• Allow unit to run continuously for 33 days. Battery

removal or resetting the display will restart Learning
Mode. After 14 days, forecast should be fairly accurate,
however, Learning Mode calibrates for a total of 33 days.

• Make sure both the display and sensor are placed out of

direct sunlight and away from any heat sources or vents
(see page 8).

• Make sure both units are positioned away from moisture
sources (see page 8).

• Check that the power adapter is plugged into the display
and an electrical outlet.

• Reset the display by pressing the reset button, located
on the back of the display. Date and time will need to be

entered after a reset.

0-)

If your AcuRite product does not operate properly after trying
the troubleshooting steps, visit www.AcuRite.com or call
877-221-1252 for assistance.

11

Care and Maintenance

Display Care

Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep
away from dust, dirt and moisture. Clean ventilation ports regularly with a
gentle puff of air.

Outdoor Sensor Care

Clean with a soft damp cloth. Do not use caustic cleaners or abrasives.

Calibration

The indoor/outdoor temperature and humidity readings, and barometric
pressure can be calibrated on the display unit to improve accuracy. Calibration
can improve accuracy when sensor placement or environmental factors impact
the data accuracy.

/\. (I V

1. To access calibration mode, press AND HOLD the “ ,“ “ ,” and “ “
buttons simultaneously for at least 5 seconds.

2. To adjust the currently selected (ashing) item, press and release the “ “

3. To save your adjustments, press and release the “ ” button to adjust the

After 20 seconds of inactivity, the display will save the adjustments and exit
calibration mode. Note: Calibrations will be erased if the display is reset or if
batteries are removed and the power adapter is unplugged.

V /\.

or “ “ buttons to calibrate the data value higher or lower than the actual
reading.

next preference. The “ ” icon will remain illuminated next to calibrated
values.

The preference set order is as follows:
OUTDOOR TEMPERATURE

OUTDOOR HUMIDITY
INDOOR TEMPERATURE
INDOOR HUMIDITY
BAROMETRIC PRESSURE (must be set to MANUAL mode to calibrate)*

*To change from AUTO to MANUAL pressure mode and vice versa, press
AND HOLD the “ ” button for 10 seconds. “MANUAL” will appear next to
the barometric pressure to indicate that manual mode has been activated.
Press and HOLD the “ ” button for 10 seconds to return to AUTO mode.

0

0

12

Specications

TEMPERATURE RANGE

Outdoor: -40ºF to 158ºF; -40ºC to 70ºC
Indoor: 32ºF to 122ºF; 0ºC to 50ºC

HUMIDITY RANGE

Outdoor: 1% to 99% RH
Indoor: 1% to 99% RH

WIRELESS RANGE

OPERATING FREQUENCY

POWER

330 ft/100 m depending on home construction materials
433 MHz
Display: 5V, 100mA power adapter

3 x AAA alkaline batteries (optional)
Sensor: 2 x AA alkaline or lithium batteries

DATA REPORTING

Outdoor: 16 second updates
Indoor: 60 second updates

FCC Information

This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:
1- This device may NOT cause harmful interference, and
2- This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modications to this unit not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and the receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modications to this equipment.
Such modications could void the user authority to operate the equipment.
This device complies with Industry Canada licence-exempt RSS standard(s).
Operation is subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation of the device.

13

Limited 1-Year Warranty

PURPOSE.

14

We expressly disclaim all liability for special, consequential,

Canada, please consult the policies applicable to the country in

State of Wisconsin.
Wisconsin; and purchaser consents to jurisdiction within the
federal or State courts having jurisdiction in Walworth County,
dispute relating to this Policy shall be brought exclusively in the
laws of the United States and the State of Wisconsin. Any
This Return, Refund, and Warranty Policy is governed by the

Governing Law

resale sites such as eBay or Craigslist.
refund, or warranty services if you buy products used or from
of our products. We cannot and do not offer any return,
Additionally, this Policy applies only to the original purchaser

which you made your purchase.

purchases made in a country other than the United States or
purchases made in the United States and Canada. For
This Return, Refund, and Warranty Policy applies only to

Applicability of Policy

original purchase price paid for the product.
products, your purchase or your use thereof, exceed the
In no case shall our liability for any claim relating to our

writing and signed by a duly authorized agent of ours.
to modify or waive the terms of this warranty unless done in

Furthermore, no person, rm or corporation is authorized

or liability in connection with the sale of our products.
or corporation is authorized to bind us to any other obligation

consequences arising from their use or misuse. No person, rm

any of our products, the purchaser assumes all liability for the
our products to the extent permitted by law. By acceptance of
We further disclaim liability from personal injury relating to

so the above limitation or exclusion may not apply to you.
exclusion or limitation of incidental or consequential damages,
from any breach of this warranty. Some states do not allow the
or incidental damages, whether arising in tort or by contract

AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR
LIMITATION THE IMPLIED WARRANTY OF MERCHANTABILITY
ARE HEREBY EXPRESSLY DISCLAIMED, INCLUDING WITHOUT
OTHER THAN THE EXPRESS WARRANTY SET FORTH HEREIN
WARRANTIES, EXPRESS OR IMPLIED. ALL OTHER WARRANTIES
FOR THE PRODUCTS AND IS EXPRESSLY IN LIEU OF ALL OTHER
THE ABOVE-DESCRIBED WARRANTY IS THE SOLE WARRANTY

the amount of the original purchase price.
or replacement is not feasible, we may, at our option, refund
replacement of the defective item(s). If we determine that repair
Remedy for breach of this warranty is limited to repair or

than our authorized representatives.
abused, improperly installed, or repaired or altered by others
been damaged (including by acts of nature), tampered,
wear and tear not affecting the functionality of the product,
will give no credit for products which have received normal
costs and charges. This warranty will not be breached, and we
We hereby disclaim all responsibility for such transportation
charges for returned goods shall be paid for by the purchaser.
option, be repaired or replaced by us. Transportation costs and
from date of sale will, upon examination by us, and at our sole
to breach the warranty contained herein within ONE YEAR
Any product which, under normal use and service, is proven

period of one year from the date of purchase.
properly installed and operated, will be free of defects for a
warranty are of good material and workmanship and, when
We warrant that all products we manufacture under this

provides the benets and services set forth herein.

forth herein. For purchases of Chaney products, Chaney

products, AcuRite provides the benets and services set

Instrument Company. For purchases of AcuRite
AcuRite is a wholly owned subsidiary of Chaney

www.AcuRit e.com

PRODUCT REGIS TRATION

TO RECEIVE WARRANT Y SERVICE
PRODUCT MUS T BE REGIS TERED

Regist er online t o receive 1 year war ranty pro t ection

IMPORTANT

[phone]

► Replacement Parts ► Submit Feedback & Ideas
► Instruction Manuals ► Support User Forum
► Installation Videos ► Register your Product

Visit us at www.AcuRite.com

Q)

product available and contact us in any of the following ways:
class service. For assistance, please have the model number of this

AcuRite customer support is committed to providing you with best-in-

Customer Support

15

ACU

►

RITE®

Weather Temperature Weather Kitchen

Stations and Humidity Alert Radio Thermometers

It’s more than accurate, it’s

AcuRite offers an extensive assortment of precision instruments,

designed to provide you with information you can depend on to

Plan your day with condence

and Timers

ACU

►

.

™

Clocks

RITE.

www.AcuRite.com

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the

Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-

Printed in China

02098 INST 110716 Visit www.AcuRite.com/patents for details.

rights are the property of their respective owners. AcuRite uses patented technology.