Activeforever Standers Mobility Bed Rail User Manual

WARNING: Please read before using this product.

1. Serious injury or death can result if bed rails are not properly installed. Entrapment has resulted in injuries and
death. Entrapment is a situation where an individual can become wedged between a bed rail and any other

object. The possibility of an individual’s head, body, arms, or legs could be trapped between the bars of a bed

rail, between the bed rail and a head or footboard of a bed, or between the bed rail and a mattress. While
there are no specific guidelines for bed rails, Standers Inc. is committed to providing safe products and
informing the user of ways to prevent accidents.

SAFETY PRECAUTIONS:

 Regularly check the bed rail to identify areas of possible entrapment.
 Position the bed rail at least 18" away from head or footboards of a bed.
 Make sure that there is no gap between the bed rail and the side of the mattress. A gap could allow the

user to become wedged between the bed rail and the mattress.

 Do not use this product with light weight foam or air mattresses. Light weight foam or air mattresses

will allow the bed rail to move and may allow users to become trapped between the bed rail and bed.

 Additional safety measures should be taken for users that are a high risk. Such users include those

who are not mentally conscious (including those individuals under medication), users who have size or
weight conditions that may change the gap between the bed rail and the mattress, and users who are
generally restless while awake or asleep.

 If you have any concerns or questions regarding these precautions, please contact Standers at 1-800-

506-9901.

2. If you are suffering from an ailment or injury or are taking medications that affect your balance or ability to
stand or sit down, you should first consult with a physician before using this product. If the product is not used
properly, serious injury or harm could result.

3. The product was not intended to carry the full weight of an individual. This product is only intended to provide
balance and support while sitting and standing.

4. The product instructions must be carefully followed to ensure that the product is properly assembled and
positioned. Failure to follow the instructions could result in serious injury to the user(s) of the product.

5. Children should not be allowed to hang on or play with the product.

6. It is important that the weight of the mattress is adequate to support the product. The bed rail is not well suited
for and should not be used with light-weight foam or other light-weight mattresses.

7. DISCLAIMER: Neither Standers, Inc. nor the manufacture is liable for any harm or injury that may result or has
resulted from the improper use or assembly of the product.

Limited Warranty

Congratulations on your purchase of your Standers brand product. We hope that it will ease your daily

living. Please read the following warranty statement for your protection.

Standers, Inc. warrants to the original purchaser that this product will be free from defects in material
and/or workmanship for 1 year from the date of purchase. During the warranty period, Standers, Inc. will
correct any defects in material or workmanship, at no charge. The original purchaser, however, must prepay
shipping cost. Any replacement parts will be new and are warranted for the remainder of the original warranty
or thirty (30) days from the date of shipment, whichever is longer. The original purchaser must notify Standers,
Inc. during the warranty period in writing of the defect in workmanship or material. This warranty is not
transferable and covers only normal use. NO SHIPPING CHARGES ARE REFUNDABLE.

The warranty does NOT cover the following:

Damage during shipment other than original shipment to retailer.
Damage caused by unauthorized attachments, alterations, or modifications.
Damage caused by the use of the product for purposes other than those for which the product was

designed or intended.

Damage caused by any other abuse, misuse, mishandling or misapplication.

Under no circumstances shall Standers, Inc. be liable for any special, incidental, or consequential damages

based upon breach of this limited warranty, breach of contract, or strict liability.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF.

ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE), ARE HEREBY DISCLAIMED.

Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may
not apply to you. This warranty gives you specific legal right, and you may also have other rights, which vary
from state to state.

To obtain service under this warranty, you can reach Standers Inc. at 74 Canterbury Circle, Logan,
Utah 84321.

Assembly Instructions

1. Remove all parts from the box and become
familiar with the parts as shown in Figure 1.

FIGURE 1

2. Determine which side of the bed the
product will be installed as shown in Figure 2.

4. Connect Base Tubes together as shown in
Figure 4.

FIGURE 4

5. Attach Base Tubes into the Base Support
Tubes as shown in Figure 5. Make sure the
Spring Pins engage the hole in the Base
Support Tubes.

FIGURE 2

3. IMPORTANT: Position the product in the
correct orientation based on which side of the
bed you will be using this product as shown in
Figure 3.

FIGURE 5

6. As shown in Figure 6, fully insert the
assembled product between the mattress and
box spring of the bed. Note that product
should be at least 18" away from the head of
the bed and the Handle should be 4" to 6"
above the top of the mattress.

FIGURE 3

FIGURE 6