Activeforever Shoulders Back Posture Support Lite User Manual

1. Place ShouldersBack™on a flat surface label-side down.

2. Fasten suspender strap A to B at the very ends of each strap. Repeat with straps C and D.

3. Put your ShouldersBack™on like a vest, label facing out.

4. Fasten chest straps E and F at a comfortable tension around your rib cage.

5. Tighten the suspender straps until they pull your shoulders back, increasing or decreasing tension to the desired corrective force.

6. Correct use of the suspender straps is key. The angle across your shoulders usually works best at 45°, but with use effective positioning will be determined.

7. Hand wash. Line dry.

Patent Pending | Notice to Customer and Limited Warranty

Customer acknowledges that Customer has read the accompanying instructions for proper use of the ShouldersBack product. EquiFit, inc. hereby disclaims any and all liability for damages incurred as a result of the use of the product not strictly in accordance with the instructions, and Customer waives all claims which may arise out of such as improper usage. In any event, liability of EquiFit, inc. arising from Customer’s usage of the product shall not exceed the cost of the product. EQUIFIT, INC. MAKES NO WARRANTY, EXPRESS AND/OR IMPLIED, WITH RESPECT TO THE PRODUCT OTHER THAN IT WILL REPLACE THE PRODUCT FOR NO CHARGE SHOULD THE PRODUCT PROVE DEFECTIVE WITHIN THIRTY (30) DAYS OF PURCHASE. CLAIMS MUST BE ACCOMPANIED BY PROOF OF PURCHASE AND THE RETURN OF THE PURPORTED DEFECTIVE PRODUCT. THIS SHALL BE THE SOLE RESPONSIBILITY OF EQUIFIT, INC. HEREUNDER.

In no event shall EquiFit, inc. be liable for any incidental and/or consequential damages.

ShouldersBack™Fitting Instructions

1. Place ShouldersBack™on a flat surface label-side down.

2. Fasten suspender strap A to B at the very ends of each strap. Repeat with straps C and D.

3. Put your ShouldersBack™on like a vest, label facing out.

4. Fasten chest straps E and F at a comfortable tension around your rib cage.

5. Tighten the suspender straps until they pull your shoulders back, increasing or decreasing tension to the desired corrective force.

6. Correct use of the suspender straps is key. The angle across your shoulders usually works best at 45°, but with use, effective positioning will be determined.

7. Hand wash. Line dry.

Patent Pending | Notice to Customer and Limited Warranty

Customer acknowledges that Customer has read the accompanying instructions for proper use of the ShouldersBack product. EquiFit, inc. hereby disclaims any and all liability for damages incurred as a result of the use of the product not strictly in accordance with the instructions, and Customer waives all claims which may arise out of such as improper usage. In any event, liability of EquiFit, inc. arising from Customer’s usage of the product shall not exceed the cost of the product. EQUIFIT, INC. MAKES NO WARRANTY, EXPRESS AND/OR IMPLIED, WITH RESPECT TO THE PRODUCT OTHER THAN IT WILL REPLACE THE PRODUCT FOR NO CHARGE SHOULD THE PRODUCT PROVE DEFECTIVE WITHIN THIRTY (30) DAYS OF PURCHASE. CLAIMS MUST BE ACCOMPANIED BY PROOF OF PURCHASE AND THE RETURN OF THE PURPORTED DEFECTIVE PRODUCT. THIS SHALL BE THE SOLE RESPONSIBILITY OF EQUIFIT, INC. HEREUNDER.

In no event shall EquiFit, inc. be liable for any incidental and/or consequential damages.

ShouldersBack™Fitting Instructions

#5533_2007 #5533_2007

A

B

C, D

E, F

A

B

C, D

E, F