Actiontec M1000 User Manual

Creative Solutions for the Digital Life
Modular
DSL Router
ctiontec’s Modular DSL Router is the industry’s first
modular DSL residential modem/router, designed to
A
equip broadband service providers with a single-SKU
Model # W1000
Assembled
Modular for Easy Feature/Technology Upgrades
The base unit is a one-port Ethernet/USB ADSL2+ modem. An expansion port is included on top of the unit for attaching the wireless expansionmodule.All other add-on modulessnap directly into the base unit with no cables, adapters, CDs or configuration required bythe end user, making upgradesasimple plug-and-play process that can be handled by the consumer. Modular add-ons include a Wireless Expansion Module, 4-port Ethernet switch for w ired networking, a HomePlug AV adapter for powerline networking, and a VoIP adapter.
Features
Integrated Wired Networking using 1 Port USB and 1 Port
10/100 Mbps Ethernet
Full-rate ADSL 2/2+ modem - supports data rates of up to
24 Mbps downstream and up to 1 Mbps upstream*
Exceeds performance of the DSL Forum specification
Loop reach of up to 18,000 feet using ADSL and 18,600 feet
using ADSL 2
Tested and compatible with all major DSLAMs
Advanced security: Firewall,Stateful Packet Inspection, NAT,
website blocking, web service blocking, Internet traffic logging, Denial of Service (DOS) protection
* Depends on the services offered by the Internet Service Provider.
Model # M1000
Model # V2000
Other features include:
Advanced Modem Diagnostics
DHCP Server Option
Compliant with DSL Forum TR048
Rate and Reach Requirements
Customizable Firewall
DMZ Hosting
DNS Server, Relay
Dynamic Rate Adaptation
Independent upstream and
downstream data rate provisioning
LAN IP Address Selection
Multiple PVC supported
NAT Services Blocking
Port Forwarding
Real-time diagnostics
Remote Management
Services Blocking
Static Routing
Unnumbered Mode Support
User Friendly GUI
VPN Pass Through
WAN IP & LAN IP Address
Selection
Website Blocking
Modular DSLRouter
Technical Specifications
Creative Solutions for the Digital Life
Features
ADSL
ATM
OAM
Wireless
Module
VoIP Module
Ethernet
Descriptions
ITU G.992.1 (G.dmt), G.992.2 (G.Lite), G.994.1
(G.hs), G.992.3 (G.dmt.bis), G.992.4 (G.lite.bis), G.992.5 (ADSL2plus) ANSI T1.413 Issue2
ATM User-Network Interface, Version 3.1,
Section 3.
- The full VPI range (0 – 4095) and VCI range (1 – 65535) are supported.
- Adaptation Layers AAL5, AAL2 and AAL0 are supported.
- The traffic shaping function supports traffic classes CBR, VBR (real time and non-real time) and UBR (with PCR limiting).
ITU-T Recommendation I.610 B-ISDN
Operation and Maintenance Principles and Operations.
- F5 segment and end-to-end loopback cells
IEEE 802.11g
IEEE 802.11b
IEEE 802.1x
WPA/WPA2
WEP 64/128 bit encryption
SSID Broadcast enable/disable
WPS
WMM
Multi SSID (4)
Auto Channel Selection
2 FXS ports for phone/fax connection
Modular/Stand-alone mode for Home/
On-the-Road use Remote XML auto configuration
Remote auto firmware upgrade
Echo cancellation for clear calls
Major Codecs (G.711a/u-law, G.729A, G.729AB,
G.726, G.723.1) Caller-ID Type I/Type II
Call hold, call waiting, call forwarding, call
transfer, 3-way conference SIP/RTP packet TOS tagging
ISO/IEC 8802-3; ANSI/IEEE standard
802.3 part 3.
- IEEE 802.3x – Full Duplex capable
- IEEE 802.3u – Auto negotiation
RFC 1213 "Management Information Base for
Network management of TCP/IP-based internet: MIB-II". D-I-X, "The Ethernet - A Local Area Network:
Data Link Layer and Physical Layer Specifications".
Bridge
IP
ARP
ICMP
UDP
TCP
IP Router
RIP
DHCP Server
DHCP Client
Transparent MAC level bridge for Ethernet-like devices
in conformance with the IEEE802.1d specification. ISO/IEC 10038:1993 (E), Std 802.1D.
RFC1213 "Management Information Base for Network
Management of TCP/IP-based internet: MIB-II". RFC1493 “Definitions of Managed Objects for Bridges”.
RFC 791 “Internet Protocol”.
RFC 950“Internet Standard Subnetting Procedure”.
RFC 1122 “Requirements for Internet hosts
– communication layers”. RFC 1191 “Path MTU discovery”.
RFC 1213 “Management Information Base for
Network Management of TCP/IP-based Internet”. RFC 894 “Standard for the transmission of IP
datagrams over Ethernet networks”.
RFC 826 “Ethernet Address Resolution Protocol:
Or converting network protocol addresses to 48.bit Ethernet address for transmission on Ethernet hardware”.
RFC 792 “Internet Control Message Protocol”.
RFC 768 “User Datagram Protocol”.
RFC 793 “Transmission Control Protocol”.
Support Static Route
Support unnumbered mode
RFC 1058 “Routing Information Protocol”.
RFC 1723 “RIP Version 2 - Carrying Additional
Information”. RFC 2453 “RIP Version 2”.
RFC 1812 “Requirements for IPVersion 4 Routers”.
RFC 1191 “Path MTU discovery”.
RFC 2131 “Dynamic Host Configuration Protocol”.
RFC 2132 “DHCP Options and BOOTP Vendor
Extensions”.
RFC 2131 “Dynamic Host Configuration
Protocol”. RFC 2132 “DHCP Options and BOOTP Vendor
Extensions”. The DHCP client supports the following
minimal subset of options described in RFC2132:
- Requested IP Address (requested by default; is mandatory) Parameter Request list (subnet-mask only)
­IP Address Lease time (dhcp-lease-time)
­Client-identifier (dhcp-client-identifier)
­Default route (routers)
­DNS Proxy Server
-
Loading...
+ 2 hidden pages