Acer X1111 User Manual

Download

Page 1

Acer Projector

X1111/X1111H/X1111A/

X1211/X1211H/X1211S/X1211K/

X1213P/X1213PH/X1311KW/

X1313PW/X1313PWH

Series User's Guide

Page 2

Acer Projector X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH Series User's Guide Original Issue: 8/2011

Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new editions of this manual or supplementary documents and publications. This company makes no representations or warranties, either expressed or implied, with respect to the contents hereof and specifically disclaims the implied warranties of merchantability or fitness for a particular purpose.

Record the model number, serial number, purchase date and place of purchase information in the space provided below. The serial number and model number are recorded on the label affixed to your projector. All correspondence concerning your unit should include the serial number, model number and purchase information.

No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronically, mechanically, by photocopy, recording or otherwise, without the prior written permission of Acer Incorporated.

Acer Projector X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH Series

Model number: __________________________________

Serial number: ___________________________________

Date of purchase: ________________________________

Place of purchase: ________________________________

Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.

"HDMI registered trademarks of HDMI Licensing LLC."

, the HDMI logo and High-Definition Multimedia Interface are trademarks or

Page 3

Information for Your Safety and Comfort

Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product.

Turning the product off before cleaning

Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

Caution for plug as disconnecting device

Observe the following guidelines when connecting and disconnecting power to the external power supply unit:

• Install the power supply unit before connecting the power cord to the AC

power outlet.

• Unplug the power cord before removing the power supply unit from the

projector.

• If the system has multiple sources of power, disconnect power from the

system by unplugging all power cords from the power supplies.

Caution for Accessibility

Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to

disconnect power to the equipment, be sure to unplug the power cord from the electrical outlet.

iii

Warnings!

• Do not use this product near water.

• Do not place this product on an unstable cart, stand or table. If the product

falls, it could be seriously damaged.

• Slots and openings are provided for ventilation to ensure reliable

operation of the product and to protect it from overheating. These openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug or other similar surface.

This product should never be placed near or over a radiator or heat register, or in a built-in installation unless proper ventilation is provided.

• Never push objects of any kind into this product through cabinet slots as

they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind onto or into the product.

Page 4

• To avoid damage of internal components and to prevent battery leakage,

do not place the product on a vibrating surface.

• Never use it under sporting, exercising, or any vibrating environment

which will probably cause unexpected short current or damage rotor devices, lamp.

Using electrical power

• This product should be operated from the type of power indicated on the

marking label. If you are not sure of the type of power available, consult your dealer or local power company.

• Do not allow anything to rest on the power cord. Do not locate this

product where people will walk on the cord.

• If an extension cord is used with this product, make sure that the total

ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating.

• Do not overload a power outlet, strip or receptacle by plugging in too

many devices. The overall system load must not exceed 80% of the branch circuit rating. If power strips are used, the load should not exceed 80% of the power strip's input rating.

• This product's AC adapter is equipped with a three-wire grounded plug.

The plug only fits in a grounded power outlet. Make sure the power outlet is properly grounded before inserting the AC adapter plug. Do not insert the plug into a non-grounded power outlet. Contact your electrician for details.

Warning! The grounding pin is a safety feature. Using a power outlet that is not properly grounded may result in electric shock and/or injury.

Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product.

• Use the product only with the supplied power supply cord set. If you need

to replace the power cord set, make sure that the new power cord meets the following requirements: detachable type, UL listed/CSA certified, VDE approved or its equivalent, 4.6 meters (15 feet) maximum length.

Page 5

Product servicing

Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel.

Unplug this product from the wall outlet and refer servicing to qualified service personnel when:

• the power cord or plug is damaged, cut or frayed

• liquid was spilled into the product

• the product was exposed to rain or water

• the product has been dropped or the case has been damaged

• the product exhibits a distinct change in performance, indicating a need

for service

• the product does not operate normally after following the operating

instructions

Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition.

Warning! For safety reasons, do not use non-compliant parts when adding or changing components. Consult your reseller for purchase options.

Your device and its enhancements may contain small parts. Keep them out of the reach of small children.

Additional safety information

• Do not look into the projector's lens when the lamp is on. The bright light

may hurt your eyes.

• Turn on the projector first and then signal sources.

• Do not place the product in the following environments:

• Space that is poorly ventilated or confined. At least 50cm clearance from walls and free flow of air around the projector are necessary.

• Locations where temperatures may become excessively high, such as inside of a car with all windows rolled up.

• Locations where excessive humidity, dust, or cigarette smoke may contaminate optical components, shorten the life span and darken the image.

• Locations near fire alarms.

• Locations with an ambient temperature above 40 ºC/104 ºF.

• Locations where the altitudes are higher than 10000 feet.

• Unplug immediately if there is something wrong with your projector. Do

not operate if smoke, strange noise or odor comes out of your projector. It

Page 6

might cause fire or electric shock. In this case, unplug immediately and contact your dealer.

• Do not keep using this product to break or drop it. In this case contact your

dealer for inspection.

• Do not face the projector lens to the sun. It can lead to fire.

• When switching the projector off, please ensure the projector completes

its cooling cycle before disconnecting power.

• Do not frequently turn off the main power abruptly or unplug the

projector during operation. The best way is to wait for the fan to stop before turning main power off.

• Do not touch the air outlet grille and bottom plate which become hot.

• Clean the air filter frequently. The temperature inside may rise and cause

damage when the filter/ventilation slots are clogged with dirt or dust.

• Do not look into the air outlet grille when projector is operating. It may

hurt your eyes.

• Always open the lens shutter or remove the lens cap when the projector is

on.

• Do not block the projector lens with any object when the projector is

under operation as this could cause the object to become heated and deformed or even cause a fire. To temporarily turn off the lamp, press HIDE on the remote control.

• The lamp becomes extremely hot during operation. Allow the projector to

cool for approximately 45 minutes prior to removing the lamp assembly for replacement.

• Do not operate lamps beyond the rated lamp life. It could cause it to break

on rare occasions.

• Never replace the lamp assembly or any electronic components unless the

projector is unplugged.

• The product will detect the life of the lamp itself. Please be sure to change

the lamp when warning messages display.

• When changing the lamp, please allow the projector to cool down, and

follow all changing instructions.

• Reset the "Lamp Hour Reset" function from the Onscreen Display

"Management" menu after replacing the lamp module.

• Do not attempt to disassemble this projector. There are dangerous high

voltages inside which may hurt you. The only user serviceable part is the lamp which has its own removable cover. Refer servicing only to suitable qualified professional service personnel.

• Do not stand the projector on end vertically. It may cause the projector to

fall over, causing injury or damage.

• This product is capable of displaying inverted images for ceiling mount

installation. Only use acer ceiling mount kit for mounting the projector and ensure it is securely installed.

Page 7

vii

"Lamp(s) contain Mercury, Dispose Properly."

Caution for Listening

To protect your hearing, follow these instructions.

• Increase the volume gradually until you can hear clearly and comfortably.

• Do not increase the volume level after your ears have adjusted.

• Do not listen to music at high volumes for extended periods.

• Do not increase the volume to block out noisy surroundings.

• Decrease the volume if you can't hear people speaking near you.

Disposal instructions

Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/sustainability01.htm

Mercury advisory

For projectors or electronic products containing an LCD/CRT monitor or display:

Lamp(s) inside this product contain mercury and must be recycled or disposed of according to local, state or federal laws. For more information, contact the Electronic Industries Alliance at www.eiae.org. For lamp-specific disposal information, check www.lamprecycle.org

Page 8

viii

First Thing First

Usage Notes

Do:

• Turn off the product before cleaning.

• Use a soft cloth moistened with mild detergent to clean the display

housing.

• Disconnect the power plug from AC outlet if the product is not being used

for a long period of time.

Don't:

• Block the slots and openings on the projector provided for ventilation.

• Use abrasive cleaners, waxes or solvents to clean the unit.

• Use under the following conditions:

• In extremely hot, cold or humid environments.

• In areas susceptible to excessive dust and dirt.

• Near any appliance that generates a strong magnetic field.

• Place in direct sunlight.

Precautions

Follow all warnings, precautions and maintenance as recommended in this user's guide to maximize the life of your unit.

Warning:

• Do not look into the projector's lens when the lamp is on. The bright light may hurt

your eyes.

• To reduce the risk of fire or electric shock, do not expose this product to rain or

moisture.

• Please do not open or disassemble the product as this may cause electric shock.

• When changing the lamp, please allow the projector to cool down, and follow all

changing instructions.

• This product will detect the life of the lamp itself. Please be sure to change the lamp

when it shows warning messages.

• Reset the "Lamp Hour Reset" function from the Onscreen Display "Management"

menu after replacing the lamp module.

• When switching the projector off, please ensure the projector completes its cooling

cycle before disconnecting power.

• Turn on the projector first and then the signal sources.

• Do not use lens cap when projector is in operation.

• When the lamp reaches the end of its life, it will burn out and may make a loud

popping sound. If this happens, the projector will not turn back on until the lamp module has been replaced. To replace the lamp, follow the procedures listed under "Replacing the Lamp".

Page 9

Information for Your Safety and Comfort iii

First Thing First viii

Usage Notes viii

Precautions viii

Introduction 1

Product Features 1

Package Overview 2

Projector Overview 3

Projector Outlook 3

Control Panel 4

Remote Control Layout 5

Getting Started 7

Connecting the Projector 7

Turning the Projector On/Off 8

Turning On the Projector 8

Turning Off the Projector 9

Adjusting the Projected Image 10

Adjusting the Height of the Projected Image 10

How to Optimize Image Size and Distance 11

How to Get a Preferred Image Size by Adjusting

Distance and Zoom 14

User Controls 17

Installation Menu 17

Acer Empowering Technology 18

Onscreen Display (OSD) Menus 19

Color 20

Image 22

Setting 26

Management 29

Audio 30

Timer 30

Language 31

Page 10

Appendices 32

Troubleshooting 32

LED & Alarm Definition Listing 36

Replacing the Lamp 37

Ceiling Mount Installation 38

Specifications 41

Compatibility Modes 44

Regulations and safety notices 48

Page 11

English

Introduction

Product Features

This product is a single-chip DLP® projector, including the following outstanding features:

• DLP

• X1111/X1111H/X1111A: Native 800 x 600 SVGA resolution

• Acer ColorBoost technology delivers vivid, life-like images

• High brightness and contrast ratio

• Versatile display modes (Bright, Presentation, Standard, Video, Picture,

• NTSC/PAL/SECAM compatible and HDTV (720p, 1080i, 1080p) supported

• Lower power consumption and economy (ECO) mode extends lamp life

• Dynamic Black / Extreme Dimming functions help decrease lamp power

• Acer EcoProjection Technology delivers Intelligent power management

• Empowering Key reveals Acer Empowering Technology functions (Acer

• Advanced keystone correction delivers optimum presentations

• Multi-language Onscreen Display (OSD) menus

• Manual focus/zoom projection lens

• 2X digital zoom and pan move function

• Microsoft

technology

Auto / 4:3 / 16:9 aspect ratio supported X1211/X1211H/X1211S/X1211K/X1213P/X1213PH: Native 1024 x 768 XGA resolution Auto / 4:3 / 16:9 aspect ratio supported X1311KW/X1313PW/X1313PWH: Native 1280 x 800 WXGA resolution Auto/ Full / 4:3 /16:9 / L.Box aspect ratio supported

Game, Education, User) enable optimum performance in any situation

consumption and further extend lamp life Dynamic Black: If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced. Extreme Dimming: The projector will decrease the power consumption of the lamp by up to 70% when no input signal can be detected for 5 minutes.

approach and physical efficiency improvement

eView, eTimer, ePower Management) for easy adjustment of settings

Windows® 2000, XP, 7, Vista®, Macintosh OS compliant

Page 12

English

Quick Start Guide

Package Overview

This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing.

Projector with lens cap Power cord VGA cable

Acer Projector

Security Card

Acer Projector

Security card User’s guide (CD-ROM) Remote control

This CD contains

• User’s manual

• Quick Start Guide

• Acrobat

Reader

www.acer.com

ENTER

SD/USB AHDMI/DV I LAN/WiFi USBB

BACK

PgUp

PgDn

Quick start guide Battery x 2 Carrying case

Dust filter

(Optional)

Page 13

English

Projector Overview

(X1211S)

(X1111/X1111H/X1111A/X1211/

X1211H/X1211K/X1213P/X1213PH/

X1311KW/X1313PW/X1313PWH)

(X1111H/X1211H/X1213PH/ X1313PWH)

(X1111)

(X1111A/X1211/X1211S/X1211K/X1213P/ X1311KW/X1313PW)

Projector Outlook

Front / upper side

# Description # Description 1 Control panel 5 Power key and Power indicator LED 2 Projection lens 6 Zoom ring 3 Elevator button 7 Focus ring 4 Lens cap 8 Remote control receiver

Rear side

# Description # Description 1 USB connector 6 Audio input connector

2 RS232 connector 7 Tilt adjusting wheel 3 Monitor loop-through output connector 8 Power socket 4 PC analog signal/HDTV/component

video input connector

5 S-Video input connector

Composite video input connector

Audio output connector

9 Kensington™ lock port

10 HDMI input connector

Page 14

English

Control Panel

# Function Description 1 LAMP Lamp Indicator LED 2 IR Remote control receiver 3 Keystone Adjusts image distortion caused by tilting

projection (±40 degrees).

4 RESYNC Automatically synchronizes the projector

to the input source.

5MENU

• Launches the Onscreen Display (OSD)

menu, returns to the previous step for the OSD menu operation or exits the OSD menu.

• Confirms your selection of items.

6 Power key and Power

indicator LED 7 TEMP Temp Indicator LED 8 SOURCE Chooses RGB, component video, S-Video,

9 Four directional select keys Selects items or makes adjustments to your

10 Empowering key Enables unique Acer functions: eView,

Refer to the "Turning the Projector On/ Off" section.

composite video or HDTV source.

selection.

eTimer, ePower Management.

Page 15

English

PgDn

PgUp

SD/USB A HDMI/DVI LAN/WiFi USBB

ENTER

BACK

(X1111H/X1111A/X1211/X1211H/X1211S/

X1213P/X1213PH/X1313PW/X1313PWH)

(X1111/X1211K/

X1311KW)

Remote Control Layout

BACK

ENTER

PgUp

PgDn

SD/USB A HDMI/DVI LAN/WiFi USBB

# Function Description 1 POWER Refer to the "Turning the Projector On/Off" section. 2 ASPECT RATIO To choose the desired aspect ratio. 3ZOOM

4 RESYNC Automatically synchronizes the projector to the input

5 Keystone Adjusts image distortion caused by tilting projection

Four directional select keys

6 Keypad 0~9 Press "0~9" to input a password in the "Setting" >

7 VGA To change source to VGA. This connection supports

8 COMPONENT (No function) 9 S-VIDEO To change source to S-Video.

• Zooms the projector display in or out.

• When a USB cable is connected, it performs the

same function as the left mouse button. (For X1111H/X1111A/X1211/X1211H/X1211S/X1211K/ X1213P/X1213PH/X1311KW/X1313PW/ X1313PWH)

source.

(±40 degrees).

Selects items or makes adjustments to your selection.

"Security" OSD.

analog RGB, YPbPr (480p/576p/720p/1080i/1080p), and YCbCr (480i/576i).

Page 16

English

(X1111H/X1111A/X1211/ X1211H/X1211S/X1213P/ X1213PH/X1313PW/X1313PWH)

# Function Description

10 HDMI™;

HDMI™/DVI

To change source to HDMI™ (or DVI) (for the model with HDMI™ or DVI connector). (For X1111H/X1211H/ X1213PH/X1313PWH)

11 Infrared

Sends signals to the projector.

transmitter

12 Empowering key Enables unique Acer functions: eView, eTimer,

ePower Management.

13 FREEZE

• To pause the screen image.

• When a USB cable is connected, it performs the

same function as the right mouse button. (For X1111H/X1111A/X1211/X1211H/X1211S/X1211K/ X1213P/X1213PH/X1311KW/X1313PW/ X1313PWH)

14 HIDE Press "HIDE" to hide screen image; press again to

display the image.

15 SOURCE Chooses RGB, component video, S-Video, composite

video or HDTV source.

16 MENU

• Launches the Onscreen Display (OSD) menu,

returns to the previous step for the OSD menu operation or exits the OSD menu.

• Confirms your selection of items.

17 PgUp/PgDn For computer mode only. Use this button to select the

18 VIDEO To change source to Composite video. 19 MUTE To turn on/off the volume. 20 WIRELESS;

LAN/WiFi

Rewind Play/Pause Stop

Fast-forward 22 SD/USB A (No function) 23 USB B (No function)

next or previous page. This function is only available when connected to a computer via a USB cable. (For X1111H/X1111A/X1211/X1211H/X1211S/X1211K/ X1213P/X1213PH/X1311KW/X1313PW/X1313PWH)

(No function)

(X1111/X1211K/X1311KW)

Page 17

English

Getting Started

DVD player, Set-top box,

HDTV receiver

VGA

RS232

Video/S-Video

Output

Display

Speakers

Connecting the Projector

# Description # Description

1Power cord 6S-Video cable

2 VGA cable 7 RS232 cable

3 VGA to component video/HDTV

adapter

4 Composite video cable 9 3 RCA component cable

5 Audio cable 10 HDMI cable

Note: To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with the projector.

8 USB cable

Page 18

English

2&3

Lens cap

Turning the Projector On/Off

Turning On the Projector

1 Remove the lens cap.

2 Ensure that the power cord and signal cable are securely connected.

The Power LED will light red.

3 Turn on the projector by pressing (POWER) on the control panel or

remote control, and the Power indicator LED will turn blue.

4 Turn on your source (computer, notebook, video player, etc.). The

projector will detect your source automatically.

• If the screen displays "No Signal", please make sure the signal cables are securely connected.

• If you connect to multiple sources at the same time, use "SOURCE" on the control panel or remote control, or the direct source key on the remote control to switch between inputs.

Page 19

English

Turning Off the Projector

1 To turn the projector off, press the power button. This message

appears:

"Please press the power button again to complete the shutdown process."

Press the power button again.

2 The LED power indicator will turn solid red to indicate standby mode.

3 It is now safe to unplug the power cord.

When Instant Resume is selected:

1 The LED power indicator will turn RED and blink rapidly after the

projector is turned off, and the fan(s) will continue to operate for about 2 minutes to ensure that the system cools properly.

2 As long as the power cord remains plugged in, you can press the

power button to turn the projector immediately back on anytime during the 2-minute shutdown process.

3 Once the system has finished cooling, the LED power indicator will

stop blinking and turn solid red to indicate standby mode.

4 It is now safe to unplug the power cord.

Warning indicators:

• "Projector Overheated. Lamp will automatically turn off soon." This onscreen message indicates that the projector has overheated. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will turn solid red. Contact your local dealer or service center.

• "Fan failed. Lamp will automatically turn off soon." This onscreen message indicates that the fan has failed. The lamp will automatically turn off, the projector will automatically shut down, and the LED temp indicator will blink. Contact your local dealer or service center.

Note: Whenever the projector automatically shuts down and

the

LED lamp indicator turns solid red, contact your local

reseller or service center

Page 20

English

Tilt adjusting wheel

Elevator button

Adjusting the Projected Image

Adjusting the Height of the Projected Image

The projector is equipped with an elevator foot for adjusting the image height.

To raise the image:

1 Press the elevator button.

2 Raise the image to the desired height angle, then release the button

to lock the elevator foot into position.

3 Use Tilt adjusting wheel to fine-tune the display angle.

To lower the image:

1 Press the elevator button.

2 Lower the image to the desired height angle, then release the button

to lock the elevator foot into position.

3 Use Tilt adjusting wheel to fine-tune the display angle.

Elevator foot

Page 21

English

3 m Desired distance

Height: 121 cm

Height: 132 cm From base to top of image

72"

79"

How to Optimize Image Size and Distance

Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen.

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH

If the projector is 3 m from the screen, good image quality is possible for image sizes between 72" and 79".

Note: Remind as below figure, the space of 132 cm height is required when the projector is located at 3 m distance.

Desired

Distance

(m)

< A >

Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom)

Diagonal

(inch)

W (cm) x H (cm)

From base to top of image

(cm)

< C >

Diagonal

(inch)

W (cm) x H (cm)

From base to top of image

1.5 36 74 x 55 60 40 81 x 60 67 2 48 98 x 74 80 53 108 x 81 89

2.5 60 123 x 92 101 66 134 x 101 111 3 72 147 x 110 121 79 161 x 121 132

3.5 84 172 x 129 141 93 188 x 141 156 4 96 196 x 147 161 106 215 x 161 178

4.5 108 221 x 165 181 119 242 x 181 199 5 120 245 x 184 201 132 269 x 202 221 6 144 294 x 221 241 159 323 x 242 267 7 168 343 x 257 282 185 376 x 282 310 8 192 392 x 294 322 212 430 x 323 355 9 216 441 x 331 362 238 484 x 363 399

10 241 490 x 368 404 265 538 x 403 444 11 265 539 x 404 444 291 591 x 444 488 12 289 588 x 441 484 318 645 x 484 533

Zoom Ratio: 1.1 x

(cm)

< C >

Page 22

English

3 m Desired distance

Height: 128 cm

Height: 142 cm From base to top of image

84"

93"

• X1311KW/X1313PW/X1313PWH

If the projector is 3 m from the screen, good image quality is possible for image sizes between 84" and 93".

Note: Remind as below figure, the space of 142 cm height is required when the projector is located at 3 m distance.

Desired

Distance

(m)

< A >

Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom)

Diagonal

(inch)

W (cm) x H (cm)

From base to top of image

(cm)

< C >

Diagonal

(inch)

W (cm) x H (cm)

From base to top of image

1.5 42 91 x 57 64 46 100 x 63 70 2 56 121 x 76 85 62 133 x 83 94

2.5 70 152 x 95 107 77 167 x 104 117 3 84 182 x 114 128 93 200 x 125 142

3.5 98 212 x 133 149 108 233 x 146 165 4 113 242 x 152 172 124 267 x 167 189

4.5 127 273 x 170 194 139 300 x 188 212 5 141 303 x 189 215 155 333 x 208 236 6 169 364 x 227 258 186 400 x 250 283 7 197 424 x 265 300 217 467 x 292 331 8 225 485 x 303 343 248 533 x 333 378 9 253 545 x 341 386 279 600 x 375 425

10 281 606 x 379 428 310 667 x 417 472 11 310 667 x 417 472 340 733 x 458 518

Zoom Ratio: 1.1 x

(cm)

< C >

Page 23

English

3 m Desired distance

Height: 219 cm

Height: 262 cm From base to top of image

137"

164"

• X1211S

If the projector is 3 m from the screen, good image quality is possible for image sizes between 137" and 164".

Note: Remind as below figure, the space of 262 cm height is required when located at 3 m distance.

Desired

Distance

(m)

< A >

Minimum Screen Size (Min zoom) Maximum Screen Size (Max zoom)

Diagonal

(inch)

W (cm) x H (cm)

From base to top of image

(cm)

< C >

Diagonal

(inch)

W (cm) x H

(cm)

From base to top of image

1 46 93 x 69 74 55 111 x 83 88

1.5 68 139 x 104 109 82 167 x 125 131

2 91 185 x 139 146 109 222 x 167 174

2.5 114 231 x 174 182 137 278 x 208 219

3 137 278 x 208 219 164 333 x 250 262

3.5 159 324 x 243 254 191 389 x 292 306

4 182 370 x 278 291 219 444 x 333 350

4.5 205 417 x 313 328 246 500 x 375 394

5 228 463 x 347 365 273 556 x 417 437

6 273 556 x 417 437 328 667 x 500 525

Zoom Ratio: 1.2 x

(cm)

< C >

Page 24

English

Desired distance

Height: 117 cm From base to top of image

70" Desired image size

2.6 m

2.9 m

How to Get a Preferred Image Size by Adjusting Distance and Zoom

The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring.

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/X1213P/X1213PH

To obtain an image size of 70", set the projector at a distance between 2.6 m and 2.9 m from the screen and adjust the zoom level accordingly.

Desired Image Size Distance (m) Top (cm)

Diagonal (inch)

< A >

W (cm) x H (cm)

Max zoom

Min zoom

< C >

40 81 x 61 1.5 1.7 67

50 102 x 76 1.9 2.1 84

60 122 x 91 2.3 2.5 101

70 142 x 107 2.6 2.9 117

80 163 x 122 3.0 3.3 134

90 183 x 137 3.4 3.7 151

100 203 x 152 3.8 4.2 168

120 244 x 183 4.5 5.0 201

150 305 x 229 5.7 6.2 251

180 366 x 274 6.8 7.5 302

200 406 x 305 7.6 8.3 335

250 508 x 381 9.4 10.4 419

300 610 x 457 11.3 503

Zoom Ratio: 1.1 x

From base to top of

image < D >

Page 25

English

• X1311KW/X1313PW/X1313PWH

Desired distance

Height: 107 cm From base to top of image

70" Desired image size

2.3 m

2.5 m

To obtain an image size of 70" set the projector at a distance between 2.3 m and 2.5 m from the screen and adjust the zoom level accordingly.

Desired Image Size Distance (m) Top (cm)

Diagonal (inch)

< A >

W (cm) x H (cm)

40 86 x 54 1.3 1.4 61

50 108 x 67 1.6 1.8 76

60 129 x 81 1.9 2.1 91

70 151 x 94 2.3 2.5 107

80 172 x 108 2.6 2.8 122

90 194 x 121 2.9 3.2 137

100 215 x 135 3.2 3.6 152

120 258 x 162 3.9 4.3 183

150 323 x 202 4.8 5.3 229

180 388 x 242 5.8 6.4 274

200 431 x 269 6.5 7.1 305

250 538 x 337 8.1 8.9 381

300 646 x 404 9.7 457

Zoom Ratio: 1.1 x

Max zoom

Min zoom

< C >

From base to top of

image < D >

Page 26

English

Desired distance

Height: 112 cm From base to top of image

70" Desired image size

1.3 m

1.5 m

• X1211S

To obtain an image size of 70" set the projector at a distance between 1.3 m and 1.5 m from the screen and adjust the zoom level accordingly.

Desired Image Size Distance (m) Top (cm)

Diagonal (inch)

< A >

W (cm) x H (cm)

50 102 x 76 0.9 1.1 80

60 122 x 91 1.1 1.3 96

70 142 x 107 1.3 1.5 112

80 163 x 122 1.5 1.8 128

90 183 x 137 1.6 2.0 144

100 203 x 152 1.8 2.2 160

120 244 x 183 2.2 2.6 192

150 305 x 229 2.7 3.3 240

180 366 x 274 3.3 4.0 288

200 406 x 305 3.7 4.4 320

250 508 x 381 4.6 5.5 400

300 610 x 457 5.5 480

Zoom Ratio: 1.2 x

Max zoom

Min zoom

< C >

From base to top of

image < D >

Page 27

English

(X1111)

(X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH)

User Controls

Installation Menu

The Installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen.

1 Turn on the projector by pressing (POWER) on the control panel or

remote control.

2 Press "MENU" on the control panel or remote control to launch the

OSD for projector installation and maintenance.

3 The background pattern acts as a guide to adjusting the calibration

and alignment settings, such as screen size and distance, focus and more.

4 The Installation menu includes the following options:

• Projection method

• Menu location

• Keystone settings

• Language settings

• Reset to factory default functions

Use the up and down arrow keys to select an option, the left and right arrow keys to adjust selected option settings, and the right arrow key to enter a submenu for feature setting. The new settings will be saved automatically upon exiting the menu.

5 Press "MENU" anytime to exit the menu and return to the Acer

welcome screen.

Page 28

English

Acer Empowering Technology

Empowering Key

Acer eView Management

Acer eTimer Management

Acer ePower Management

Acer Empowering Key provides three Acer unique functions: "Acer eView Management", "Acer eTimer Management", and "Acer ePower

Management". Press " " for more than one second to launch the Onscreen Display main menu to modify its function.

Press " " to launch "Acer eView Management". "Acer eView Management" is for display mode selection. Please refer to the "Onscreen Display (OSD) Menus" section for more details.

Press " " to launch "Acer eTimer Management". "Acer eTimer Management" provides the reminding function for presentation time control. Please refer to the "Onscreen Display (OSD) Menus" section for more details.

Press " " to launch "Acer ePower Management". "Acer ePower Management"provides you one shortcut to save the lamp and projector’s life. Please refer to the "Onscreen Display (OSD) Menus" section for more details.

Page 29

English

Main menu

Submenu

Setting

Onscreen Display (OSD) Menus

The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings.

Using the OSD menus

• To open the OSD menu, press "MENU" on the control panel or remote

control.

• When the OSD is displayed, use to select an item in the main menu.

After selecting the desired main menu item, press to enter a submenu for feature setting.

• Use to select the desired item and adjust the settings by using

• Select the next item to be adjusted in the submenu and adjust as described

above.

• Press "MENU" on the control panel or remote control, the screen will

return to the main menu.

• To exit the OSD menu, press "MENU" on the control panel or remote

control again. It will close and the projector will automatically save the new settings.

Page 30

English

Color

Display Mode

Wall Color

There are many factory presets optimized for various types of images.

• Bright: For brightness optimization.

• Presentation: For meeting presentation with higher

brightness.

• Standard: For common environment.

• Video: For playing video in a bright environment.

• Picture: For graphic picture.

• Game: For game content.

• Education: For education environment.

• User: Memorize user’s settings.

Use this function to choose a proper color according to the wall. There are several choices, including White, Light Yellow, Light Blue, Pink and Dark Green. It will compensate the color deviation due to the wall color to show the correct image tone.

Adjusts the brightness of the image.

Brightness

Contrast

• Press to darken the image.

• Press to lighten the image.

Controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.

• Press to decrease the contrast.

• Press to increase the contrast.

Page 31

English

Color Temperature

Degamma

Color R Adjusts the red color. Color G Adjusts the green color. Color B Adjusts the blue color.

Saturation

Adjusts the color temperature. At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer.

Effects the representation of dark scenery. With greater gamma value, dark scenery will look brighter.

Adjusts a video image from black and white to fully saturated colors.

• Press to decrease the amount of color in the

image.

• Press to increase the amount of color in the

image.

Adjusts the color balance of red and green.

Tint

• Press to increase the amount of green in the

image.

• Press to increase the amount of red in the image.

If turned on, the projector dynamically adjusts the power consumption of the lamp according to the brightness of

Dynamic Black

the image being projected. When projecting darker images the power consumption will be reduced and the contrast of the image will also be enhanced.

Note: "Saturation" and "Tint" functions are not supported under computer mode.

Page 32

English

(X1111)

(X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH)

Image

Projection (X1111)

Projection Mode (X1111H/ X1111A/X1211/ X1211H/X1211S/ X1211K/X1213P/ X1213PH/ X1311KW/ X1313PW/ X1313PWH)

• Front-Desktop: The factory default setting.

• Front-Ceiling: When you select this function, the

projector inverts the image for ceiling-mounted projection.

• Rear-Desktop: When you select this function, the

projector reverses the image so that you can project behind a translucent screen.

• Rear-Ceiling: When you select this function, the

projector reverses and inverts the image at same time. You can project from behind a translucent screen with ceiling mounted projection.

• Front: The factory default setting.

• Rear: Reverses the image so you can project from

behind a translucent screen.

Page 33

English

Projection Location (X1111H/ X1111A/X1211/ X1211H/X1211S/ X1211K/X1213P/ X1213PH/ X1311KW/ X1313PW/ X1313PWH)

Aspect Ratio

Keystone (X1111)

• Auto: Automatically adjusts projection location of

image.

• Desktop

• Ceiling: Turns the image upside down for ceiling-

mounted projection.

Use this function to choose your desired aspect ratio.

• Auto: Keeps the image with original width-height ratio

and maximizes the image to fit native horizontal or vertical pixels.

• Full (X1313PW/X1313PWH): The image will be displayed

making full use of the horizontal and vertical pixels.

• 4:3: The image will be scaled to fit the screen and

displayed using a 4:3 ratio.

• 16:9: The image will be scaled to fit the screen and

displayed using a 16:9 ratio.

• L.Box (X1313PW/X1313PWH): Keeps the original signal

aspect ratio and zooms in by 1.333 times.

Adjusts image distortion caused by tilting projection (±40 degrees).

Auto Keystone (X1111H/ X1111A/X1211/ X1211H/X1211S/ X1211K/X1213P/ X1213PH/ X1311KW/ X1313PW/ X1313PWH)

Manual Keystone (for X1111H/ X1111A/X1211/ X1211H/X1211S/ X1211K/X1213P/ X1213PH/ X1311KW/ X1313PW/ X1313PWH)

Automatically adjusts image distortion caused by tilting projection (±40 degrees).

Manually adjusts image distortion caused by tilting projection (±40 degrees).

<Note> The Manual Keystone function is unavailable under Auto Keystone setting to "On".

Page 34

English

Adjusts the sharpness of the image.

Sharpness

H. Position (Horizontal Position)

V. Position (Vertical Position)

Frequency

Tracking

3D Sync Invert

• Press to decrease the sharpness.

• Press to increase the sharpness.

• Press to move the image left.

• Press to move the image right.

• Press to move the image down.

• Press to move the image up.

Changes the projector’s refresh rate to match the frequency of your computer’s graphics card. If you experience a vertical flickering bar in the projected image, use this function to correct it.

Synchronizes the signal timing of the display with the graphics card. If you experience an unstable or flickering image, use this function to correct it.

Selects "NVIDIA 3D Vision" or "DLP 3D" to enable the 3D function supported by NVIDIA or TI DLP 3D technology.

• NVIDIA 3D Vision (X1111)

Select this item while using NVIDIA 3D glasses, IR emitter, NVIDIA graphics card and NVIDIA compliant 3D games or 3D movies with corresponding SW player. Please visit NVIDIA URL (http://www.nvidia.com/object/ 3D_Vision_Requirements.html) to check detailed system configuration.

• DLP 3D

Select this item while using DLP 3D glasses, quad buffer (NVIDIA/ATI...) graphics card and HQFS format file or DVD with corresponding SW player.

• Off

Turns off the 3D mode. If you see a discrete or overlapping image while wearing DLP

3D glasses, you may need to execute "Invert" to get best match of left/right image sequence to get the correct image (for DLP 3D).

Choose "On" to display the 3D warning message.

3D Warning Message

Page 35

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode.

Note: "Sharpness" function is not supported under computer mode.

Note: Supported 3D signal timings:

Signal source type Supported timing

Video/S-Video/Component video NTSC, PAL

VGA 640 x 480@100Hz, 640 x 480@120Hz,

DVI

HDMI (PC)

HDMI (Video) NTSC, PAL

While using NVIDIA 3D Vision, please download and install the latest NVIDIA 3D Vision driver from NVIDIA web site for your graphics card to support this projector.

It needs correct settings on graphics card 3D application program for correct 3D display.

The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these players on the web page below.

- NVIDIA Stereoscopic 3D Video Player: http://www.nvidia.com/object/ 3D_Drivers_Downloads.html

- Stereoscopic Player (Trial): http://www.3dtv.at/Downloads/Index_en.aspx

- DDD TriDef Media Player (Trial): http://www.tridef.com/download/TriDef3-D-Experience-4.0.2.html

Note: "3D Sync Invert" is only available when 3D is enabled.

800 x 600@100Hz, 800 x 600@120Hz, 1024 x 768@100Hz, 1024 x 768@120Hz

Page 36

English

(X1111)

(X1111A/X1211/X1211S/X1211K/ X1213P/X1311KW/X1313PW)

(X1111H/X1211H/X1213PH/ X1313PWH)

Setting

Menu Location

HDMI Color Range (X1111H/ X1211H/ X1213PH/ X1313PWH only)

HDMI Scan Info (X1111H/ X1211H/ X1213PH/ X1313PWH only)

Chooses the OSD menu location on the display screen. Adjusts the color range of the HDMI image data to prevent

color display error.

• Auto: Automatically adjusts the color range by

information from the player.

• Limited Range: Processes the input image as limited color

range data.

• Full Range: Processes the input image as full color range

data.

Adjusts the overscan ratio of the HDMI image on screen.

• Auto: Automatically adjusts the overscan ratio by

information from the player.

• Underscan: Always no overscan on the HDMI image.

• Overscan: Always keep overscan on the HDMI image.

Page 37

English

Closed Caption

Security

Selects a preferred closed captioning mode from CC1, CC2, CC3, CC4, (CC1 displays captions in the primary language in your area). Select "Off" to turn off the captioning feature. This function is only available when a composite video or SVideo input signal is selected and its system format is NTSC.

Security This projector provides a useful security function for the administrator to manage the projector.

Press to change the "Security" setting. If the security

function is enabled, your must enter "Administrator Password" first before changing the security setting.

The factory default of "Administrator Password" is "1234".

• Select "On" to enable the security function. You have to

enter password depending on the "Security Mode". Please refer to "User Password" section for details.

• If "Off" is selected, you can switch on the projector

without password.

Timeout (Min.) Once "Security" is set to "On", you can set timeout function.

• Press to select timeout duration.

• The range is from 10 to 990 minutes.

• When time is up, the projector will request you to enter

the password again.

• The factory default setting of "Timeout (Min.)" is "Off".

• Once the security function is enabled, the projector will

request you to enter password when switching on the projector. Both "User Password" and "Administrator Password" can be accepted for this dialogue.

Page 38

English

VGA OUT (Standby) (X1111H/ X1111A/X1211/ X1211H/X1211S/ X1211K/X1213P/ X1213PH/ X1311KW/ X1313PW/ X1313PWH)

Reset

User Password

• Press to set up or change "User Password".

• Use the numerical keys on the remote control to set the

password and press "MENU" to confirm.

• To delete the digits, Press .

• Enter the password again when you see "Confirm

Password" displayed.

• The password should be 4~8 digits in length.

• If you select "Request password only after plugging

power cord", you are requested to input the password every time the power cord is plugged.

• If you select "Always request password while projector

turns on", you are requested to input the password every time the projector is turned on.

Administrator Password You can enter "Administrator Password" when the "Enter Administrator Password" or "Enter Password" dialogue box displays.

• Press to change "Administrator Password".

• The factory default of "Administrator Password" is

"1234". If you forget your administrator password, do the following to retrieve the administrator password:

• Enter the unique 6-digit "Universal Password" which is

printed on the Security Card that came with your

projector. This unique password will be accepted by the

projector no matter what the administrator password is.

• If the Security Card is lost, please contact your local Acer

service center. Selecting "On" enables the function. The projector can output

a VGA signal when it is in standby mode and the VGA IN (or VGA IN 1) and VGA OUT sockets are correctly connected to the devices.

Enabling this function slightly increases the standby power consumption.

Press after choosing "Yes" to return the display

parameters on all menus to the factory default settings.

Page 39

English

Management

ECO Mode

High Altitude

Choose "On" to dim the projector lamp, which will also lower the power consumption, reduce noise, and extend the lamp life. Choose "Off" to return to the normal mode.

Choose "On" to turn on the High Altitude mode. When this function is turned on, the projector fans operate at full speed continuously to cool down the projector’s temperature.

• Instant Off: Enables you to turn off the projector

immediately without fan cooling process by pressing

Turn Off Mode

the power button twice.

• Instant Resume: Enables you to restart the projector

immediately within 2 minutes after turning it off.

Auto Shutdown (Minutes)

Lamp Hour Elapse Displays the lamp’s elapsed operating time (in hours).

Lamp Reminding

Lamp Hour Reset

The projector will automatically shut down while there is no signal input detected after the setting time.

Choose this function to show or hide warning message when the changing lamp message is displayed. The message will show up 30 hours before end of life.

Press after choosing "Yes" to turn the lamp hour

counter to 0 hours.

Page 40

English

(X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH only)

(X1111)

(X1111H/X1111A/X1211/X1211H/ X1211S/X1211K/X1213P/X1213PH/ X1311KW/X1313PW/X1313PWH)

Audio

Volume

Mute

Timer

Timer Location Sets the location of the timer on the screen. Timer Start (or

Stop) Timer Period

(Minutes)

• Press to decrease the volume.

• Press to increase the volume.

• Choose "On" to turn mute on.

• Choose "Off" to turn mute off.

Press to start or stop the timer.

Press to adjust the timer period.

Page 41

English

Timer Volume (X1111H/X1111A/ X1211/X1211H/ X1211S/X1211K/ X1213P/X1213PH/ X1311KW/ X1313PW/ X1313PWH)

Timer Display

Language

Select this function to adjust the notification volume when the timer function is enabled and time is up.

Press to choose a timer display mode.

Sets a language for the OSD menus. Use to select your preferred language.

• Press to confirm the selection.

Page 42

English

Appendices

Troubleshooting

If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center.

Image Problems and Solutions

# Problem Solution

1 No image appears

onscreen

2 Partial, scrolling

or incorrectly displayed image (For PC (Windows 95/98/2000/XP/ Win7/Vista))

• Make sure all the cables are correctly connected as

described in the "Getting Started" section.

• Ensure none of the connector pins are bent or

broken.

• Check if the projection lamp has been securely

installed. Please refer to the "Replacing the Lamp" section.

• Make sure you have removed the lens cap and the

projector is switched on.

• Press "RESYNC" on the control panel or remote

control.

• For an incorrectly displayed image:

• Open "My Computer > Control Panel," and

then double-click the "Display" icon.

• Select the "Settings" tab.

• Verify that your display resolution setting is

lower than or equal to 1600 x 1200, 1920 x

1080.

• Click the "Advanced Properties" button.

If the problem still appears, change the monitor display you are using and follow the steps below:

• Verify that the resolution setting is lower than

or equal to 1600 x 1200, 1920 x 1080.

• Click the "Change" button under the

"Monitor" tab.

• Click "Show all devices > Standard monitor

types" under the SP box, and choose the resolution mode you need under the "Models" box.

• Verify that the resolution setting of the

monitor display is lower than or equal to 1600 x 1200, 1920 x 1080.

Page 43

English

3 Partial, scrolling

or incorrectly displayed image (For notebooks)

4 The screen of the

notebook computer is not displaying your presentation

5 Image is unstable

or flickering

6 Image has vertical

flickering bar

• Press "RESYNC" on the control panel or remote

control.

• For an incorrectly displayed image:

• Follow the steps for item 2 (above) to adjust

the resolution of your computer.

• Press the toggle output settings. Example:

[Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]

• If you experience difficulty changing resolutions or

your monitor freezes, restart all equipment including the projector.

• If you are using a Microsoft

notebook: Some notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer's manual for detailed information.

• If you are using an Apple

notebook: In System Preferences, open Display and select Video Mirroring "On."

Windows® based

Mac® OS based

• Use "Tracking" to correct it. Refer to the "Image"

section for more information.

• Change the display color setting on your computer.

• Use "Frequency" to make an adjustment. Refer to

the "Image" section for more information.

• Check and reconfigure the display mode of your

graphics card to make it compatible with the projector.

7 Image is out of

focus

• Make sure the lens cap is removed.

• Adjusts the focus ring on the projector lens.

• Make sure the projection screen is within the

required distance: X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH: 4.9 to 37 feet (1.5 to 11.3 meters) X1311KW/X1313PW/X1313PWH: 4.3 to 32 feet (1.3

to 9.7 meters) X1211S: 3 to 18 feet (0.9 to 5.5 meters) Refer to the "How to Get a Preferred Image Size by

Adjusting Distance and Zoom" section for more information.

Page 44

English

8 Image is stretched

when displaying a "widescreen" DVD title

When you play a DVD encoded in anamorphic or 16:9 aspect ratio you may need to adjust the following settings:

• If you play a 4:3 format DVD title, please change the

format to 4:3 with the projector OSD.

• If the image is still stretched, you will also need to

adjust the aspect ratio. Set up the display format to 16:9 (wide) aspect ratio on your DVD player.

9 Image is too small

or too large

• Adjust the zoom lever on the top of the projector.

• Move the projector closer to or further from the

screen.

• Press "MENU" on the control panel or remote

control. Go to "Image" > "Aspect Ratio" and try different settings.

10 Image has slanted

sides

• If possible, reposition the projector so that it is

centered on the screen and below the bottom of the screen.

• Press the Keystone correction keys on the control

panel or remote control until the image becomes square.

• Press "MENU" on the control panel or remote

control to open the OSD menu. Go to "Image" > "Auto Keystone" or "Image" > "Manual Keystone" to make adjustments.

11 Image is reversed

• Select "Image" > "Projection Mode", "Image" >

"Projection Location" on the OSD and adjust the projection direction.

Problems with the Projector

# Condition Solution

1 The projector stops responding

to all controls

2 Lamp burns out or makes a

popping sound

If possible, turn off the projector, then unplug the power cord and wait at least 30 seconds before reconnecting power.

When the lamp reaches the end of its useful life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on until the lamp module has been replaced. To replace the lamp, follow the procedures in the "Replacing the Lamp" section.

Page 45

English

OSD Messages

Fan Fail.

Lamp will automatically turn off soon.

Projector Overheated.

Lamp will automatically turn off soon.

Lamp is approaching the end of its useful life in full power operation.

Replacement suggested!

# Condition Message Reminder

1 Message Fan Fail - the system fan is not working.

Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. If the dust filter is clogged with dust, please clean it.

Replace the lamp - the lamp is about to reach its maximum lifetime. Prepare to replace it soon.

Page 46

English

LED & Alarm Definition Listing

LED Messages

Message Power LED LAMP LED TEMP LED

Red Blue Red Red

Standby (Power cord plugged in)

Power on -- V -- --

Lamp retry -- Quick

Turning off (Cooling state)

Turning off (Cooling completed)

Error (Thermal failure) -- V -- V

Error (Fan lock failure) -- V -- Quick

Error (Lamp breakdown) -- V V --

Error (Color wheel failure)

V-- -- --

flashing

Quick

flashing

V-- -- --

-- V Quick

-- -- --

-- --

flashing

Page 47

English

Replacing the Lamp

Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.

The projector will detect the lamp life itself. It will show you a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!" When you see this message, change the lamp as soon as possible. Make sure the projector has been cooled down for at least 45 minutes before changing the lamp.

Warning: Lamp compartment is hot! Allow it to cool down before changing lamp!

To remove the lamp:

1 Turn the projector off by pressing (POWER).

2 Allow the projector at least 45 minutes to cool down.

3 Disconnect the power cord.

4 Use a screwdriver to remove the screws from the cover. (Illustration #1)

5 Push up and remove the cover.

6 Remove and dispose of the lamp protection film (Illustration #2).

7 Remove the screw that secures the lamp module (Illustration #3).

8 Lift the handle so that it stands up. Pull out the lamp module by force

(Illustration #4).

To replace the lamp module, use a new lamp and follow illustrations # - # .

Warning: To reduce the risk of personal injury, do not drop the lamp module or touch the lamp bulb. The bulb may shatter and cause injury if it is dropped.

Page 48

English

8.4

130 mm

49.9

Short Rod

Screw Type A

50 mm length / 8 mm diameter -

Ceiling Mount Base

- Attach to ceiling

Long Rod

Extension Rod

Allen Key

- For tighten/loosen

Tightening Screw

Medium Rod

Large Cylinder Cap

Ceiling Mount Installation

If you wish to install the projector using a ceiling mount, please refer to the steps below:

1 Drill four holes into a solid, structurally sound part of the ceiling, and

secure the mount base.

Note: Screws are not included. Please obtain the appropriate screws for your type of ceiling.

2 Secure the ceiling rod using the appropriate type of cylinder screws.

Page 49

English

3 Use the appropriate number of screws for the projector size to attach the

Smaller Washer

Large Washer

Projector Bracket Supports projector and allows for adjustments

Screw Type B

Spacer

- For heat dissipation

Screw Type A 50 mm length /8 mm diameter

Large Cylinder Cap

Allen Key

- For tighten/loosen

Tightening Screw

projector to the ceiling mount bracket.

Note: It is recommended that you keep a reasonable space between the bracket and the projector to allow for proper heat distribution. Use two washers for extra support, if deemed necessary.

4 Attach the ceiling bracket to the ceiling rod.

Page 50

English

Allen Key

Tightening Screw

Allen Key

Tightening Screw

116.3 mm

137 mm

80 mm

23 mm

5 Adjust the angle and positioning as necessary.

Note: The appropriate type of screw and washer for each model is listed in the table below. 3 mm diameter screws are enclosed in the screw pack.

Models Screw Type B Washer Type

X1111/X1111H/X1111A/ X1211/X1211H/X1211S/ X1211K/X1213P/ X1213PH/X1311KW/ X1313PW/X1313PWH

Diameter (mm) Length (mm) Large Small

325VV

Page 51

English

Specifications

The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation.

Projection system

Resolution

™

DLP

• X1111/X1111H/X1111A:

Native: SVGA (800 x 600) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)

• X1211/X1211H/X1211S/X1211K/X1213P/

X1213PH: Native: XGA (1024 x 768) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)

• X1311KW/X1313PW/X1313PWH:

Native: WXGA (1280 x 800) Maximum: UXGA (1600 x 1200), 1080p (1920 x 1080)

Computer compatibility Refer to the "Compatibility Modes" section for more

Video compatibility NTSC (3.58/4.43), PAL (B/D/G/H/I/M/N), SECAM (B/D/G/

Aspect ratio

information.

K/K1/L), HDTV (720p, 1080i, 1080p), EDTV (480p, 576p), SDTV (480i, 576i)

• X1111/X1111J/X1111A/X1211/X1211H/X1211S/

X1211K/X1213P/X1213PH: 4:3 (native), 16:9

• X1311KW/X1313PW/X1313PWH:

4:3, 16:9, Full, Letter Box

Displayable colors 1.07 billion colors

Projection lens

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH: F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm, 1:1.1 Manual Zoom and Manual Focus

• X1211S:

F = 2.6 - 2.78, f = 10.20 mm - 12.24 mm, 1:1.2 Manual Zoom and Manual Focus

• X1311KW/X1313PW/X1313PWH:

F = 2.56 - 2.8, f = 21.00 mm - 23.00 mm, 1:1.1 Manual Zoom and Manual Focus

Projection screen size (diagonal)

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH: 35" (89 cm) - 159" (404 cm)

• X1211S:

32" (81 cm) - 195" (495 cm)

• X1311KW/X1313PW/X1313PWH:

42" (107 cm) - 186" (472 cm)

Page 52

English

Projection distance

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH:

4.9' (1.5 m) - 37' (11.3 m)

• X1211S:

3' (0.9 m) - 18' (5.5 m)

• X1311KW/X1313PW/X1313PWH:

4.3' (1.3 m) - 32' (9.7 m)

Throw ratio

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH: 53" @ 2 m (1.86 - 2.04 : 1)

• X1211S: 55" @ 1 m (0.9 - 1.08 : 1)

• X1311KW/X1313PW/X1313PWH: 63" @ 2 m (1.5 -

1.65 : 1)

Horizontal scan rate 31 - 99 kHz

Vertical refresh scan rate 48 - 120 Hz

Keystone correction

• X1111:

+/-40 Degrees (Vertical), Manual

• X1111H/X1111A/X1211/X1211H/X1211S/X1211K/

X1213P/X1213PH/X1311KW/X1313PW/ X1313PWH:

+/-40 Degrees (Vertical), Manual & Auto

Digital zoom 2 X

Audio

• X1111: N/A

• X1111A/X1211/X1211S/X1213P/X1213PH/

X1311KW/X1313PW/X1313PWH: 2W x 1

• X1111H/X1211H: 10W x 1

Weight

• X1111/X1111H/X1111A/X1211/X1211H/X1211K/

X1213P/X1213PH/X1311KW/X1313PW/ X1313PWH: Approximate 2.6 kg (5.73 lbs.)

• X1211S: Approximate 2.7 kg (5.95 lbs.)

Dimensions (W x D x H) 280 x 230 x 84 mm (11.0" x 9.1" x 3.3")

Power supply Universal AC input 100 - 240 V, input frequency 50/60

Power consumption (typical)

• X1111/X1111H/X1111A/X1211/X1211H/X1211S/

X1311KW: 287 W

• X1211K: 291 W

• X1213P/X1213PH/X1313PW/X1313PWH: 348 W

Operating temperature 0ºC to 35ºC / 32ºF to 95ºF

Page 53

English

I/O connectors

Standard package contents

Accessory (optional)

• Power socket x 1

• RS232 x 1

• VGA input x 1

• Composite video x 1

• S-Video x 1

Below items are for X1111A/X1211/X1213P/ X1211S/X1211K/X1311KW/X1313PW only.

3.5 mm audio jack input x 1

•

• 3.5 mm audio jack output x 1

• VGA input x 2

• VGA output x 1

• USB x 1 (Type mini B)

Below items are for X1111H/X1211H/X1213PH/ X1313PWH only.

HDMI 1.3 input x 1

•

• AC power cord x 1

• VGA cable x 1

• Remote control x 1

• Battery x 2 (for the remote control)

• User's guide (CD-ROM) x 1

• Quick start guide x 1

• Security card x 1

• Composite video cable x 1

• Carrying case x 1

• Dust filter x 1

* Design and specifications are subject to change without notice.

Page 54

English

Compatibility Modes

1 VGA Analog - PC Signal

Mode Resolution V.Frequency [Hz]

60 31.47

72 37.86

VGA 640 x 480

SVGA 800 x 600

XGA 1024 x 768

1152 x 864

SXGA

1280 x 1024

QuadVGA

SXGA+ 1400 x 1050 60 65.32

UXGA 1600 x 1200 60 75.00

PowerBook G4

1280 x 960 60 60.00

1280 x 960 75 75.00

640 x 480 60 31.50

640 x 480 66.6 (67) 35.00

800 x 600 60 37.88

1024 x 768 60 48.36

1152 x 870 75 68.68

1280 x 960 75 75.20

75 37.50

85 43.27

120 61.91

56 35.20

60 37.88

72 48.08

75 46.88

85 53.67

120 77.42

60 48.36

70 56.48

75 60.02

85 68.67

120 98.96

70 63.80

75 67.50

85 77.10

60 63.98

72 76.97

75 79.98

85 91.15

H.Frequency

[KHz]

Page 55

English

i Mac DV(G3) 1024 x 768 75 60.30

1280 x 768 60 47.78

1280 x 768 75 60.29

1280 x 768 85 68.63

1280 x 720 60 44.80

1280 x 800 60 49.60

WXGA

1440 x 900 60 55.90

1680 x 1050 60 65.30

1366 x 768 60 47.71

1920 x 1080-RB 60 66.60

1920 x 1080-EIA 60 66.60

1024 x 600 60 37.30

2 HDMI - PC Signal (For X1111H/X1211H/X1213PH/X1313PWH)

Mode Resolution V.Frequency [Hz]

60 31.47

72 37.86

640 x 480

VGA

720 x 400

SVGA 800 x 600

XGA 1024 x 768

75 37.50

85 43.27

120 61.91

70 31.47

85 37.93

56 35.20

60 37.88

72 48.08

75 46.88

85 53.67

120 77.43

60 48.36

70 56.48

75 60.02

85 68.67

120 98.96

H.Frequency

[KHz]

Page 56

English

70 63.80

1152 x 864

SXGA

1280 x 1024

QuadVGA

SXGA+ 1400 x 1050 60 65.32

UXGA 1600 x 1200 60 75.00

PowerBook G4

i Mac DV(G3) 1024 x 768 75 60.30

WXGA

1280 x 960 60 60.00

1280 x 960 75 75.00

640 x 480 60 31.50

640 x 480 66.6 (67) 35.00

800 x 600 60 37.88

832 x 624 75 49.72

1024 x 768 60 48.36

1152 x 870 75 68.68

1280 x 960 75 75.20

1280 x 768 60 47.78

1280 x 768 75 60.29

1280 x 768 85 68.63

1280 x 720 60 44.80

1280 x 800 60 49.60

1440 x 900 60 55.90

1680 x 1050 60 65.30

1366 x 768 60 47.71

1920 x 1080-RB 60 66.60

1920 x 1080-EIA 60 66.60

1024 x 600 60 37.30

75 67.50

85 77.10

60 63.98

72 76.97

75 79.98

85 91.15

3 HDMI - Video Signal (For X1111H/X1211H/X1213PH/X1313PWH)

Mode Resolution V.Frequency [Hz] H.Frequency [KHz]

480i

480p 720 x 480 59.94 31.47

576i

576p 720 x 576 50 31.25 720p 1280 x 720 60 45.00

720 x 480

(1440 x 480)

720 x 576

(1440 x 576)

59.94 (29.97) 27.00

50 (25) 27.00

Page 57

English

720p 1280 x 720 50 37.50 1080i 1920 x 1080 60 (30) 33.75 1080i 1920 x 1080 50 (25) 33.75

1080p 1920 x 1080 60 67.50 1080p 1920 x 1080 50 56.26 1080p 1920 x 1080 24 27.00 1080p 1920 x 1080 23.98 26.97

4 YPbPr Signal

Mode Resolution V.Frequency [Hz] H.Frequency [KHz]

480i

480p

576i 576p 720p 720p

1080i

1080i 1080p 1080p 1080p 1080p

720 x 480 720 x 480 720 x 576

720 x 576 1280 x 720 1280 x 720

1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080 1920 x 1080

59.94 15.73

59.94 31.47

50.00 15.63

50.00 31.25

60.00 45.00

50.00 37.50

60.00 33.75

50.00 28.13

60.00 67.5

50.00 56.26

24.00 27.00

23.98 26.97

5 Video, S-Video Signal

Mode V.Frequency [Hz] H.Frequency [KHz] fsc (MHz)

NTSC 15.73 60

PAL 15.63 50

SECAM 15.63 50

PAL-M 15.73 60

PAL-N 15.63 50

PAL-60 15.73 60

NTSC4.43 15.73 60

3.58

4.43

4.25 or 4.41

3.58

4.43

Page 58

English

Regulations and safety notices

FCC notice

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits may be attached to this equipment. Operation with non-certified peripherals is likely to result in interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user's authority, which is granted by the Federal Communications Commission, to operate this device.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.

Page 59

English

Remarque à l'intention des utilisateurs canadiens

Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada.

Declaration of Conformity for EU countries

Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.

Compliant with Russian regulatory certification

Radio device regulatory notice

Note: The regulatory information below is for models with wireless LAN and/or Bluetooth only.

General

This product complies with the radio frequency and safety standards of any country or region in which it has been approved for wireless use. Depending on configurations, this product may or may not contain wireless radio devices (such as wireless LAN and/or Bluetooth modules).

English

Canada — Low-power license-exempt radio communication devices (RSS-210)

a Common information

Operation is subject to the following two conditions:

1. This device may not cause interference, and

2. This device must accept any interference, including interference that may cause undesired operation of the device.

b Operation in 2.4 GHz band

To prevent radio interference to the licensed service, this device is intended to be operated indoors and installation outdoors is subject to licensing.

Page 60

English

List of applicable countries

This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.

Page 61

English

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

Acer Incorporated

Taipei Hsien 221, Taiwan

Declaration of Conformity

We,

Acer Incorporated

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih, Taipei Hsien 221, Taiwan Contact Person: Mr. Easy Lai, e-mail:easy_lai@acer.com.tw

And,

Acer Italy s.r.l

Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913, www.acer.it

Hereby declare that:

Product: Projector Trade Name: Acer Model Number: QSV1032/QSV1035/QSV1033/QNX1030/QNX1034/QNX1031/

Machine Type: X1111/X1111H/X1111A/X1211/X1211H/X1211S/X1211K/X1213P/

Is compliant with the essential requirements and other relevant provisions of the following EC directives, and that all the necessary steps have been taken and ar e in force to assu re that pr oduction units of the same product will continue comply with the requirements.

EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:

-. EN55022, AS/NZS CISPR22, Class B

-. EN55024

-. EN61000-3-2 Class A

-. EN61000-3-3

Low Voltage Directive 2006/95/EC as attested by conformity with the following harmonized standard:

-. EN60950-1

QNX1038/QNX1028/QNX1036/QWX1037/QWX1029/QWX1036 series

X1213PH/X1311KW/X1313PW/X1313PWH series

English

RoHS Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment

-. The maximum concentration values of the restricted substances by weight in homogenous material are:

Lead 0.1% Polybrominated Biphenyls (PBB’s) 0.1% Mercury 0.1% Polybrominated Diphenyl Ethers (PBDE’s) 0.1% Hexavalent Chromium 0.1% Cadmium 0.01%

Directive 2009/125/EC with regard to establishing a framework for the setting of ecodesign requirements for energy-related product.

Page 62

English

8F, 88, Sec. 1, Hsin Tai Wu Rd., Hsichih

The standards listed below are applied to the product if built with WLAN module or wireless keyboard and mouse.

R&TTE Directive 1999/5/EC as attested by conformity with the following harmonized standard:

• Article 3.1(a) Health and Safety

-. EN60950-1

-. EN62311

• Article 3.1(b) EMC

-. EN301 489-1

-. EN301 489-17

• Article 3.2 Spectrum Usages

-. EN300 328

-. EN301 893 (Applicable to 5GHz high performance RLAN).

Year to begin affixing CE marking 2010.

Acer Incorporated

Taipei Hsien 221, Taiwan

Easy Lai /Manager Date Regulation Center, Acer Inc.

June. 11, 2011 -

Page 63

English

Product: DLP Projector

Model Number: QSV1032/QSV1035/QSV1033/

QNX1030/QNX1034/QNX1031/ QNX1038/QNX1028/QNX1036/ QWX1037/QWX1029/QWX1036 series

Machine Type: X1111/X1111H/X1111A /X1211/

X1211H/X1211S/X1211K/X1213P/ X1213PH/X1311KW/X1313PW/ X1313PWH series

Name of Responsible Party: Acer America Corporation

Address of Responsible Party: 333 West San Carlos St.

San Jose, CA 95110 U. S. A.

Contact Person: Acer Representative

Phone No.: 254-298-4000

Fax No.: 254-298-4147

Federal Communications Commission

Declaration of Conformity

The following local Manufacturer / Importer is responsible for this declaration:

Acer America Corporation

333 West San Carlos St., San Jose

CA 95110, U. S. A.

Tel: 254-298-4000

Fax: 254-298-4147

www.acer.com

English

Acer X1111 User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Acer Projector

Information for Your Safety and Comfort

First Thing First

Usage Notes

Precautions

Contents

Introduction

Product Features

Package Overview

Projector Overview

Getting Started

Connecting the Projector

Turning the Projector On/Off

Adjusting the Projected Image

User Controls

Installation Menu

Acer Empowering Technology

Onscreen Display (OSD) Menus

Color

Image

Setting

Management

Audio

Timer

Language

Appendices

Troubleshooting

LED & Alarm Definition Listing

Replacing the Lamp

Ceiling Mount Installation

Specifications

Compatibility Modes

Regulations and safety notices