ABB S800U Accessories Catalog

Accessories
S800U
S800-SOR
S800-UVR
Shunt trip
For remote tripping of breaker, a shunt trip device can be added to the MCB. The device opens the breaker after control voltage is applied.
Description (for field mounting, left side) Catalog number
Shunt operation release 24 VAC/DC S800-SOR24
Shunt operation release 48...130 VAC/DC S800-SOR130
Shunt operation release 110...250 VAC/DC S800-SOR250
Undervoltage release
When control voltage drops below approximately 50 percent of rated voltage, the UVR opens the breaker. The breaker cannot be operated unless proper control voltage is first applied to the UVR coil.
Description Catalog number
Undervoltage release 24...36 VAC/DC S800-UVR36
Undervoltage release 48...60 VAC/DC S800-UVR60
Undervoltage release 110...130 VAC/DC S800-UVR130
Undervoltage release 220...250 VAC/DC S800-UVR250
S800-AUX
S800-AUX/ALT
Auxiliary contacts
The auxiliary contacts will signal whether the breaker is in the ON or OFF position.
Description Catalog number
Auxiliary contact S800-AUX
Bell alarm
The bell alarm includes a set of contacts that will only signal when the breaker has tripped. Typically, the contacts would be connected to an alarm or bell to signal the operator that an overcurrent trip has occurred. The bell alarm also includes a test button for testing the alarm contacts without opening the breaker.
Description Catalog number
Bell alarm S800-AUX/ALT
Ring tongue adaptor
Description Catalog number
S800-RT2125
60 Miniature Circuit Breakers | US Catalog
Accessories
S800U
S800-RD
Rotary operating mechanism
Allows “through the door” operation.
Description Catalog number
Handle mechanism S800-RD
Description Catalog number
Gray rotary handle S800-RHE-H
Description Catalog number
Red rotary handle S800-RHE-EM
UL locking device
Description Catalog number
Shaft extension S800-RHE-S
S800-RHE-H
S800-RHE-EM
S800-RHE-S
Description Catalog number
Padlock not included S800U-PLL
S800U-PLL
US Catalog | Miniature Circuit Breakers 61
Loading...