AASTRA DT4x2 Reference Guide

QUICK REFERENCE GUIDE DT412/ DT422/ DT432 ATEX MD EVOLUTION

DT412/DT422/DT432ATEX

Cordless Telephone for the MD Evolution Communication System

Quick Reference Guide

This Quick reference Guide describes the available operations with MD Evolution system and programming procedures in a user-friendly way.

Switching On/Off

Switch on: æ (until display on)

Switch off: Press and hold programmed Hot key or confirm

Answer calls

Answer: æ Handsfree: ss middle soft key Pre

Call pick-up: 13 No o ging extension + æ Group call pick-up: 14

General ringing call pick-up: 15

End call: æ

Make calls

From on hook: Ext. No. or External access code and No+ æ From Off hook: æ Ext.No. or External access code and No. Handsfree: Dial No.+ æ and press middle soft key.

Abbreviated number: Dial abbreviated number + æ

Dial a number via Hot/Soft key: Press and hold preset Hot key Or press preset Soft key

Make a call via the phone book: Find + Enter first letter of name + OK +

â or ã (until name is displayed)+ æ

Dial number from the call list:

Redial the last external number:

Yes (within 2 seconds)

with Yes/No.

f rin

ã (until number is displayed) + æ

11 + æ

On hold

Ongoing conversation: R

Refer back

Switch between the calls: R + 2 Terminate the ongoing call and connect to the other: R + 1

Transfer

Ongoing conversation: R + 3rd party number+ æ (before or after answer)

Conference

Ongoing conversation: R + 3rd party number + 3

(after answer)

Intrusion

Activate: 3 on busy called party

Waiting call

æ to end ongoing call + æ to answer waiting call.

Handsfree

Toggle on/off during ongoing conversation: Press middle soft key

. To control volume, use the 2 keys on the left side on the

terminal. To mute, use the Mute key (right side of the terminal)

Retrie g from the hunt group vin

Activate: 68 Cancel: 68

Appointment reminder

Activate 71 + digits HHMM (Hours/Minutes) : 4 Cancel: 71 + 9

Call forwarding from your own extension

Immediate call forwar : 61 + Extension No + æ ding Call Fwd when no an : 62 + E sion + æ xten Call Fwd w : 63 + Extensi N° + æ Call Fwd when n r or busy: 69 + Extension No + æ Do not disturb: 64 + æ

Follow me

From the extension in use: 65 + your own extension No + æ +

password

Call fo arding from a third party rw

Activate: 65+ * + your own extension No + * + receiving extension

No + æ + password

Cancel call forwarding (except follow-me and third party call for ard) w

From your own extension: 60 + æ

swer No

hen busy

no a swe

Cancel follow me and third party call

warding for

66 + your own extension No + æ + password

Phone lock

Activate 78 : Cancel: 78 + password

Change the password:

79 + old password+ new password

Lock the keypad

• Automatic mode (the keypad is automatically locked after 20 seconds of no use): select Auto Key Lock (refer Menu configuration/Settings/General) + Change. The function is switched on/off.

• Manual mode: ç + * to lock/unlock the keypad.

Lock/unlock the phone

You can protect your Cordless from being used by others by locking it automatically when placed in a charger or switched off. The Cordless can only be unlocked with a four-digit code. The code is defined in the SIM card and cannot be changed from the terminal. When the Cordless is locked, it is still possible to send all types of alarms.

Voice mail

Call your mailbox from your extension (internal access): Voicemail number + æ + password. We recommend to program

this voicemail number on the Message key. Default number: 884.

Read SMS messages

ã to access the list of messages +

ã or â for selection of the wanted message+ á to read the selected message

Delete + Yes to delete the message

Send SMS messages

First, one of the Soft key/ Hot key has to be pre-defined as SMS key (refer program a function). To send a message: Press the dedicated SMS soft key/ hot key on idle terminal + dial the required telephone number or press the repertory soft key and select the wanted number + OK + enter the text of the message (if required) + Send

Program a Soft key / Hot key (key 0-9)

Each key can be programmed either with an internal/ prefix + external number, or a function/service. Start in the menu Settings (refer Menu configuration).

Progra

m a number:

ã á r selecting Hot key or Soft key

fo +

ã or â for selecting the relevant key+ á +

Edit for display of the name + Enter the name +Save+ ã +

Change + ã for selecting Phone Call + Select +

Enter the telephone number + Save

For an external number, enter first the external access code (for instance, 0). The characters * and # are possible. A long hit on * programs the activation/de-activation of sending tones. A long hit on # programs a pause.

Progra

m a function:

ã á r selection of Hot key or Soft y +

fo ke

ã or â for selection of relevant key+ á +

Edit to display the name + Enter the n e ( S for instance)+ Save + ã am SM Change + ã or â for selection of the wanted function + Select + Enter required data according to function + Save

Data according to function:

• Send data: enter data if pre-defined or empty if dialled data after pressing the function key

• Data with prefix: enter the prefix

• Short cut: associate the short-cut

• SMS: When SMS address is shown you can leave it blank, or

you can predefine a destination address. You can also predefine the SMS text.

• Modify modes: mark the activated mode It is recommended to program the key Switch On/Off.

Alarms (DT422 only)

When you are in trouble, press the red button and a preset message is sent to the alarm central. The alarm function can be restricted or not available.

Alarm with data.

Additional data for example a location code, can be sent along with an alarm To use the function, one Soft/Hot key must be defined as a short cut to the menu Edit alarm data, see section “Hot keys and Soft keys”. The stored data is added to all types of alarm at transmission.

Automatic call after an alarm

One Hot key must be programmed with the specific telephone external/internal number, see section “Hot keys and Soft keys”. The terminal calls automatically this number after all types of alarm. The receiver can listen to the caller that has his speech monitoring discreetly activated.

Personal alarm

Press the red Alarm key twice within 2 seconds. The display shows Personal Alarm. An alarm is sent to the alarm central. After that, the Cordless returns to idle mode. You can always trigger the

alarm, even when you are speaking, editing your settings or while the Cordless is locked. Press key C to cancel the personal alarm.

No-movement alarm and man down alarm

The No-movement alarm will go off when you have not moved within a preset time (default 30 seconds). The Man down alarm will go off when the Cordless is tilted more

than 45º for a preset time (default 30 seconds). Before an alarm is activated a warning signal sounds. If you do not cancel the alarm by pressing a key, it is sent and a sensor inside the Cordless will alert the preprogrammed number. Press and hold the preprogrammed Soft/Hot key, to put the alarm in operation respectively out of operation When the No-movement alarm has been sent, it is made active

again by moving the Cordless or pressing a key. When the Man down alarm has been sent, it is made active again by moving the Cordless to upright position or pressing a key.

Programmation

Select the option Alarm settings (see menu configuration) and select No movement or Man-down. Activate/ cancel with Change.

Declaration of Conformity

Hereby, Aastra Telecom Sweden AB, SE-126 37 Hägersten, declares that this telephone is in conformity with the essential requirements and other relevant provisions of the R&TTE directive 1999/5/EC.

Details to be found at: http://www.aastra.com/sdoc

For questions regarding the product, please contact your Aastra Certified Sales Partner. Also visit us on: www.aastra.com

EN/LZTBS 102 1943 R4A

QUICK REFERENCE GUIDE DT412/ DT422/ DT432 ATEX MD EVOLUTION

Description of DT412/ DT422/DT432ATEX

1 LED

A flashing LED indicates an incoming call or a message waiting.

2 Volume Up/Down

Off hook: raise/lower speaker volume. The key to increase volume can be use to answer calls (handsfree mode).

3 Display

The display can for example show the battery, time, system, owner ID/name, extension number and the Soft key information. It is possible to change the text size in the display.

4 Soft keys

The functions depend on the traffic state and will be shown on the last line of the display. When you are requested to (see display), press the required key to access the function. Used for different choices in the menu structure (menu mode). In idle mode the functions of the Soft keys can be changed by you. The middle Soft key is also used to turn Loudspeaking on or off.

5 Call key

Switch on. Make call, answer call, end call.

6 Navigation key

Controls the movement of the cursor in the display. In idle mode, the Navigation key (down) is used for entering the call list, the Navigation key (up) for entering the message list, and pressing Navigation key (left) will show the current date in the display window. When navigating the menu structure the key is used for moving up, down, back (left), or next (right).

7 Menu key

Enter/Exit the menu mode, see sections “Display info” and “Menu

structure”. Also used to manually lock/ unlock the keypad, see

section “Lock the keypad”.

8 Keypad

Enter numbers and writing texts, see section “Write Text”. Keys 0- 9 can be programmed as Hot keys, see section “Hot keys and Soft

keys”.

9 Microphone 10 Mute key

Turn off/on audible signals in idle mode, silencing the ring signal at an incoming call, and also to turn the microphone on/off during a call.

11 Alarm key (DT422 only)

Sending alarms and testing the Alarm function.

12 Loudspeakers

One loudspeaker for ring signal and one for Loudspeaking.

Please note: The phone may retain small magnetic articles around the earpiece region.

13 Charging connector

Used when the terminal is in the desktop charger. A beep signals the connection. The battery icon gives the battery status. After one hour the telephone is charged and the battery icon is full. If the telephone is switched off when in the desktop charger, it as switched on automatically within 2 minutes.

14 Headset connector

The headset connector, waterproof, is located on top of the rear side. The headset answer button is only active during call or ringing state.

Note: Headset connector is optional.

Display info

- Icon line+ Hour

Function keys. In idle state, names defined by the user. In Menu mode, operation keys in relation with the context.

Icons of the first line

Audio signal off

Shown when all alert signals, including ring signal, message tone, key beep etc. are turned off. High priority messages will however override this setting.

Battery

Always shown in the display in idle mode. When the level is low it is time to charge the battery.

Loudspeaking (handsfree)

Shown when the loudspeaker is activated and the Cordless is in Loudspeaking operation (handsfree).

New message

Displayed when receiving a new SMS message or voice mail. The digit on right side gives the number of new SMS messages, plus 1 for one/more voice mails. This symbol is displayed till the messages are read.

Not answered call

Added to not answered calls in the call list. The number on the right side of the icon shows the total number of missed calls.

Key

Indicates that your keypad is locked.

Padlock

Indicates that the Cordless has been locked, and has to be unlocked with a code before it can be used

Headset

Indicates that a headset is connected to the Cordless.

Note: A headset can only be connected if the optional headset connector is available.

No-movement alarm on (DT422 only) Indicates that the No-movement alarm is activated. Man-down alarm on (DT422 only)

Indicates that the Man-down alarm is activated.

- 2 lines x 20 characters System info, No/ID you modify/ dial,

- Info about terminal status

- Function keys

Upper case text input

Indicates that you can type upper case letters and numbers in text input mode.

Lower case text input

Indicates that you can type lower case letters and numbers in text input mode.

Number input

Indicates that you can type numbers in text input mode.

Incoming call

Added in front of incoming calls in the call list.

Outgoing call

Added in front of outgoing calls in the call list.

Unread message

In front of unread messages in the message list

Read message

In front of read messages in the message list

Interactive message

In front of interactive message in the message list

Read interactive message

In front of a read interactive message in the message list

Add contact

Appears on a Soft key when a phone number is marked in the call list. It indicates that it is possible to add the phone number to the local phone book.

Contacts

Displayed when it is possible to get a phone number from the local phone book, for example to add it to a function.

Diversion indicator

When displayed before a name or number it indicates that the phone is diverted to another extension.

Phone Book

The SIM card includes a personal phone book of up to 100 entries. Each entry consists of one number (up to 22 digits) and a name (up to 16 characters). Enter the SIM phone book:

Add a name and a number in the phone book Press nd enter the name Add a

Press ã when the name is complete

Enter the number and press Save

Change a name and a number in the phone book Scroll up and down until you find the name

Press and change the name Edit

Press ã when the name is complete

Change the number and press Save

Enter letters of the name

Press 1/2/…times the digit key as required. Example : 7777 to enter letter S or 6 to enter letter M. See below table. Press ã when the name is complete.

Control k . eys

à to shift left á to shift right * to switch from upper to lower case. A long hit activates

or de-acti ates the tone sending. v

0 to enter a space

C (on screen) to change a wrong entry. A long hit deletes

the whole entry.

Menu configuration

For navi ng in the menu: gati

ç or exit the menus to enter à or á o select the required tab+ ã open it t to ã or â to select the required option+ á to enter it.

Messages

Message list >

Contacts

Local phone book >

Central phone book Call list >

Modes Normal Volume >

In charger > Ring signals > Mode 2 > Vibrator (on/off) Mode 3 > Key beep (on/off) Mode 4 > Alarm settings * > Mode 5 > Absence (Yes/No)

Mode 6 > Answer > Mode 7 > Soft key Mode 8 > Name: … Mode 9 > Switch off

Service Service 1 >

Service 2 > . . Service 10 >

Settings Alert signals Volume >

Ring signals > Vibrator (on/off) Key beep (on/off)

Alarm settings Man-down (on/off)

Left: > Soft key > Middle: > Right: >

Hot key > 0, 1, 2…9 >

General > Language > Text size > Clock Auto key lock Quick answer Owner ID

System > Select system > Register > Information >

* Available only with DT 422 and DT432 ATEX ** Available only with DT412 and DT422

* > No-movement (on/off)