2 |
Aprisa SR+ Product Description
Compliance General
The Aprisa SR+ radio predominantly operates within frequency bands that require a site license be issued
by the radio regulatory authority with jurisdiction over the territory in which the equipment is being
operated.
It is the responsibility of the user, before operating the equipment, to ensure that where required the
appropriate license has been granted and all conditions attendant to that license have been met.
Changes or modifications not approved by the party responsible for compliance could void the user’s
authority to operate the equipment.
Equipment authorizations sought by 4RF are based on the Aprisa SR+ radio equipment being installed at a
fixed location and operated in point-to-multipoint or point-to-point mode within the environmental profile
defined by EN 300 019, Class 3.4. Operation outside these criteria may invalidate the authorizations and /
or license conditions.
The term ‘Radio’ with reference to the Aprisa SR+ User Manual, is a generic term for one end station of a
point-to-multipoint Aprisa SR+ network and does not confer any rights to connect to any public network or
to operate the equipment within any territory.
Compliance European Telecommunications Standards Institute
ETSI compliance pending for the Aprisa SR+.
Compliance Federal Communications Commission
FCC compliance pending for the Aprisa SR+.
Compliance Industry Canada
IC compliance pending for the Aprisa SR+.
Loading...