3sixt 3S-1112 User Manual

HIGHTONE

Wireless Speaker

3S-1112

USER GUIDE

ACCESSORIES

Micro USB Cable ( for charging )

3.5mm Audio cable ( AUX-in cable )
User Manual

WIRELESS CONNECTION

Turn the speaker on by long pressing the power switch for three
seconds. The Blue LED light flashes quickly, the speaker now has
entered wireless pairing mode.

1) Connect to mobile phone/tablet or PCs/laptop:

2) Activate your device's Bluetooth

3) Go to your device's Bluetooth seings, scan for new Bluetooth
devices

4) Upon device found (3S-1112), click the device name and pair with
it

5) If your device asks for a pairing code, please enter ”0000”
and confirm

6) Aer successful pairing, your speaker will sound a prompt tone
and the LED lights blue.

Note:

Pairing time is varied with dierent devices. The 3SIXT Hightone
speaker supports the “auto reconnect” feature. The speaker will
remember the last 8 paired devices.

2

SPECIFICATIONS SPEAKER SPECIFICATIONS

5 6

1

2

3

4

Buons & Ports

1 Power On/O

2 Next song /volume up:

long press /short press

3 Hands free, play/pause

4 Previous song /volume down:

long press /short press

5 Micro USB port for charging

6 AUX-IN

3 4

Wireless compatibility

Transmission distance

Signal to noise ration S/N

Frequency Range

Distortion THD

Speaker unit

Rated voltage

Baery

Charging time

Working time

Size

Wireless v4.1

Up to 10m

≥ 80dB

180Hz-20KHz

≤ 1%

Outer diameter 50 mm, inner magnet, 4 ohms, 3W

3.7V DC

Built-in lithium baery, 3.7V/500mA

2-3 hours

5-8 hours

92.4 x 33 x 84 mm

LED STATUS

1. Wireless status:

• Blue light flashing for pairing.

• Blue light solid for connection status.

2. Line in mode:

• Green & blue light on

3. Charging status:

• Red light on

4. Charging completed

• Red light o

AUX -IN FUNCTION:

The 3SIXT Hightone speaker also features 1x AUX audio in port, simply
connect the speaker with your non-wireless mobile phone/MP3
player/PC/laptop with the 3.5' jack audio cable.

The green and blue LED will be illuminated, you can now play music
via the wired connection.

LOW POWER INDICATION:

The 3SIXT Hightone Speaker will make a voice prompt to remind you
to charge the baery if the remaining baery is below 10%. Please
connect your 3SIXT Hightone speaker to a power source to fully
recharge the baery.

CHARGING:

Connect the micro USB charging cable to a 1.0A USB charger or
computer, the red LED indicator will illuminate to indicate that the
speaker is in charging mode.

The Red LED will go out once the charging is finished.
(Approx 2-3 hours charging time using a 1.0A USB charger.)

5 6

TROUBLE SHOOTING

1. My device can’t find any new Bluetooth® devices

a) Make sure the 3SIXT Hightone Speaker has entered pairing mode.
b) Ensure the 3SIXT Hightone Speaker is within the eective

working range (10m).

2. Bluetooth® devices cannot pair

a) Make sure your device allows new Bluetooth® connections.
b) Make sure the pairing password entered is ’0000’. If you are using

a Bluetooth® transmier device, please ensure the responding
password of your Bluetooth transmier supports the ‘0000’
code.

3. My 3SIXT Hightone Speaker does not play music or answer
calls when it is connected to a Bluetooth® device

a) Make sure your Bluetooth® device supports A2DP and HSF

profile.

b) Ensure your Bluetooth® enabled device is within the eective

working range.

4. When paired with my computer, Windows asks for a new
driver. Can you supply?

Sorry, we do not supply drivers. Please visit your PC manufacturer’s
website for the latest driver updates.

5. Is the 3SIXT Hightone Speaker waterproof?

No, the 3SIXT Hightone Speaker is only water resistant.
It has a Level 5 water ingression rating that means it can
sustain low pressure water jets for 30 minutes. It cannot
be fully submerged in water.

6

IMPORTANT SAFETY INFORMATION

Read the following recommendations before using the
3SIXT Hightone Wireless Speaker:

• Before recharging the 3SIXT Hightone Speaker through a wall
outlet, make sure wall charger outlet voltage is 5V 1A;

• Make sure to use the Micro USB Charge Cable that came with
this product, other cables may damage your 3SIXT Hightone
Speaker;

• Do not drop, knock, disassemble or aempt to repair the 3SIXT
Hightone Speaker.

• Do not immerse or put the 3SIXT Hightone Speaker in water.
Store the 3SIXT Hightone Speaker in a dry place;

• Do not expose the 3SIXT Hightone Speaker to excessive heat
including direct sunlight and fire;

• Do not use the 3SIXT Hightone Speaker near explosive gases
or flammable materials;

• Do not burn or incinerate the 3SIXT Hightone Speaker;

• Do not expose the 3SIXT Hightone Speaker to harsh chemicals;

• Keep the 3SIXT Hightone Speaker away from young children;

• Puing anything in the 3SIXT Hightone Speaker’s input or

output ports other than the supplied Micro USB Charge Cable
or your device’s charging cable will cause damage or short out
the 3SIXT Hightone Speaker;

• To extend the 3SIXT Hightone Speaker’s charging life, do a
complete recharge of the 3SIXT Hightone Speaker every four
months.

3S-1112

For more information, visit

www.3sixtgear.com or visit
www.3sixtgear.com/support

3SIXTgear

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.