3sixt 3S-0683 User Manual

HD SPORTS
ACTION CAMERA

QUICK START GUIDE

IMPORTANT SAFETY INFORMATION

Please read the instructions carefully before using this
camera for proper and safe operation.

• Please check the camera operates normally before use.

• Do not expose the camera to direct sunlight, or point its
lens to sunlight - the image sensor may get damaged.

• Take good care of the camera and prevent water or sand
particles from entering the housing when it is used on the beach
or in water. Water, sand particles, dust or composites containing
salt may damage.

• Keep the camera free of dust and chemical materials. Place
it in a cool, dry and well ventilated environment. Do not place the
camera in a high temperature, moist or dusty place.

• If dust or dirt is accumulated on the camera or on its lens -
use a so, clean and dry cloth to wipe away gently.

• Do not use a cloth to wipe sand particles. Blow them away
gently then wipe the camera gently with a cloth suitable for
optical devices.

• Do not use solvents to clean the camera.

• Do not touch the lens surface with your fingers.

Welcome

This Quick Start Guide will give
you the basics on how to enjoy

your 3SIXT Action Camera.

For more information,
visit www.3sixtgear.com

THE BASICS

3

6

1

4
5

2

7

8

9

11

10

12

1

Power/Mode Buon

2

Lens

3

Microphone

4

microSD Slot

5

Micro USB Port

6

Screen

Up

7

8

Speaker

9

Down

10

Shuer Buon

11

Indicator Light

Baery Door

12

SET UP

1. Insert a compatible
microSDHC card (requires
at least a Class 10 or
microSDHC card up to
32GB- not included).

2. Charge using the included
USB cable. The LED status
light turns o when fully
charged.

3. Before use, gently remove
the plastic film on the lens
and screen.

CAPTURE MODE

Changing the capture mode

VIDEO I PHOTO I PLAY BACK I SETTING

Turn camera ON and repeatedly press the Power/Mode Buon to
cycle through camera modes and seings. The modes will appear in
following order:

VIDEO PHOTO

720P

5M

17:51:34

2016/01.01

SETUP PLAY BACK

2016/01.01

17:51:34

SETTINGS

Changing the seings

Press the Power/Mode Buon to enter the seings menu.
Repeatedly press the Up/Down to cycle through the options and
press the Shuer/Select Buon to select the desired option.

ACCESSORIES

HOUSING

ADHESIVE CLIP

BASE

CAMERA CLIP

HOUSING

WATERPROOF

HOUSING MOUNT

HANDLEBAR/
POLE MOUNT

CLIP HOUSING

MOUNT

SUCTION MOUNTWATERPROOF

HANDLEBAR/

HELMET

MOUNT ADAPTER

HELMET STRAPS

ACCESSORIES

Waterproof Housing

CAMERA IS SUBMERSIBLE UP TO 30M IF
THE CAMERA IS CORRECTLY SEALED IN
THE WATERPROOF HOUSING

1. Release the secure clasp of the waterproof housing.

2. Inspect the water sealing gasket to be sure it’s in
good condition.

3. Test the gasket by closing the housing without
inserting the camera. Submerse the housing
completely in a bowl of water for about a minute.

4. Remove the housing from the water, dry o and
then open the housing.

5. If the entire interior is dry, the housing and gasket
are safe for use under water.

6. Remember to put the Mode Switch in your
desired recording position before inserting the
camera in the waterproof housing.

ACCESSORIES

Waterproof Housing Assembly

+

Clip Housing Assembly

+

=

=

ACCESSORIES

Helmet Mount Assembly

Option 1

Option 2

+

+

+

+

+

+ +

=

=

ACCESSORIES

Handle Bar Mount Assembly

Option 1

Option 2

+

+

+

+ +

=

=

MEMORY CARDS

This camera supports a Class 10 microSDHC Memory Card (up to
32GB). Please insert a compatible microSDHC Memory card before
use. Memory cards are not included and need to be purchased
separately. Please back up data stored on the memory card.

Memory cards are manufactured from precise electronic
components. Data may be lost or damaged under the following
circumstances:

• The memory card is bent, dropped or damaged;

• place it under high temperature or a moist environment or
expose to sunshine directly;

• electrostatic or electromagnetic field exists around the
memory card;

• The memory card is taken out or power supply is interrupted
when this camera or computer is connected to the
memory card (i.e. during reading, writing or formaing); or

• touching the metal contact surface of the memory card
with your fingers or metallic materials.

We recommend Class 10 microSD cards for maximum performance

SYSTEM REQUIREMENTS

Windows

Microso® Windows XP with

•

Service Pack 3, Windows Vista
with Service Pack 1 or Windows
7 or later

• Pentium® 4 processor (or

above) 1 GB of RAM, 250 MB
available hard disk space

• QuickTime® 6 or higher

Microso® Internet Explorer 7
or higher Windows Media
Player 10 or higher DirectX 9
or higher

Macintosh

Intel processor running Mac

•

OS X v10.5.x or later

• QuickTime® 6 or higher, 1 GB

RAM, 250 MB available hard disk

TECH SPECS

Image Seings Auto ISO

Lens 90° Viewing Angle

Video
Resolution

Picture
Resolution

eatures Motion Detect, Loop Recording, Voice

F

Storage Media

(not included)

File Format AVI / JPG

Input/Output Micro USB (5V 1A)

Power
Source

System
requirements

Recording time 70 mins (using 720p/32GB microSD)

Charging time 3 hours

Dimensions 59 x 41 x 29 mm

Weight 50g

20p@30fps (1280 x 720)

7
480p@60fps (848 x 480)

12MP
8MP
5MP

Record, Exposure Adjustment, Time­delay, Power Frequency Adjustment

microSD / microSDHC
(up to 32GB)

echargeable

900mAh r
Lithium-ion baery

Windows XP or newer
Mac OSX 10.5x or above

For more information, visit

www.3sixtgear.com

or visit www.3sixtgear.com/support

3S-0683