SNAP STICK
Wireless Smartphone
Camera Stick with Bluetooth
®
USER GUIDE
Geing familiar with your
3SIXT SNAP STICK
Snap
Stick
1
c
‘Press’
Button
3
Stopper
SNAP STICK
2
4
b
USB Charging Port
ad
Clamp
USB Cable
ON/OFF switchLED Light
GETTING STARTED for the first time
The 3SIXT Snap Stick is based on Bluetooth HID* wireless
communication technology – just pair, smile and snap.
Charge Snap Stick for 60 minutes before use to maximise
your time, using the supplied USB Cable (4). The USB Cable can
be inserted into a USB 2.0 or 3.0 port on a computer, USB wall or
car charger. Also, before pairing, turn off nearby Bluetooth
devices to avoid signal interference e.g. Bluetooth keyboards,
mice, speakers etc.
1. For iOS smartphones (iPhone)
1. Turn Snap Stick ON ( a). A blue LED light ( d) should
start flashing.
2. Go to ‘Settings’ > ‘Bluetooth’ on your smartphone.
3. Turn ‘Bluetooth’ ON or device will automatically ‘Scan’.
4. Wait for your device to find ‘kjstar’.
5. Select ‘kjstar’ to pair Snap Stick with your Camera#.
The blue LED light ( d) should flash quickly to indicate
that Snap Stick and your smartphone are paired.
For Android smartphones
(e.g. Samsung, HTC, LG, Nokia, Sony)
1. Turn Snap Stick ON ( a). A blue LED light ( d) should
start flashing.
2. Go to ‘Settings’ > ‘Bluetooth’ on your smartphone.
3. Turn ‘Bluetooth’ ON or press ‘Scan’.
For more information and support visit www.3sixtgear.com/support
4. Wait for your device to find ‘kjstar’.
5. Select ‘kjstar’ to pair Snap Stick with your
Camera#. The blue LED light ( d) will continue to
flash quickly to indicate that Snap Stick and your
smartphone are paired.
You must operate Snap Stick within 40 seconds from
this pairing otherwise a re-start, re-scan and re-pairing
of Snap Stick may be needed.
2. Fixing your smartphone to the clamp (2) then
Snap Stick (1)
Place your device into the device clamp
device is too small, use the stopper
(2)
. If your
(3)
. Fix the device
clamp onto the screw of the Snap Stick.
3. Operating Snap Stick with your camera app
1. Go to your smartphone’s standard camera app^
and make sure you can see yourself on the screen
by pressing the camera flip icon - (iOS) or
(Android) - if not already.
2. Stretch the shaft of the Snap Stick to the desired
length (up to 1 metre).
3. Wait for you camera to auto-focus on you and
click the ‘Press’ button
Please note: Snap Stick automatically goes into ‘standby mode’ or sleep
within 2 hours of inactivity. To ‘wake’, press the Snap button (Snap Stick will
awaken 5 seconds later).
INDICATIONS & TROUBLESHOOTING
LED light does not light up
when Snap Stick is turned ON
There is no power le –
charge Snap Stick
Blue LED light flashes once Snap Stick is taking a photo
Blue LED light keeps
flashing quickly
Blue LED light keeps
flashing slowly
Snap Stick is pairing with
your device or Snap Stick
is waking up from Standby/
Sleep
Snap Stick’s baery is low charge Snap Stick
Red LED light is on Snap Stick is charging
SPECIFICATIONS
Working environment
temperature
Working environment
relative humidity
Baery capacity 45mAH
Charging voltage DC 5.0V
Charging time 1 hour
Standby time 100 hours
Autosleep/Standby 2 hours without use
*A Bluetooth HID device is a device providing the service of human or other data input and
output to and from a Bluetooth HID Host. Examples of Bluetooth HID devices are keyboards,
mice, gaming controllers, gamepads, remote controls, voltmeters and temperature sensors.
#
The pairing of Snap Stick to your camera is only needed once. If you ‘restore’ or ‘reset’ your
device to factory settings after pairing, you may have to re-pair Snap Stick to your device.
^
The standard camera app is the app that came packaged with the device. Third party camera
apps may not behave according to Snap Stick’s User Guides instructions.
-10° to 40°
10% to 90%
COMPATIBLE DEVICES
The Snap Stick is
only compatible with
Bluetooth version 3.0 or newer, running iOS 4.0
or newer and Android 3.0 or newer.
smartphones with
CAUTION & SAFETY
• Please read the User Guide carefully before use
• Please do not dismantle Snap Stick
• Please do not use corrosive solvent to clean it
• Do not charge Snap Stick under high temperature
conditions
• Do not use Snap Stick in wet or damp conditions
• Do not dispose Snap Stick into fire
• Do not knock or drop Snap Stick
For more information visit
www.3sixtgear.com/support
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. iPod, iPhone, iPad are trademarks of Apple Inc.,
registered in U.S. and other countries.
Loading...