3sixt 3S-0383 User Manual

USER GUIDE

JetPak Pro 10400mAh Rechargeable Power

Fully charge JetPak for at least 5 hours through

1

a wall outlet before first use (see step ➋).

To recharge JetPak Pro

2

Insert the supplied USB 2.0 cable (micro USB
end a) into JetPak Pro’s 5V input port b.
Insert USB end of cable c into the USB 2.0 port
of your wall adaptor, laptop or PC d.

h

e

b

To recharge your device

3

Insert your device’s charging cable
(USB 2.0 end c) into one of JetPak Pro’s
5V output ports e. Insert the connector
end of your device’s cable f into the
charging port of your device g. It may
be necessary to press the power buon h
to start recharging.

a

c

d

c

d

f

g

Important Safety Information

PLEASE READ BEFORE OPERATION

1. Before recharging JetPak Pro through
a wall outlet make sure wall outlet
voltage is 5V.

2. Make sure to use a standard USB 2.0
Charge Cable with the appropriate
specifications - other cables may damage
your smartphone or tablet.

3. Do not drop, knock, dissasemble or
aempt to repair JetPak Pro.

4. Do not immerse or put JetPak Pro in
water and keep JetPak in a dry place.

5. Do not expose JetPak Pro to excessive
heat including sunlight and fire.

6. Do not use JetPak Pro near explosive
gases or flammable materials.

7. Do not burn or incinerate JetPak Pro.

8. Do not expose JetPak Pro to harsh
chemicals.

9. Keep JetPak Pro away from young
children.

10. Puing anything in JetPak Pro’s input
or output ports, other than a standard
USB 2.0 charging cable or your devices
charging cable will cause damage or
short out JetPak Pro.

11. To extend JetPak Pro’s charging life, do
a complete recharge on JetPak Pro every
four months.

3S-0383