3sixt 3S-0226 User Manual

USER GUIDE

JetPak 13000mAh Rechargeable Power

Fully charge JetPak for at least 5 hours through

1

a wall outlet before first use (see step ➋).

To recharge JetPak

2

Insert the supplied USB 2.0 cable (micro USB
end a) into JetPak’s 5V input port b. Insert
USB end of cable c into the USB 2.0 port of
your wall adaptor, laptop or PC d.

e

a

b

To recharge your device

3

Insert your device’s charging cable
(USB 2.0 end c) into one of JetPak’s
5V output ports e. Insert the connector
end of your device’s cable f into the
charging port of your device g. It may
be necessary to press the power buon
to start recharging.

To operate flashlight

Double-click h fast to turn flashlight on, double-click

c

d

c

d

f

h

to turn flashlight o.

g

Important Safety Information

PLEASE READ BEFORE OPERATION

1. Before recharging JetPak through
a wall outlet make sure wall outlet
voltage is 5V.

2. Make sure to use a standard USB 2.0
Charge Cable with the appropriate
specifications - other cables may
damage you smartphone or tablet.

3. Do not drop, knock, dissasemble or
aempt to repair JetPak.

4. Do not immerse or put JetPak in
water and keep JetPak in a dry place.

5. Do not expose JetPak to excessive
heat including sunlight and fire.

6. Do not use JetPak near explosive
gases or flammable materials.

7. Do not burn or incinerate JetPak.

8. Do not expose JetPak to harsh
chemicals.

9. Keep JetPak away from young
children.

10. Puing anything in JetPak’s input or
output ports, other than a standard
USB 2.0 charging cable or your
devices charging cable will cause
damage or short out JetPak.

11. To extend JetPak’s charging life, do
a complete recharge on JetPak every
four months.

3S-0226