3M ZIP DIP User Manual
.100"
ZIP
DIP
(2.54 mm) DIP Sockets
• For DIPs with .100" (2.54 mm) lead spacing
• Pin counts for 14-64 leads
• Lever actuated zero insertion force mechanism
• Socket easily disassembles for repairability
• Socket contact point of .110" (2.79 mm)
below top surface of socket
12
Physical
Electrical
Insulation Resistance:
W
Insulation
Material: Glass
Flammability:
Marking:
Material:
Curr
ent Rating:
ithstanding V
Color: Green
Contact
Plating:
oltage:
Date Issued: July 11, 2001
Filled Polysulfone
UL 94V
3M Logo & Part Number Identifier
Beryllium Copper
30 m" (0.76 mm) Gold over 50 m" (1.3 mm) Nickel
1 Amp
> 1 ¥ 109 W at 500 Vdc
1000 V
-0
rms at Sea Level
TS-0365-14
Sheet
1 of 3
Environmental
Operating T
emperatur
e Rating:
- 55∞C to +150
∞C
Mechanical
When used as a test socket at room temperature 24∞C the socket will last
3M Electronic Handling and Protection Division
For
6801 River Place Blvd.
Austin, TX 78726-9000
technical, sales or ordering information call
20,000 actuations
or visit our website: http://www.3M.com/ehpd
.
800-328-0411
.100"
ZIP
DIP
(2.54 mm) DIP Sockets
A
.47
[ 11.9 ]
Contact T
.110
[ 2.79 ]
Length
F
D
TEXTOOL
2XX-XXXX-00
3M
3
.020
[ 0.51 ]
Standoffs
ail
.012 X .030
[ 0.30 X 0.76 ]
Contact T
2.40
[ 61.0 ]
ails
.100 Typ.
[ 2.54 ]
.09
[ 2.3 ]
.325
[
8.26 ]
C
.46
[ 11.6 ]
.48
[ 12.3 ]
1
2
B
Closed
Notes:
1 This
2
dimension is .105 [ 2.67 ] for the 48 and 64 lead sockets.
This dimension is .40 [ 10.2 ] for the 48 and 64 lead sockets.
224-1275-00-0602J, 228-1277-00-0602J, 232-1285-00-0602J, 240-1280-00-0602J,
3
242-1281-00-0602J, and 248-1182-00-0602J have thru holes and no screws.
Ordering Information
See tables on the next page.
3M
Electronic Handling and Protection Division
6801 River Place Blvd.
Austin, TX 78726-9000
E
Dimension
Tolerance
For
technical, sales or ordering information call
or visit our website: http://www.3M.com/ehpd
Tolerance
inch
(mm)
.000
.00
(.00)
(.0)
± .010 ±
(±
.005
.25)(± .13)
TS-0365-14
Sheet
2 of 3
800-328-0411
Loading...