3M Peltor Bull’s Eye Service Manual
Technical Datasheet
Peltor
™
Bull’s Eye Range
™
Passive Earmuffs
Product Description
The Peltor™ Bull’s Eye™ passive range foldable
earmuffs are available in three different colours;
military green, black and red. These products are
designed to provide moderate to high level of attenuation that meets the needs of sports shooters and
hunters.
When correctly selected and worn these products help
reduce exposure to hazardous levels of noise and
loud sounds.
NOTE: This technical fact sheet applies to Peltor™
Bull’s Eye™ I, however, for information on Bull’s Eye™
II and III please refer to the 3M™ Peltor™ Optime ™ II
and III products as they are identical with the exception of colour.
Key Features
• Modern, stylish slim line cup design
• Bevelled cup increases compatibility with
hunting/shooting weapons
• Liquid sealing rings for improved comfort (Peltor™
Bull’s Eye™ I and II only)
• Unique low profile headband design helps maintain
constant pressure thus providing confidence in
protection
• Large space inside cup helps reduce moisture and
heat build-up
• Soft wide cushions helps reduce pressure around
the ears and improves comfort and wearability
• Easy to replace cushions and inserts helps keep
them hygienically clean
•
Easy to understand attenuation symbol to help ensure
correct product selection
Applications
The Peltor™ Bull’s Eye™ range earmuffs are ideal for
protection against noise arising from many sports
shooting and hunting activities.
Examples of typical applications include:
• All kinds of sport shooting, including clay pigeon
• Hunting
Attenuation values
Frequency
(Hz)
Mf (dB)
sf (dB)
APVf
(dB)
SNR = 27dB H = 32dB M = 24dB L = 15dB
Key
APVf (dB) = Mf – sf (dB)
Mf = Mean attenuation value
sf = Standard deviation
APVf = Assumed Protection Value
H = High-frequency attenuation value (predicted noise level reduction for noise with L(C) –
L(A) = -2dB)
M = Medium-frequency attenuation value (predicted noise level reduction for noise with
L(C) – L(A) = +2dB)
L = Low-frequency attenuation value (predicted noise level reduction for noise with L(C) –
L(A) = +10dB)
SNR = Single Number Rating (the value that is subtracted from the measured C-weighted
sound pressure level, L(C) in order to estimate the effective A-weighted sound pressure
level inside the ear).
63
13.1
3.2
10.0
125
10.9
3.2
7.7
250
17.2
2.5
14.8
500
26.6
2.2
24.4
1000
28.3
2.7
25.6
2000
33.5
2.6
30.9
4000
37.8
2.0
35.7
8000
37.9
2.6
35.3
Technical Datasheet
™™
Peltor
Bull’s Eye Range
Passive Earmuffs
Standard & Approval
The Peltor™ Bull’s Eye™ range earmuffs are tested
and CE approved against the European Standard
EN352-1:2002. These products meet the Basic Safety
Requirements as laid out in Annex II of the European
Community Directive 89/686/EEC and have been
examined at the design stage by the Finnish Institute
of Occupational Health (FIOH), Topeliuksenkatu 41aA,
FIN-00250 Helsinki, Finland (Notified Body number
0403).
Materials
The following materials are used in the manufacture of
this product.
Accessories/Replacement Parts
The cushions and inserts on the Peltor™ Bull’s Eye™
can be replaced with the HY51 Hygiene Kit for
improved comfort and reassured protection. For
military green version please refer to Hygiene Kit
HY51 GN.
The HY100A and HY100A-01 Hygiene Pads can be
placed on the cushions to help absorb moisture and
sweat.
Specially designed safety spectacles, available in
three different lenses, helps compliment the Peltor™
Bull’s Eye™ range earmuffs.
Component
Headband
Headband padding
Cups
Inserts
Cushions
Cushion cover
Material
Stainless Steel Wire, PVC, Acetal
PVC
ABS
Polyether
Polyether
PVC
3M Occupational Health & Safety
Products EMEA Division
3M Svenska AB
Mammstensgatan 19
331 02 Värnamo Sweden
Visit us: www.3M.eu/OccSafety
Please recycle.
© 3M 2009. All rights reserved.
Secondary address
3M Operating Unit
Address
City, State, Postal Code
Country
Phone
Fax
Email
Website address
Please recycle.
© 3M 2009. All rights reserved.
Important Notice
3M does not accept liability of any kind, be it direct or consequential (including, but
not limited to, loss of profits, business and/or goodwill) arising from reliance upon
any information herein provided by 3M. The user is responsible for determining the
suitability of the products for their intended use. Nothing in this statement will be
deemed to exclude or restrict 3M’s liability for death or personal injury arising from
its negligence.
Version/Codes number
Loading...