.050″ Straight and Right Angle, Thru-HoleP50E Series
• P50E Plug offers straight and right angle
thru-hole options
• Right angle P50E Plug comes with and without
retention clips
• Latch/eject mechanism maintains a secure
connection
• Mates to the P50E wiremount socket
• RoHS compliant* version (EA plating suffix)
available
Date Modified: February 24, 2006
TS-1144-02
Sheet 1 of 3
Physical
Electrical
Insulation Resistance:
Withstanding Voltage:
Environmental
Temperature Rating:
Insulation
Material:
Flammability:
Color:
Contact
Material:
Plating
Underplating:
Wiping Area:
Solder Tails:
Retention Clips:
Current Rating:
Process Rating:
Glass Filled Nylon
UL 94V-0
Black
Copper Alloy
Nickel
10 µ″ [ 0.25 µm ] Gold
Tin Alloy over Nickel or Gold Flash (RoHS compliant)(see ordering information)
Tin Lead or Tin-Copper (RoHS compliant)
0.5 A
103 Ω at 500 VDC
650 VAC for 1 minute
-55°C to +85°C
260°C (ref J-STD-020C)
"RoHS compliant" means that the product or part does not contain any of the following substances in excess of the following maximum concentration values
in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent
chromium, polybrominated biphenyls or prolybromianted diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing,
3
Interconnect Solutions
http://www.3M.com/interconnects/
this information represents 3M's knowledge and belief based upon information provided by third party suppliers to 3M.
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 50 Boardmount Plug
.050″ Straight and Right Angle, Thru-HoleP50E Series
Product Table / Dimensions (For Straight and Right Angle)
Solder Tail/Clip Options:
S1 = Straight tails, without Retention Clips
SR1 = Right angle tails, without Retention Clips
RR1 = Right angle tails, with Retention Clips
3
Interconnect Solutions
http://www.3M.com/interconnects/
Plating Options:
TG = 10u" [.25um] gold with Sn-Pb solder tails
EA = 10u" [.25um] gold with gold flash solder tails
(RoHS compliant)
TS-1144-02
Sheet 2 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M™ Pak 50 Boardmount Plug
.050″ Straight and Right Angle, Thru-HoleP50E Series
Right Angle Plug with Retention Clips
Right Angle Plug without Retention Clips
3
Interconnect Solutions
http://www.3M.com/interconnects/
TS-1144-02
Sheet 3 of 3
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations
related to 3M’s products are based on information believed to be
reliable, but the accuracy or completeness is not guaranteed.
Before using this product, you must evaluate it and determine if it
is suitable for your intended application. You assume all risks and
liability associated with such use. Any statements related to the
product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall
have no force or effect unless expressly agreed upon, in writing,
by an authorized officer of 3M.
3
3M Electronics
6801 River Place Blvd.
Austin, TX 78726-9000
800/225-5373
www.3M.com/electronics
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and
manufacture for a period of one (1) year from the time of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING,
BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE. If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to
replace or repair the 3M product or refund the purchase price of
the 3M product. Except where prohibited by law, 3M will not
be liable for any indirect, special, incidental or consequential
loss or damage arising from this 3M product, regardless of
the legal theory asserted.