3M ES Specifications

a 3M company

EXPRESS SERIES

♦

ASME Code Design Housings on Demand!

Advanced Design and Manufacturing Technologies Allow for Fabrication of Custom Units within the Standard Production Cycle

Offering Superior Quality, Safety, Flexibility, and Economy!

Express Series®Filter Housings

Engineered For Safety, Flexibility, and Economy!

The result of CUNO’s unique Rapid Manufacturing System (RMS), a combination of advanced computer aided design and computer assisted manufacturing tools, the Express Series want, when you want it! The Express Series (ES) industrial housings are high quality ASME Code design housings available with various cartridge diaphragms to accommodate double open end (DOE), single open end (SOE), and Zeta Plus style filter cartridges. The filter housing, with outside diameters from 8 to 36 inches, can contain from 3 to 120 DOE or SOE cartridges of various heights, or up to 12 Zeta Plus cartridges, depending on the diaphragm chosen. The vessel includes ASME Code stamp and National Board certification to assure the customer that all materials and fabrication procedures meet the most stringent requirements.

The standard housing is offered with 150 or 300 psi designs and can be easily configured for specific system requirements. Options such as outlet and cover lifting device location (not available on model ES08), radiography, and surface finish can be added onto the base model to create one of the most versatile filter vessels in the industry.

Features

ASME Code design with stamp to ensure safety

♦

Available in 150 or 300 psi units

♦

Manufactured from 304L, 316L, or carbon steel to meet application

♦

requirements; special materials upon request

♦

User-friendly cover lifting device for easy cartridge changeouts

♦

DOE, SOE, and Zeta Plus Cartridge styles available for maximum filter cartridge applicability

♦

Available for cartridge lengths from 20” - 40”

♦

Nitrile, EPR, Viton or PTFE encapsulated Viton gasket materials

♦

Up and downstream gauge ports and drains

 filter housing delivers what you

Options

♦

Corrosion allowance available, consult factory

♦

Side outlet and cover lifting device location can be 90, 180 or 270° from the inlet.

♦

Standard swing bolt or Fast-Hex® bolt cover fasteners

♦

Full or spot radiography

♦

Choice of inlet/outlet flange size.

Applicable CUNO Filter Cartridges

Filter Product Literature Filter Product Literature

Betapure

Beta-Klean

Petro-Klean

Betafine

Micro-Klean

Micro-Wynd

MPF LITMPF001 Zeta Plus

Please note that double open-end cartridges require spring and seal assemblies. CUNO replacement media can include the integral spring end treatment, which eliminates the need for spring and seal assemblies.

-D LITBFD001 PolyKLEAN™ LITCPOLYKLN

III LITCMK001 Microfluor®II LITMRFA3

II LITCMW001 BevASSURE®II LITZRBA2

LITCBP001 PolyNet

LITCBK001 PolyPro

LITCPK001 PolyPro®XL LITPXLEL

LITCPPK001

LITPPC01

LITZPU02

Express Series®Filter Housing Specifications

General Information

The Express Series filter housing has the broadest range of configurations available in a standard filter housing line. The user can select from a wide variety of size, materials, pressure ratings, and many other features. Table 1 lists the Express Series housing general specifications.

TABLE 1. - GENERAL HOUSING SPECIFICATIONS

Aqueous Flow*

Base

Model

ES08

ES12

ES14

ES16

ES20

ES24

ES30

ES36

Material

Carbon Steel,

304L Stainless Steel,

316L Stainless Steel

Standard Flange

(Inches)

2 3 4 4 6 6 8

Applies to ALL Express Series Filter Housings

Housing Material Pressure @ Temperature

Carbon Steel

150 psi @ 450°F (10 bar @ 232°C) 300 psi @ 450°F (20 bar @ 232°C)

Stainless Steel

150 psi @ 250°F (10 bar @ 121°C) 300 psi @ 250°F (20 bar @ 121°C)

Drains

Gauge Connections

Vent

1 ½” NPT Female

¼” NPT Female

1” NPT Female

* Flow rate for DOE Standard housings without filters installed. The actual flow rate will be dictated by the filter media and cartridge style used. The total filter pressure drop is the sum of the housing drop and the cartridge drop.

@ 2 psid Housing

Pressure Drop

(gpm/lpm)

92 / 348

196 / 742

317 / 1200

362 / 1370

669 / 2532

805 / 3047

1369 / 5182

2045 / 7740

Housing Dimensions

The Express Series filter housing is designed and manufactured using state-of-the-art techniques. By engineering flexibility in design and exploiting advances in metal fabrication, CUNO is able to offer a “custom” design in a “standard” product line - in the same production cycle time as “off-the-shelf”product. Use Figure 1 in conjunction with Table 2 to determine general dimensions for a specific housing style. These measurements can be used to determine over-all space requirements. For all other uses, request a certified drawing.

TABLE 2. - GENERAL HOUSING DIMENSIONS

Base

Model

2 High 3 High 4 High

All Dimensions = Inches

ES08

ES12

ES14

ES16

ES20

ES24

ES30

ES36

52 62 72 18 21 8 39 62 72 82 18 21 10 39 65 75 85 22 23 11 45 65 75 85 22 23 12 45 69 79 89 23 26 15 49 69 79 89 23 26 17 49 76 86 96 24 32 20 56 76 86 96 24 32 23 56

Bottom Outlet Housing Dimensions (Inches)

ES08

ES12

ES14

ES16

ES20

ES24

ES30

ES36

52 62 72 27 11 8 38 61 71 81 27 11 10 38 64 74 84 30 13 11 43 64 74 84 30 13 12 43 70 80 90 33 17 15 50 70 80 90 33 17 17 50 80 90 100 36 24 20 60 80 90 100 36 24 23 60

BCDE

Express Series Housings

with Cover Lifting Device

(Models ES12 through ES36)

Bottom Outlet Side Outlet

FIGURE 1. - DIMENSIONS OF THE EXPRESS SERIES FILTER HOUSING

Express Series Housings

without Cover Lifting Device

Bottom Outlet

(Model ES08)

Side Outlet

+ 4 hidden pages