Boulevard de l’Oise
95006 Cergy Pontoise Cedex
France
Printed in U.S.A.
3M IPC, 2000. All Rights Reserved
March 2000, 78-6970-6748-2 Rev. D
3M Overhead Projector 9850
Illustrated Parts Breakdown
Revision History
Revision bars placed in the margins ( ) indicate where additions or changes to a parts identification list
occurred. Items deleted from a parts identification list are indicated on this page only. Changes to illustrations
are not indicated by revision bars, nor shown in this revision history.
The original issue of this manual and subsequent revisions are identified as follows:
BLADE, Fan, 4.00 CW, 5 Blade (Version 2 only)
78-8099-8767-6.
Added: (Version 1 only) to 115V/230V Crossflow
Fans.
Added: (Mitronic) to IGNITOR and added new
IGNITOR (Schieder) 78-8073-3049-9.
Added new: MOTOR, Fan, 100V (Version 2 only)
78-8099-8790-8, MOTOR, Fan, 120V (Version
2 only) 78-8099-8791-6, and MOTOR, Fan,
230V(Version 2 only) 78-8099-8792-4.
Added: (Version 1 only) to Thermostat (FNT)
78-8079-9010-2. Added new item: Thermostat
(FNT) (Version 2 only) 78-8079-8933-6.
Page 11Changed item 0 to 0A, and added new item 0B,
Focus Arm Upgrade Kit (Europe only)
(DY-0210-2704-9), and new item 0C, Focus Arm
Upgrade Kit (78-8054-1821-3).
Page 14Modified the art to show Version 1 Crossflow Fan
Assembly and added new Version 2 Fan Motor
components.
Page 15Added: (Version 1 only) to items 4, 5A and 5B.
Changed: item 6 from SCREW, Plastite,
6–19 x 5 x 16, 26-1002-4948-6 to SCREW,
Plastite, M3.5 x 8, DY-1117-1909-1.
Added: (Version 1 only) to 7A and added new 7B,
THERMOSTAT, Safety, (FNT) (Version 2 only)
78-8079-8933-6.
Added: new P/N and serial number break to item
12A from 78-8073-3135-6 BASE to
78-8097-3529-9 BASE ASSEMBLY – 9800
(Version 1 only). Added new item 12B
78-8099-8761-9 for Version 2.
3M 2000
i
3M Overhead Projector 9850
Illustrated Parts Breakdown
Revision History (Continued)
RevisionDatePage(s) ChangedChange
Rev. DMarch 2000Page 15 (Continued)Added the following for Version 2: item 16,
added new item 6B, IGNITOR (Schieder),
78-8073-3049-9.
Page 21Added: (Mitronic) to items 0A and 0B, and added
new item 0C, FRONT HOUSING AND POWER
SUPPLY ASSEMBLY, 190–250V (Schieder),
78-8073-3048-1.
3M 2000
ii
3M Overhead Projector 9850
Illustrated Parts Breakdown
Introduction
This Illustrated Parts Breakdown (IPB) contains the
information necessary to locate and identify specific
parts of the 9850 Overhead Projector
Part Numbers
All components available on a replacement basis are
listed with their 3M identification number. The parts
identification list opposite each illustration provides
the description adequate to identify components.
Locating and Identifying a Part
If physical appearance and general location of an item
are known:
1. Use the Overview illustration to determine which
section includes the item.
2. Refer to the section and locate the item on the
exploded view illustration.
The part identification numbers provided in this
manual are from the most current data available.
Make sure part identification numbers for your
component have not been amended by changes and
updates made to your 9850 Overhead Projector.
Machine Identification Plate
The Machine Identification Plate is located on the
bottom side of each projector and lists specific
information that is needed when calling for technical
assistance or ordering parts.
Ordering Parts
When ordering parts, include part identification
number, description, quantity and the following
information:
1. Product Name: The specific version number of
the projector.
2. Model Number/Alpha Code: The series number of
the projector followed by a three or four character
alpha code identifier. The Alpha Code indicates
the design level, specific product characteristics,
power cord or distribution specific to a country. A
three character alpha code indicates this
distribution is only for USA and Canadian
distribution.
3. MFG Code: The MFG Code indicates the year
and quarter the projector was built.
MFG Code
LetterDigit
C19951Jan – Mar
D19962Apr – Jun
E19973Jul – Sep
F19984Oct – Dec
4. Lamp: The electrical rating of the lamp.
5. S/N: The serial number assigned to this projector.
1
3M 9850 OVERHEAD PROJECTOR
MODEL 9000AJL
13.0
D1
575
98580174
53
95
GERMANY
2
LISTED
316N
c
4
__________________________________________
Figure 1. Machine Identification Plate
3M 2000
Revision Bars
Revision bars placed in the margins indicate where
additions or changes occurred. Refer to the Revision
History to identify specific additions and changes.
For part orders contact:
Dealers:Refer to Dealers Guide