9600
OverheadProjector
IllustratedPartsBreakdown
3MVisualSystemsDivision
6801RiverPlaceBoulevard
Austin,Texas78726-9000
PrintedinU.S.A.
E 3M 4/96 78-6970-6708-6
IPB – Table of Contents 3MOverhead Projector 9600 Series
Introduction 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Part Numbers 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Locating and Identifying a Part 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Machine Identification Plate 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 0 OVERVIEW 75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 1 OPEN TRIPLET HEAD ASSEMBLY 76. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 2 ARM AND FOCUS ASSEMBLY 78. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 3 FOLDING POST ASSEMBLY 710. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 4 TOP COVER and TRAVEL COVER 712. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 5 FXL BASE ASSEMBLY 714. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 6 FRAME ASSEMBLY 716. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 7 COOLING FAN 718. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 8 FXL DUAL LAMP HOUSING 720. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 9 LAMPCHANGER and HI/LO LAMP CONTROL MODULE 722. . . . . . . . . . . . . . . . . . . . . . .
Section 10 WIRE JUMPERS 724. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A SPECIFICATIONS 25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3M 1996
TOC i
Model 9600 Overhead Projector
Illustrated Parts Breakdown
Introduction
This Illustrated Parts Breakdown (IPB) contains the
information necessary to locate and identify specific
parts of the 9600 Overhead Projector.
Part Numbers
All components available on a replacement basis are
listed with their 3M identification number. The parts
identification list opposite each illustration provides
the description adequate to identify components.
Locating and Identifying a Part
If physical appearance and general location of an item
are known:
1. Use the Overview illustration to determine which
section includes the item.
2. Refer to the section and locate the item on the
exploded view illustration.
The part identification numbers provided in this
manual are from the most current data available.
Make sure part identification numbers for your
component have not been amended by changes and
updates made to your 9600 Overhead Projector.
When ordering parts, include part identification
number, description, quantity and the following
information:
1. Product Name: The specific version number of
the projector.
2. Model Number/Alpha Code: The series number of
the projector followed by a three or four character
alpha code identifier. The Alpha Code indicates
the design level, specific product characteristics,
power cord or distribution specific to a country.
3. MFG Code: The date the projector was
manufactured. See example below:
MFG Code
Letter Digit
A 1994 1 Jan - Mar
C 1995 2 Apr - Jun
D 1996 3 Jul - Sep
E 1997 4 Oct - Dec
F 1998 1 Jan - Mar
Machine Identification Plate
The Machine Identification Plate is located on the
bottom side of each projector and lists specific
information that is needed when calling for technical
assistance or ordering parts.
Figure 7-1. Machine Identification Plate
4. Lamp: The electrical rating of the lamp.
5. S/N: The serial number assigned to this projector.
For part orders contact:
Dealers: Refer to Dealers Guide
3M Subsidiaries: Contact Export Operations
Retail Customers:
FAX: 1-800-852-3917
Telephone: 1-800-328-2883
3M 1995
1
Model 9600 Overhead Projector
This page intentionally left blank
Illustrated Parts Breakdown
3M 1995
2
Model 9600 Overhead Projector
Table of Contents
Section No. Title Page
0 Overview 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1 Open Triplet Head Assembly (with optional Flip-in Magnifier) 5 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 Arm and Focus Assembly 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 Folding Post Assembly 9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 Top Cover and Travel Cover 11 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 FXL Base Assembly 13 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 Frame Assembly 15 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 Cooling Fan 17 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 FXL Dual Lamp Housing 19 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 Lampchanger and Hi/Lo Lamp Control Module 21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 Wire Jumpers 22 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix A Specifications 23 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT NOTICE
Illustrated Parts Breakdown
3M reserves the right to sell or furnish NEW OR RECONDITIONED PARTS.
New and reconditioned parts are covered by the same 3M new parts limited warranty.
3M 1995
7-3
Model 9600 Overhead Projector
This page intentionally left blank
Illustrated Parts Breakdown
3M 1995
7-4
Model 9600 Overhead Projector
Lampchanger and
HI/LO Control Module
(See Section 9)
Illustrated Parts Breakdown
Section 0
OVERVIEW
Open Triplet Head Assembly
(See Section 1)
Arm and Focus Assembly
(See Section 2)
Travel Cover
(See Section 4)
FXL Dual Lamp Housing
(See Section 8)
Frame Assembly
(See Section 6)
Top Cover
(See Section 4)
Folding Post Assembly
(See Section 3)
FXL Base Assembly
(See Section 5)
3M 1995
Cooling Fan
(See Section 7)
7-5
Model 9600 Overhead Projector
OPEN TRIPLET HEAD ASSEMBLY
Illustrated Parts Breakdown
Section 1
6
7
8
5
9
10
4
11
3
2
1
24
6
1
2
13
14
15
3M 1995
23
22
11
Finished Goods Kit
16
17
18
19
20
21
7-6
Model 9600 Overhead Projector
Section 1
OPEN TRIPLET HEAD ASSEMBLY
Item
No. Part Number Description Qty
1 78-8064-1833-7 LENS, Triplet, 340 mm 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2 26-1002-4967-6 SCREW, Plastite, 4-20x3/8, Bzn 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 78-8003-9713-1 WASHER, Wave 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 26-1002-4948-6 SCREW, Plastite, 6-19x5/16, Zn 4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5 78-8095-8356-6 HEAD MIRROR ASSEMBLY 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
6 26-1002-4948-6 SCREW, Plastite, 6-19 X 5/16 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7 78-8095-8250-1 COVER, Head 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8 78-8095-8279-0 HEAT SHIELD, Corner 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9 26-1002-4972-6 SCREW, Plastite, 8/16 X 3/8 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10 12-7991-1737-4 WASHER, Plain, #8 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11 26-1002-4969-2 SCREW, Plastite, 6–19 X 3/8 (See Note) 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
12 78-8095-8242-8 MIRROR/LENS MOUNT 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
13 78-8095-8314-5 PLUG, Head 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
14 78-8095-8277-4 BUTTON, Head 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15 26-1009-9465-1 SPRING, Compression 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16 78-8095-8241-0 BASE PLATE, Head 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17 78-8095-8271-7 PIVOT POST, Magnifier (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
18 78-8095-8270-9 LENS RETAINER, Magnifier (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19 78-8097-3522-4 LENS, Flip–in Magnifer (Coated) (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
20 78-8095-8346-7 BRACKET, Lens Magnifier (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
21 78-8097-3599-2 CAP, Flip–in Magnifier (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22 26-1009-9689-6 WASHER, Spring (See Note) 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
23 78-8095-8278-2 LATCH, Head 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24 78-8095-8274-1 HEAT SHIELD 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Illustrated Parts Breakdown
1. Part of Finished Goods Kit HA5706.
3M 1995
Note
7-7