Page 1
The heat is on.
Protect your workers.
When working in hot and humid environments, nding
both reliable and comfortable respiratory protection is key to
helping keep workers safe. With 3M disposable respirators
there’s a solution: 3M
™
Cool Flow™ Valve technology.
3M™ Cool Flow™ Valve
Find Quality Products Online at: sales@GlobalTestSupply.com
www.GlobalTestSupply.com
Page 2
Cool comfort starts
with cool breathing.
3M disposable and reusable respirators with the 3M™ Cool Flow™ Valve
are designed to maximize breathing comfort and exhalation. By helping
™
to release the user’s hot, humid exhaled breath quickly, the 3M
™
Cool Flow
Valve helps to reduce heat and moisture build-up inside
the facepiece. Additionally, the valve cover helps direct exhaled air
downward and away from the face. When you work in hot, humid
and physically demanding environments, a little more comfort makes
a dierence.
Beat the heat with a cooler solution.
On average, disposable respirators with a 3M™ Cool Flow™ Valve are up to
7.5 degrees cooler inside the facepiece than similar models without the valve.*
See how 3M™ Cool Flow™ Valve technology can help keep your workers
more comfortable.
* Testing conducted in a 3M laboratory with the 8510 unvalved and 8511 with Cool Flow Valve. Testing protocol, data generation
and conclusions were reviewed and approved by an expert from the University of Minnesota. The testing performed by 3M is not
a part of the testing and certication conducted by NIOSH.
Inhalation with a 3M™ Cool Flow™ Valve
▲
Inhalation: As the wearer
inhales, air is pulled through
the respirator, and surface
temperature decreases.
Additionally, the 3M
™
Cool Flow
Valve’s plastic cover retains
some of the inhaled heat.
Exhalation with a 3M
▲
Exhalation: As the wearer exhales,
the respirator is lled with warm,
moist air. The exhaled air exits through
™
the 3M
media. This is ideal for long periods
™
Cool Flow™ Valve and lter
of wear, especially where conditions
are hot and humid, or when physically
demanding work causes heavy
breathing.
™
Cool Flow™ Valve
Heat has no boundaries
3M™ Cool Flow™ Valve technology is
available on numerous 3M disposable
and reusable respirators, providing
a cooler solution to most working
environments.
Standard N95
3M™ Particulate Respirator 8210V N95
™
3M
Particulate Respirator 8211 N95
™
Particulate Respirator 8511 N95
3M
™
Aura™ Particulate Respirator 9211+ N95
3M
Welding N95
3M™ Particulate Welding Respirator 8515 N95
™
3M
Particulate Welding Respirator 8212 N95
™
3M
Particulate Welding Respirator 8214 N95
™
Particulate Welding Respirator 8512 N95
3M
™
3M
Particulate Welding Respirator 8514 N95
100 Class
3M™ Particulate Respirator 8293 P100
™
3M
Particulate Respirator 8233 N100
For a full listing of all 3M™ Cool Flow™ Valve technology
options, contact 3M or visit 3M.com/CoolFlow.
These respirators help protect against certain particles. Misuse may result in sickness
or death. For proper use, see supervisor or User Instructions, or call 3M PSD Technical
Service in USA at 1-800-243-4630 and in Canada at 1-800-267-4414.
For more information
Personal Safety Division
3M Center, Building 235-2W-70
St. Paul, MN 55144-1000
Find Quality Products Online at: sales@GlobalTestSupply.com
In the U.S ., contact:
Technical Service: 1-800-243-4630
Customer Service: 1-800-328-1667
3M.com/WorkerSafety.com
www.GlobalTestSupply.com
In Canada, contact:
Technical Service: 1-800-267-4414
Customer Service: 1-800-364-3577
WARNING
© 3M 2016. All rights reserved.
3M is a trademark of 3M Company.
Cool Flow is a trademark of 3M Company.
Loading...