3M Pak 100 Polarized Boardmount Socket
.100″×.100″ Centerbump Polarization with Straight Solder Tails 8500 Series
S Centerbump polarization
S Mates with low profile shrouded headers
S Part number on each piece
S Optional keying plug
S UL 94V--0 rated polyester body
S Board retention feature
TS-0413-08
Date Modified:May 30, 2003
Sheet 1 of 2
Physical
Flammability: UL 94V-0
Underplating and U-Slot: 2 µm[79µ″ ] Nickel — QQ-N-290, Class 2
Wiping Area: 0.3 µm[12µ″ ] Gold — MIL-G-45204, Type II, Grade C
Electrical
Current Rating: 1A
Insulation Resistance: >1× 10
Withstanding Voltage: 1000 Vrmsat Sea Level
Environmental
Insulation
Material: Glass Filled Polyester (PBT)
Color: Gray
Contact
Material: Copper Alloy
Plating
Solder Tails: Tin Lead — MIL-P-81728
Marking: 3M Logo, Part Identification Number and Orientation Triangle
9
Ω at 500 Vdc
Temperature Rating: -- 5 5 °C to 105°C
UL File No.: E68080
3
InterconnectSolutions
http://www.3M.com/interconnects/
3M is a trademarkof3MCompany.
For technical,sales or ordering information call
800-225-5373
3M Pak 100 Polarized Boardmount Socket
.100″×.100″ Centerbump Polarization with Straight Solder Tails 8500 Series
6.1
[.24]
2.54 Ref
[ .100 ]
Dual Polarization
3.4
[.13]
2.54 ± .076
[ .100 ]
A
Position 2
85XX
2.54 Typ
[ .100 ]
1.0
Centerbump (Standard)
[.04]
Military:
Slots
0.81
[ .032 ]
SeeNote2
3.6
[.14]
SeeNote1
Triangle
Indicates
Position 1
0.65
[ .026 ]
2.54
[ .100 ]
Position 1
Contact
Quantity
10 17.3[.68]
16 25.9[.98]
20 30.0 [ 1.18]
26 37.6 [ 1.48]
34 47.7 [ 1.88]
40 55.4 [ 2.18]
50 68.1 [ 2.68]
60 80.8 [ 3.18]
64 85.8 [ 3.38]
2.54 Ref
[ .100 ]
2.8
[.11]
0.62
[ .024 ]
0.32
[ .013 ]
Dimension
A
10.8
[ .425 ]
∅1.0 ± .076 Typ
[ .039 ]
2.54 ± .076
[ .100 ]
Recommended Mounting Hole Pattern
(Shown for TopSide of PC Board)
0.81
[ .032 ]
Notes:
1. This polarizing groove is non-existent on the 10 position version.
2. The contact soldertail is designed to retain the connector on the PC board during
flow soldering operations.
3. Recommended to be mated to the .100” x .100” low profile header and the Plug
Connector 4600 Series without ejector latches.
Ordering Information
Sockets
85XX-4500JL
Contact Quantity:
See Table
343
6.1
[.24]
0.66
[ .026 ]
5
1.30
[ .051 ]
3435-0
Keying
(Optional: Order Separately)
Plug
Breakaway
Tab
[Inch]
Tolerance Unless Noted
mm
[ ] Dimensions for
Reference only
mm
.000.00.0
± .15± .3
TS-0413-08
Sheet 2 of 2
3
InterconnectSolutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
© 3M 2003
3
Electronic and Interconnect Solutions Division
6801 River Place Blvd.
Austin, TX 78726-9000
www.3M.com/eisd
Important Notice
All statements, technical information, and recommendations related
to 3M’s products are based on information believed to be reliable,
but the accuracy or completeness is not guaranteed. Before using
this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability
associated with such use. Any statements related to the product
which are not contained in 3M’s current publications, or any
contrary statements contained on your purchase order shall have
no force or effect unless expressly agreed upon, in writing, by an
authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture
for a period of 1 year from the date of purchase. 3M MAKES NO
OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR
A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at
3M’s option, to replace or repair the 3M product or refund the
purchase price of the 3M product. Except where prohibited by
law, 3M will not be liable for any loss or damage arising from
this 3M product, whether direct, indirect, special, incidental or
consequential regardless of the legal theory asserted.
Loading...