3M 6410, 6420, 7410, 8410, 6412 Owner's Manual
...
SelfCheck™ System
V-Series, R-Series, and BCS
Owners Manual
3M Security Systems Division
3M Center, Building 225-4N-14
St. Paul, Minnesota 55144-1000
78-8129-2528-3 Rev 1
© 2006 3M. All rights reserved.
3M is a trademark of 3M.
3M™ SelfCheck System V-Series, R-Series, and BCS Owners Manual
78-8129-2528-3 Rev 1
Table of Contents
Safety information ............................................................................................... 1
Intended use...............................................................................................................................1
Safety information for the V-Series Models 6410, 6420, and 7410 .......................................3
Safety information for the V-Series Tabletop Models 6412, 6422, 7412, and 7422.............4
Safety information for the R-Series Model 8410.....................................................................5
Safety information for the BCS Model 9410............................................................................6
V-Series label locations ............................................................................................................7
V-Series Tabletop Unit label locations....................................................................................8
R-Series label locations............................................................................................................9
BCS label locations .................................................................................................................10
Regulatory compliance...................................................................................... 11
EMC compliance USA and Canada........................................................................................11
Industry Canada radio frequency rules and regulations.....................................................11
EMC compliance Europe.........................................................................................................11
Australia....................................................................................................................................11
Japan.........................................................................................................................................11
Overview ............................................................................................................12
V-Series specifications ...........................................................................................................13
V-Series Tabletop Unit specifications...................................................................................14
R-Series specifications...........................................................................................................15
BCS Model 9410 specifications..............................................................................................16
Components.............................................................................................................................17
V-Series .....................................................................................................................................17
V-Series Tabletop Units.............................................................................................................17
R-Series.....................................................................................................................................18
BCS Model 9410........................................................................................................................18
Color touch-screen monitor .......................................................................................................19
Magnetic card reader.................................................................................................................19
Barcode scanner........................................................................................................................19
Smart card reader......................................................................................................................19
Receipt printer ...........................................................................................................................19
V-cradle......................................................................................................................................19
RFID reader pad ........................................................................................................................19
Interconnect box ........................................................................................................................20
V-coil driver box .........................................................................................................................20
Appliance coupler ......................................................................................................................20
Computer ...................................................................................................................................20
Communications......................................................................................................................21
Barcode formats ......................................................................................................................21
Touch screen monitor controls ......................................................................... 22
Safety information
!
!
!
Read, understand, and follow all safety information contained in these instructions prior to installation and use of the 3M™ SelfCheck™ System V-Series Model
6410, 6420, and 7410, the 3M SelfCheck System V-Series Tabletop Models 6412,
6422, 7412, and 7422, the 3M SelfCheck System R-Series Model 8410, and 3M
SelfCheck System BCS Model 9410. Retain these instructions for future reference.
Intended use
The 3M SelfCheck System V-Series Model 6410, 6420, and 7410, 3M SelfCheck System
V-Series Tabletop Models 6412, 6422, 7412, and 7422, 3M SelfCheck System R-Series
Model 8410, and 3M SelfCheck System BCS Model 9410 are intended for use by library
patrons in checking out books with minimal assistance by library staff.
R-Series models can
customer. The V-Series Tabletop Models 6412, 6422, 7412, and 7422 and the BCS Model
9410 is intended for use on a desktop provided by the customer.
These systems must be installed as specified in their respective site planning
guides and field service handbooks. They are intended for use in an indoor
library environment and have not been evaluated for other uses or locations.
be installed into a desk unit from 3M or into furniture provided by the
The V-Series and
DANGER:
WARNING:
CAUTION:
CAUTION:
EXPLANATION OF SIGNAL WORD CONSEQUENCES
Indicates a potentially hazardous situation, which, if not avoided,
will result in death or serious injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided,
may result in minor or moderate injury and/or property damage.
Indicates a potentially hazardous situation, which, if not avoided,
may result in property damage.
1
EXPLANATION OF PRODUCT SAFETY LABEL SYMBOLS
Attention: Read accompanying
documentation
DANGER
High voltage.
Power must be
disconnected
before servicing.
Disconnect power before servicing. Unit
contains high voltage electrical circuits th at
must be discharged and checked for voltage
prior to servicing. Service should be pe rformed
only by 3M factory trained service personnel.
Risk of electric shock
Display Unit: Mercury disposal
hazard
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
0.95 mW at 630-670 nm
CLASS 2 LASER PRODUCT
Laser Scanner: Laser exposure
2
Safety information for the V-Series Models 6410, 6420, and 7410
!
!
WARNING
To reduce the risk associated with fire due to modification or incorrect
installation of system components or the use of non-approved replacement
components:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Use approved system components installed by 3M service personnel only.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
To reduce the risk associated with hazardous voltage due to a user attempting
to service a component, incorrect installation of system components, or use of
the system when damage has occurred:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Install system components into desk or enclosure according to instructions and
specifications given in the appropriate site planning guide.
Do not use the V-cradle, coil driver box, interconnect box, appliance coupler, or
computer if any cases or power cords are damaged.
CAUTION
To reduce the risk associated with environmental contamination due to the
incorrect disposal of the lithium battery in the PC, mercury in the monitor/
display, and/or any circuitry that contains lead in the solder:
At the end of service life, dispose of the V-cradle, coil driver box, interconnect box,
appliance coupler, computer, monitor, and laser scanner in accordance with
federal, state, and local requirements.
To reduce the risk associated with exposure to laser light due to a person
looking into the laser scanner:
Do not look directly into laser scanner device;
At the end of service life, dispose of laser scanner in accordance with federal,
state, and local requirements.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following
statement for products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
3
Safety information for the V-Series Tabletop Models 6412, 6422,
!
!
7412, and 7422
WARNING
To reduce the risk associated with fire due to a user or installer attempting to service the SelfCheck
unit:
• Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair;
• Use approved replacement components, installed by 3M Service personnel only.
To reduce the risk associated with hazardous voltage due to a user or installer attempting to service
the SelfCheck unit or use of the system when damage has occurred to power cord:
• Do not attempt to modify or repair — no user serviceable parts — contact 3M Service for repair;
• Use approved replacement components, installed by 3M Service personnel only;
• Do not use the SelfCheck Tabletop unit if the power cord is damaged — contact 3M Service for
repair.
To reduce the risk associated with tipping over of the Selfcheck Tabletop unit due to placement on
an unsuitable desk or table:
• Insure that the furniture onto which the Selfcheck is placed is strong enough and provides a low slip
surface to safely hold the unit to prevent tipping or falling;
• Install SelfCheck in accordance with instructions and specifications given in the SelfCheck Tabletop
Site Planning Guide.
To reduce the risk associated with back strain due to the heavy weight of the system:
• Follow safe lifting procedures.
CAUTION
To reduce the risk associated with environmental contamination due to the incorrect disposal of the
lithium battery in PC or mercury in monitor/display:
• At the end of service life, dispose of Selfcheck unit and any accessories in accordance with federal,
state and local requirements.
To reduce the risk associated with exposure to laser light due to a person looking into the laser
scanner, or incorrect disposal of the laser scanner:
• Do not look directly into laser scanner device;
• At the end of service life, dispose of laser scanner in accordance with federal, state and local
requirements.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following statement for
products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than those specified
herein may result in hazardous laser light exposure.
4
Safety information for the R-Series Model 8410
!
!
WARNING
To reduce the risk associated with fire due to modification or incorrect
installation of system components or the use of non-approved replacement
components:
Do not attempt to modify or repair—no user serviceable parts—contact 3M Service
for repair.
Use approved system components installed by 3M service personnel only.
Install system components into desk or enclosure according to instructions and
specifications given in the Model 8410 Site Planning Guide.
To reduce the risk associated with hazardous voltage due to a user attempting
to service a component, incorrect installation of system components, or use of
the system when damage has occurred:
Do not attempt to modify or repair—no user serviceable parts—contact 3M
Service for repair.
Install system components into desk or enclosure according to instructions and
specifications given in the Model 8410 Site Planning Guide.
Do not use the interconnect box, appliance coupler, or computer if any cases or
power cords are damaged.
CAUTION
To reduce the risk associated with environmental contamination due to the
incorrect disposal of the lithium battery in PC, mercury in monitor/display,
and/or any circuitry that contains lead in the solder:
At the end of service life, dispose of interconnect box, appliance coupler, PC,
monitor, and laser scanner in accordance with federal, state and local
requirements.
To reduce the risk associated with exposure to laser light due to a person
looking into the laser scanner:
Do not look directly into laser scanner device.
At the end of service life, dispose of laser scanner in accordance with federal,
state, and local requirements.
IMPORTANT NOTE
The Code of Federal Regulations (CFR) 21CFR1040.10 requires the following
statement for products containing lasers:
Caution—use of controls or adjustments or performance of procedures other than
those specified herein may result in hazardous laser light exposure.
5
Loading...