3M 7387 Data Sheet

Splittable Flying Splice Tape 7387
August 2016
Supersedes: NEW
paper liner with liner score for easy manual application.
after splicing.
Physical Properties
Physical Properties
Product Description
Key Features
A splittable tape construction designed for straight-line flying splices, furnished with aggressive adhesives on both sides and a coated
designed for straight-line flying splices for a variety of film substrates such as polyethylene, cast polypropylene & aluminium foil.
designed so that no fibres are present after splitting, thereby preventing contamination of the central impression drum and removing the need for costly cleaning to remove fiber residues
Adhesive Type
Splicing side
Adhesive Type
Reel side
Tape Colour
Rubber adhesive
Acrylic adhesive
White (splicing side)
White (reel side)
Blue elliptic pattern inside
Carrier Splicing side: Paper
Reel side: Paper
Thickness (ASTM D-3652)
Tape Liner
Total
Splittable Layer Fiber-free cleavable layer
Release Liner Coated easy-release paper
Before splitting
0.281 mm
0.056 mm
0.337 mm
Repulpability Construction is not repulpable
Bonding Strength Designed for high affinity to film substrates
After splitting Splice side 0.117
mm Reel side 0.118 mm
Splittable Flying Splice Tape 7387
without the protective liner.
Address correspondence to: 3M
3M is a trademark of the 3M Company.
August 2016
Storage & Shelf Life
For Additional Information
Important Notice
Store at 16 °C – 27 °C and 40 – 60 % Relative Humidity in its original carton.
The product can be stored up to 12 months after production.
It is recommended to remove the protective liner just prior to splicing, rather than leaving film rolls with prepared splice patterns in storage
To request additional product information or to arrange for sales assistance, please call your local sales representative.
All statements, technical information and recommendations contained in this document are based upon tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect the use and performance of a 3M product in a particular application, including the conditions under which the product is used and the time and environmental conditions in which the product is expected to perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the user’s method or application. All questions of liability relating to this product are governed by the terms of the sale subject, where applicable, to the prevailing law.
Values presented have been determined by standard test methods and are average values not to be used for specification purposes. Our recommendations on the use of our products are based on tests believed to be reliable but we would ask that you conduct your own tests to determine their suitability for your applications.
This is because 3M cannot accept any responsibility or liability direct or consequential for loss or damage caused as a result of our recommendations.
Splittable Flying Splice Tape 7387
3M Bulgaria
Slovenia
3M (East) AG Representation
3M Romania
August 2016
Mladost 4 Business Park, bl.4, 2nd floor S o f i a 17 6 6 Bulgaria
3M Česko, spol. s r. o.
V Parku 2343/24 148 00 - Praha 4 Czech Republic
3M East AG Branch Office Serbia
Airport City Omladinskih brigada 90B 110 7 0 Belgrade Serbia
3M (East) AG Branch Office Croatia
Avenija Većeslava Holjevca 40 10010 Zagreb Croatia
3M (East) AG Branch Office Slovenia
Cesta v Gorice 8 1000 Ljubljana
Office Tirane
Rruga Sami Frasheri Pallati i Ri Perxhola Kati 2 Ap2 1000 Albania
3M Hellas MEPE
20 Kifissias Ave. 151 25 Maroussi Athens Greece
3M Hungária Kft
Neumann János u. 1/E. 1117 B u d a p e s t Hungary
3M Israel
91 Medinat Hayehudim St. Herzliya
Israel
3M Poland Sp. z o.o.
Aleja Katowicka 117 Kajetany 05-830 Nadarzyn Poland
Bucharest Business Park 12 Menuetului St. Building D, District 1 013713 Bucharest Romania
3M Sanayi ve Ticaret A.Ş.
Barbaros Mah., Mor Sümbül Sok. No:7/3F, 27-51, Nidakule Ataşehir Güney 34746 Atasehir, Istanbul Turkey
3M Slovensko s.r.o.
Polus Tower 2 Vajnorská 142 Bratislava 83104 Slovakia
Loading...