3M 2515 User Manual
3
Flat Back Paper Masking Tape
251 5
Product Description
3M™ Flat Back Paper Masking Tape 2515 can be used for splicing, bundling,
holding, fastening, tabbing and packaging applications.
Technical Data November, 2005
ASTM Test Method
Adhesion to Steel: 55 oz./in. width (60 N/100 mm) D-3330
Tensile Strength: 36 lbs./in. width (630 N/100 mm) D-3759
Elongation at Break: 3% D-3759
Tape Thickness: 6.7 mils (0.17 mm) D-3652
Temperature Use Range: Up to 200°F (93°C)
Product Construction
Backing Adhesive Color Standard Roll Length
Unbleached Kraft Paper Rubber Tan 55 meters (60 yards)
Features
• Good backing strength and is resistant to moist conditions.
• Can be machine dispensed.
• Lower unwind tension.
• Hand tearable.
Typical Physical
Properties
Note: The following technical information and data should be considered repr esentati ve
or typical only and should not be used for specification purposes.
Application Ideas
• Can be used on many grades of brown paper and paperboards for general splicing
applications.
• Ideal for bundling, holding, tabbing and packaging applications where paper tapes
are preferred.
3M™Flat Back Paper Masking Tape
25 1 5
Printed in U.S.A.
©3M 2005 70-0709-5377-6 (11/05)
Recycled Paper
40% pre-consumer
10% post-consumer
3
Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Av enue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial
Shelf Life
To obtain best performance, use this product within 12 months from date of
manufacture.
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Product Use
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED T O, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsib le for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusiv e remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
W arranty and
Limited Remedy
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
Limitation of Liability
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.
ISO 9001:2000
Storage
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.
Loading...