2000 Overhead Projector
Illustrated Parts Breakdown
3M Visual Systems Division
6801 River Place Boulevard
Austin, Texas78726-9000
Printed in U.S.A.
Copyright E 2000, 3M IPC. All Rights Reserved
78-6970-6942-1 Rev.D
2000 Overhead Projector
Illustrated Parts Breakdown
Revision History
Revision bars ( ) are not us ed in this update.
The original issue of this manual and subsequent revisions are identified as follows:
Issue date: 3/92
Revision Date Page(s) Changed Change
Original March 1992 All pages
November 1995 All pages
March 1997 All pages Globally introduce kit formatting on all pages.
M2000 Hardware Repair Kit (78-8062-1150-0)
appears in all illustrations.
2000 Cover, footers, page 7--17 Changed part number on page 7--17, item 1.
E 3MIPC 2000
i
2000 Overhead Projector
Illustrated Parts Breakdown
This page intentionally left blank
E 3MIPC 2000
ii
2000SeriesOverheadProjectors IPB--TableofContents
Introduction iii..................................................................
PartNumbers iii................................................................
LocatingandIdentifyingaPart iii.................................................
MachineIdentificationPlate 1....................................................
Section0OVERVIEW 2.......................................................
Section1MIRRORHOUSINGASSEMBLYSPAREPARTKIT 3.....................
Section2BASEANDBASETOPASSEMBLYSPAREPARTKIT 4...................
Section3LAMPASSEMBLY--EVWSPAREPARTKIT 5...........................
Section4LAMPMODULEASSEMBLY--FSYSPAREPARTKIT 6...................
Section5LAMPMODULEASSEMBLY--FSXSPAREPARTKIT 7...................
Section6TOPSHROUDASSEMBLY--EVWSPAREPARTKIT 8....................
Section7TOPSHROUDASSEMBLY--FSX/FSYSPAREPARTKIT 9.................
Section8PROJECTIONLENSASSEMBLY--SINGLETSPAREPARTKIT 10............
Section9PROJECTIONLENSASSEMBLY--TRIPLETSPAREPARTKIT 11............
Section10FOCUSMECHANISMASSEMBLYSPAREPARTKIT 12..................
Section11POSTANDPIVOTASSEMBLY--DOMESTICSPAREPARTKIT 13..........
Section12POSTANDPIVOTASSEMBLY--INTERNATIONALSPAREPARTKIT 14....
Section13RESISTORKIT 16...................................................
Section14STAGECOVERASSEMBLY--DOMESTICSPAREPARTKIT 17.............
Section15WIREJUMPERS 18..................................................
AppendixASPECIFICATIONS 21...............................................
E 3MIPC2000
2000 Overhead Projector
Illustrated Parts Breakdown
Introduction
This Illustrated Parts Breakdown (IPB) contains the
information necessary to locate and identify specific
parts of the 2000 Overhead Projector.
Part Numbers
All components available on a replacement basis are
listed withtheir 3M identification number. The parts
identification list opposite each illustration provides
the description adequate to identify components.
Locating and Identifying a Part
If physical appearance and general location of an item
are known:
1. Use the Overview illustration to determine which
section includes the item.
2. Refer to the section and locate the item on the
exploded view illustration.
S Dashed line box defines assembled kits.
S Common fasteners are only available by
ordering the hardware kit.
S Items outside the dashed line box are
available separately.
When ordering parts, include part identification
number, description, quantity and the following
information:
1. Product Name: The specific version number of
the projector.
2. Model Number/Alpha Code: The series number of
the projector followed by a three or four character
alpha code identifier. The Alpha Code indicates
the design level, specific product characteristics,
power cord or distribution specific to a country.
3. MFG Code: The MFG Code indicates the year
and quarter the projector was built. See example
below:
MFG Code
Letter Digit
L 1992 1 Jan -- Mar
M 1993 2 Apr -- Jun
A 1994 3 Jul -- Sep
C 1995 4 Oct -- Dec
D 1996 1 Jan -- Mar
E 1997 2 Apr -- Jun
The part identification numbers provided in this
manual are from the mostcurrent data available.
Make sure part identification numbers for your
component have not been amended by changes and
updates made to your 2000 Overhead Projector.
Machine Identification Plate
The Machine Identification Plate is located on the
inside wall of each projector and lists specific
information that is needed when calling for technical
assistance or ordering parts.
1
3M 2000 OVERHEAD PROJECTOR
MODEL 2000AG
3
C1
250
812856
250
82
5
3
2
4
4. Lamp: The electrical rating of the lamp.
5. S/N: The serial number assigned to thisprojector.
For part orders contact:
Dealers: Refer to Dealers Guide
3M Subsidiaries: Contact Export Operations
Retail Customers:
FAX: 1-800-852-3917
Telephone: 1-800-328-2883
Figure 1-1. Machine Identification Plate
E 3MIPC 2000
iii
3Mt Overhead Projector 2000
Quick Reference Parts Index
Description Part Number No. No.
FRESNEL LENS, Reflective, 10.5 S, 187.1mm, FL 78-8014-7442-6 14 2A . . . . . . . .. . .. . . . . . . .. . . . . . . . .
FRESNEL LENS, Reflective, 10.5 T, 187.1mm, FL 78-8014-6798-2 14 2B . . . . . . . .. . .. . . . . . . .. . . . . . . . .
FRESNEL LENS, Reflective, A4 S, 187.1mm, FL (For Japanese models also) 78-8014-7443-4 14 2C . . . . . . .
FRESNEL LENS, Reflective, A4 T, 187.1mm, FL 78-8014-6799-0 14 2D . . . . . . . .. . .. . . . . . . .. . .. . . . . . .
FRESNEL LENS, Reflective, A4, 187.1mm, FL, Japan 78-8065-8588-7 14 2F . . . . . . . .. . .. . . . . . . . . . . . . .
FUSE, 5 Amp, 5 X 20mm, Slow Acting (All except ABJ and ABJT) 26-1005-9599-5 2 6A . . . . . . . .. . .. . .. .
FUSE, 5 Amp, Japan (ABJ, ABJT) JJ-9960-0007-8 2 6B . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . . . .
LAMP, Projection, EVW, 82V 78-8014-6796-6 3 2 . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . . . . . . . . .
LAMP, Projection, FSY, 400W, 240V 78-8057-4163-0 4 2 . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . . .
LAMP, Projection, FSX, 400W, 230V 78-8057-4162-2 5 2 . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . . . . . . . . . .
POWER CORD, Australia 78-8057-4196-0 12 4A . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . . . . . . .
POWER CORD, Europe 78-8057-4170-5 12 4H . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . . . . . . . .
POWER CORD, Italy 78-8062-1368-8 12 4D . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . .. . ..
POWER CORD, Japan JY-2000-0001-8 12 4B . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . .
POWER CORD, South Africa 78-8057-4204-2 12 4E . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . . . . . . . .
POWER CORD, Switzerland 78-8057-4199-4 12 4G . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . . . . . . . .
POWER CORD, United Kingdom 78-8057-4191-1 12 4I . . .. . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . . . . . . . .
POWER CORD, United States, 10’ 78-8064-1536-6 11 4A . . . . . . . .. . .. . . . . . . .. . .. . . . . . . .. . .. . . .. . ..
POWER CORD, 3M Logo, 2 Blade With Ground, 10’ 78-8062-1378-7 11 4B . . . . . . . .. . .. . . . . . . .. . .. . ..
Illustrated Parts Breakdown
Section Item
E 3MIPC 2000
1
3Mt Overhead Projector 2000
Illustrated Parts Breakdown
Section 0
OVERVIEW
To Section One
Mirror Housing Assembly
Projection Lens and Focus
Mechanism
(See Sections 8, 9 and 10 )
Top Shroud Assembly
(See Sections 6 and 7 )
Stage Cover Assembly
(See Section 14 )
Lamp Assemblies
(See Sections 3, 4 and 5 )
Post Pivot Assembly
(See Sections 11 and 12 )
Base and Base Top Assembly
(See Section 2 )
E 3MIPC 2000
2
3Mt Overhead Projector 2000
MIRROR HOUSING ASSEMBLY SPARE PART KIT
Illustrated Parts Breakdown
Section 1
2
1
NOTE: Screws, Nuts, Bolts, Clips, and etc. are contained in Hardware Kit 78-8062-1150-0.
Section 1
MIRROR HOUSING ASSEMBLY SPARE PART KIT
Item No. Part Number Description Qty
1 78-8057-4230-7 MIRROR HOUSING ASSEMBLY Spare Part Kit 1 . . . .. . . . . . . . . . . .. . . . . .. . . . .. . . . . .. . . . .. .
2 JV-1890-0234-6 LABEL, Caution, Mirror, Japan 1 . . . .. . . . . . . . . . . .. . . . . .. . . . .. . . . . .. . . . .. . . . . .. . . . .. . . . . .
E 3MIPC 2000
3
3M Overhead Projector 2000
Section 2
BASE AND BASE TOP ASSEMBLY SPARE PART KIT
I llus tr a te d Pa r ts B re a kdo w n
9, 10
7
5
13
12
2
3
4
11
1
8
6
NOTE: Screws, Nuts, Bolts, Clips, and etc. are contained in Hardware Kit 78-8062-1150-0.
Section 2
BASE AND BASE TOP ASSEMBLY SPARE PART KIT
Item No. Part Number Description Qty
1 78-8062-1114-6 BASE AND BASE TOP ASSEMBLY Spare Part Kit 1 ......... ... ..........................
2 26-1002-4730-8 PLUG, Hole, Black 1 ......... ... .....................................................
3 78-8044-6919-1 TRANSFORMER, Japan (ABJ, ABJT) 1 ......... ... .....................................
4 26-1005-7653-2 HANDLE, Plastic, Molded 1 ......... ... ...............................................
........ ... ................................
5A 78-8057-4158-0 SWITCH, ON/OFF (S/N 860256 and below) 1
........ ... ................................
5B 78-8057-0959-5 SWITCH, ON/OFF (S/N 860257 and above) 1
6A 26-1005-9599-5 FUSE, 5 Amp, 5 X 20mm, Slow Acting (All except ABJ and ABJT) 1 ........ ... .............
6B JJ-9960-0007-8 FUSE, 5 Amp, Japan (ABJ, ABJT) 1 ........ ... ........................................
7A 26-1001-6189-7 FUSEHOLDER, Panel Mounted (All except ABJ and ABJT) 1 ........ ... ...................
7B 26-1001-6190-5 FUSEHOLDER, Panel Mounted (ABJ, ABJT) 1 ........ ... ...............................
8 78-8057-4166-3 FUSEHOLDER ASSEMBLY 1 ......... ... .............................................
9 78-8062-1362-1 LABEL, M2000T, Japan 1 ......... ... ................................................
10 78-8062-1361-3 LABEL, M2000S, Japan 1 ........ ... ................................................
11 78-8057-4186-1 LABEL, General Instructions 1 ........ ... .............................................
12 JV-0890-0183-6 LABEL, Caution, Japan 1 ........ ... .................................................
13 78-8057-4184-6 LABEL, Fuse Replacement, 5 Amp 1 ........ ... .......................................
E 3M IP C 2001
4