3M 1SF26-L1XX-00C-XXX User Manual

3M

™

Shrunk Delta Ribbon (SDR) Cable Assembly

.80 mm High Speed Digital Data Transmission, 26 position 1SF26-L1XX-00C-XXX

• Supports new AIA Industrial Camera Link®
Standard for new Mini C/L camera to new
frame grabber applications

• 11 shielded, twisted twinax pairs with four
drain wires

• Double overall shield with inner foil and
outer braid

• Rugged ribbon contact type

• Rugged thumbscrew retention

• EMI shielded overmolded junction shell

• R/A overmolded backshells eliminate bend
radius

• See regulatory information appendix (RIA)
for chemical compliance information

TS-2120-C

Date Modified: December 13, 2007

Sheet 1 of 4

Physical

Connector Contact Plating:

Electrical

Voltage Rating:

Insulation Resistance:

Withstanding Voltage:

Environmental

Temperature Rating:

Wiping Area:

Underplating:

Shell Options:

Color:

Material:

Cable:

Color:

Jacket Material:

Flammability:

Marking:

Current Rating:

30 μ″ [ 0.76 μm ] Min Gold
100 μ″ [ 2.55 μm ] Nickel

Parchment / Beige and Black
Overmolded option: Polyvinyl Chloride (PVC)

Parchment / Beige
Polyvinyl Chloride (PVC)
AWM VW-1
3M Logo

30 V

0.5 A

1 X 108 Ω min at 100 V
125 VAC RMS for 1 minute

0°C to +70°C

DC

UL File No.: E86982

3

Interconnect Solutions

http://www.3M.com/interconnects/

Camera Link is a certification mark of Automated Imaging Association

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M

™

Shrunk Delta Ribbon (SDR) Cable Assembly

.80 mm High Speed Digital Data Transmission, 26 position 1SF26-L1XX-00C-XXX

High Density
SDR plug
26 Position

LENGTH

Cable
(See pinout for cable construct i on)

2X Thumbscrew

2X Thumbscrew

Figure 1

Straight SDR to Straight SDR Cable Assembly

Option 20

.96

24.4

2X

High Density
SDR plug
26 Position

.87

22.0

.35

9.0

123456789

14 15 16 17 18 19 20 21 22 23 24 25 26

10 11 12 13

Figure 2
Straight SDR to Straight SDR Cable Assembly

.47

12.0

Note:

1. For length dimension, refer to the product ordering number.

3

Interconnect Solutions

http://www.3M.com/interconnects/

TS-2120-C
Sheet 2 of 4

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M

™

Shrunk Delta Ribbon (SDR) Cable Assembly

.80 mm High Speed Digital Data Transmission, 26 position 1SF26-L1XX-00C-XXX

High Density
Right Angle
SDR plu g
26 Position

.72

18.2

.66

16.7

2X Machine Screw

LENGTH

Cable
(See pinout for cable construct io n)

Figure 3

R/A SDR to SDR Cable Assembly

Options 36 & 37

.35

9.0

2X Thumbscrew

.96

24.4

12345678910111213

14 15 16 17 18 19 20 2122 23 24 25 26

High Density
SDR plug
26 Position

.87

22.0

.47

12.0

.37

9.4

.99

25.2

12345678910111213

14 15 16 17 18 19 20 21 2223 24 2526

Figure 5
Overmolded R/A SDR Connector
(36 option)

Figure 4
Overmolded R/A SDR Connector

14 151 617 18 19 20 21 22 23 24 25 26

12345678910111213

Figure 6
Overmolded R/A SDR Connector
(37 option)

TS-2120-C
Sheet 3 of 4

3

Interconnect Solutions

http://www.3M.com/interconnects/

3M is a trademark of 3M Company.

For technical, sales or ordering information call

800-225-5373

3M

™

Shrunk Delta Ribbon (SDR) Cable Assembly

.80 mm High Speed Digital Data Transmission, 26 position 1SF26-L1XX-00C-XXX

CN-1

Conn.

Pos.

2 XO- YO- YO- XO- 25

15 XO+ YO+ YO+ XO+ 12

3 X1- Y1- Y1- X1- 24

16 X1+ Y1+ Y1+ X1+ 11

4 X2- Y2- Y2- X2- 23

17 X2+ Y2+ Y2+ X2+ 10

5XC- Yclk- Yclk- XC- 22

18 XC+ Yclk+ Yclk+ XC+ 9

6 X3- Y3- Y3- X3- 21

19 X3+ Y3+ Y3+ X3+ 8

7 Ser TC+ 100 ohm 100 ohm Ser TC+ 20

20 Ser TC- Terminat ed Terminat ed Ser TC- 7

8 Ser TFG- ZO- ZO- Ser TFG- 19

21 Ser TFG+ ZO+ ZO+ Ser TFG+ 6

9 CC1- Z 1- Z1- CC1- 18
22 CC1+ Z1+ Z1+ CC1+ 5
10 CC2+ Z2- Z2- CC2+ 17
23 CC2- Z2+ Z2+ CC2- 4
11 CC3- Zclk- Zclk- CC3- 16
24 CC3+ Zclk+ Zclk+ CC3+ 3
12 CC4+ Z3- Z3- CC4+ 15
25 CC4- Z3+ Z3+ CC4- 2

1

14

13

26

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

INNER

SHIELD

Shell Shell

Base Configurat i on

Full / Medium configuration

Cable

TWI N AX 1

TWI N AX 2

TWI N AX 3

TWI N AX 4

TWI N AX 5

TWI N AX 6

TWI N AX 7

TWI N AX 8

TWI N AX 9

TWI N AX 10

TWI N AX 11

INNER

SHIELD

INNER

DRAIN WIRE

SHIELD

INNER

SHIELD

INNER

SHIELD

BRAID SHIELD

CN-2

Conn.

Pos.

INNER

SHIELD 1

INNER

SHIELD 14

INNER

SHIELD 13

INNER

SHIELD 26

Table 1
Cable Assembly Wiring Diagram

Ordering Information

20 = SDR straight to SDR straight backshell.
36 = The direction of the cable for the RA SDR connector dresses down with
respect to a horizontal board mount connector. The topology for the 36 option is
a straight overmolded SDR backshell to a R/A overmolded SDR backshell.
37 = The direction of the cable for the RA SDR connector dresses up with respect
to a horizontal board mount connector. The topology for the 37 option is a
straight overmolded SDR backshell to a R/A overmolded SDR backshell.

Notes:

1. For a cable length of less than 2m, the length tolerance is +50mm / -0mm

2. For a cable length of 2m or more, the length tolerance is +3% / -0% of cable length

3

Interconnect Solutions

http://www.3M.com/interconnects/

1SF26-L1XX-00C-XXX

Length :
100 = 1m
200 = 2m
500 = 5m
A00 = 10m

Refer to length dimension in figures 1 & 3
Reference notes 1 & 2 for cable length tolerance

For technical, sales or ordering information call

(RIA E1 & C1 apply)

TS-2120-C
Sheet 4 of 4

3M is a trademark of 3M Company.

800-225-5373

Regulatory Information Appendix

3M Electronic Solutions Division/Interconnect

EUROPE
Appendix E1: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.

This product is RoHS Compliant 2005/95/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E2: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.

This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E3: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix E4: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.

This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

RIA-2217B-c

Appendix E5: European Union RoHS

Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.

This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.

“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

CHINA
Appendix C1: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part does not contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.

Appendix C2: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.

RIA-2217B-c

Appendix C3: China RoHS

Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.

This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part does contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.

The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.

Important Notice

All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.

Warranty; Limited Remedy; Limited Liability.

This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase. 3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
the legal theory asserted.

3

3M Electronics
Interconnect Products

6801 River Place Blvd.
Austin, T X 78726-9000
U.S.A.
1-800-225-5373
www.3m.com/interconnects 3M is a trademark of 3M Company.

Please recycle. Printed in USA.
© 3M 2007. All rights reserved.
RIA-2217B-c