3M 1HF40 User Manual
3M
High Flow
The 3 M™ High Flow Filtration System uses 3M Innovation and 3M’ s extensive filtration
experience to enable flow rates up to 3 50 gpm in a single cartridge. The Compound Radial
Pleat design packs significantly higher usable surface areas per unit volume than can be
achieved with conventional pleated cartridge filters.
Features such as an ergonomically designed handle and a unique “twist-to-lock” seating
mechanism facilitate easy operation and maintenance of the filter system.
Materials of Construction
Each grade of the 3M High Flow Filter is manufactured from meltblown FDA
compliant polypropylene microfiber media, providing high particle removal efficiency
with broad chemical compatibility.
No adhesives, binders, surfactants, or lubricants are used in the manufacturing process.
3M™ High Flow Housing
The 3M High Flow Housing is specifically designed to deliver all of the system’s benefits in an economical, compact footprint. Housings are designed, manufactured, tested,
and code stamped in accordance with ASME Section VIII, Division 1, and are available
in either horizontal or vertical configurations. V essel construction is 31 6L stainless steel
with a glass-bead blasted finish.
Features & Benefi ts
High fl ow capability of up to 350 gpm per cartridge, see Graph 1.
■
Reduced fi lter usage – minimizes product loss, labor, disposal costs, operator exposure, and
downtime for fi lter change-out.
Compound Radial Pleat design.
■
High loading capacity for long life and lower cost fi ltration.
Compact design.
■
Smaller housing minimizes capital expense requirements.
■
Reduces system footprint.
Absolute rating.
■
Reproducible effl uent quality throughout the fi lter’s life.
Easy to use.
■
No special tools or hardware required for fi lter change-out – minimizes downtime.
■
“Twist-to-lock” seating mechanism provides positive seal.
■
Ergonomically designed handle – facilitates easy cartridge installation and removal.
FDA compliant/NSF 61 certifi ed.
■
Suitable for wide range of food and beverage and potable water applications.
™
Filtration System
Applications
■
Chemicals &
Petrochemicals Treatment
■
Food & Beverage
■
Industrial Processes
Graph 1: High Flow Housing
3.0
2.5
2.0
1.5
1.0
0.5
Differential Pressure (psid)
0 350150 200 250 30050 100
Graph 2: High Flow Cartridges
3.0
2.5
2.0
1.5
1.0
0.5
Differential Pressure (psid)
0 350150 200 250 30050 100
■
■
■
Flow (gpm)
Flow (gpm)
Industrial Water
Healthcare
Paint & Coatings
10 μm
15 μm
70, 40 & 25 μ m
1 μm
2 μm
5 μm
Vertical Housing
"
3M™ High Flow Housing Ordering Guide
Design Specifications
Maximum Allowable Working Pressure 150 psig
Maximum Forward Differential Pressure 50 psid @ 68˚F (3.4 bar @ 20˚C)
Recommended Change-out Pressure 35 psid @ 68˚F (2.4 bar @ 20˚C)
Housing Specifi cation
Model 1HF 40
Outside Diameter (inches) 85/
Number of Filter Elements 1 – 10" Element
Material 316L SS
Connection Size inches (ANSI flange) 4
Approximate Housing Weight (lbs) 350
3M™ High Flow Housing Ordering Guide
Number of
Filter Elements
1HF40 - 4 0 in ches
Model Size Configuration Housing Material Gasket Material
3M™ High Flow Filter Element Ordering Guide
8
283/8"
Outside
Diameter:
5
/8"
8
H - Horizontal
V - Vertical
71/2"
51/2"
121/2"
261/2"
120"
785/16"
C - 316 SS
Horizontal Housing: Side View
108"
64¼"
7½"
35"
12½"
Outside Diameter: 85/8"
Horizontal Housing: Top View
12"
Outside Diameter: 8
5
/8"
GA - Silicone
GB - Fluorocarbon
GC - EPR
GD - Nitrile
24½
Filter Designation Element Length Material
HF - High Flow 40 - 40 inches PP - Polypropylene
Absolute Removal
Rating (microns)
001 - 1 μm
002 - 2 μm
005 - 5 μm
010 - 10 μm
015 - 15 μm
025 - 25 μm
040 - 40 μm
070 - 70 μm
O-Ring
A - Silicone
B - Fluorocarbon
C - EPR
D - Nitrile
Packaging Options
(per box)
01 - 1-pack
Important Notice
The information described in this literature is accurate to the best of our knowledge. A variety of factors, however, can affect the performance of the Product(s) in a particular
application, some of which are uniquely within your knowledge and control. INFORMATION IS SUPPLIED UPON THE CONDITION THAT THE PERSONS RECEIVING THE
SAME WILL MAKE THEIR OWN DETERMINATION AS TO ITS SUITABILITY FOR THEIR USE. IN NO EVENT WILL 3M PURIFICATION INC. BE RESPONSIBLE FOR DAMAGES
OF ANY NATURE WHATSOEVER RESULTING FROM THE USE OF OR RELIANCE UPON INFORMATION.
It is your responsibility to determine if additional testing or information is required and if this product is fi t for a particular purpose and suitable in your specifi c application.
3M PURIFICATION INC. MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR OF ANY OTHER NATURE HEREUNDER WITH RESPECT TO INFORMATION OR THE PRODUCT TO WHICH
INFORMATION REFERS.
Limitation of Liability
3M Purifi cation Inc. will not be liable for any loss or damage arising from the use of the Product(s), whether direct, indirect, special, incidental, or consequential, regardless of
the legal theory asserted, including warranty, contract, negligence or strict liability. Some states do not allow the exclusion or limitation of incidental or consequential damages,
so the above limitation may not apply to you.
Your Local Distributor:
3M Purifi cation Inc.
400 Research Parkway
Meriden, CT 06450
U.S.A.
Phone (800) 243-6894
(203) 237-5541
Fax (203) 630-4530
www.3Mpurifi cation.com
Please recycle. Printed in U.S.A.
3M is a trademark of 3M Company.
© 3M 2011. All rights reserved.
70-0202-2738-8 REV 0511pb
Loading...