3M 1900 Technical Data

3

Value Duct Tape

1900

Product Description

3M™ Value Duct Tape 1900 is a conformable cloth duct tape made with polyethylene
film over cloth scrim and synthetic rubber adhesive. A good choice for non-critical
applications.

Technical Data April, 2007

ASTM Test Method

Adhesion to Steel: 58 oz./in. width (63.5 N/100 mm) D-3330

Tensile Strength: 16 lbs./in. width (280.2 N/100 mm) D-3759

Elongation at Break: 12% D-3759

Thickness: 5.8 mils (0.147 mm) D-3652

Temperature Use Range: Up to 200°F (93°C)

Product Construction

Standard Roll

Backing Adhesive Color Length Standard Width

Polyethylene over Synthetic Silver 50 yds. (45.7 m) 1.88 in. (48 mm)
cloth scrim rubber 2.83 in. (72 mm)

Features

• Polyethylene backing provides moisture resistance to tape applications.

• Synthetic rubber adhesive sticks well to many surfaces.

• Easy tear.

• Low profile.

• Individual roll wrap preserves integrity of the roll with less waste and easy
identification.

Typical Physical
Properties

Note: The following technical information and data should be considered representative

or typical only and should not be used for specification purposes.

Application Ideas

• Tool box tape for non-critical uses.

• Light duty sealing and holding.

• Marking.

3M™Value Duct Tape

1900

All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.

Product Use

Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.

Warranty and
Limited Remedy

Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.

Limitation of Liability

This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001:2000 standards.

ISO 9001:2000

3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2007 70-0711-0177-1 (4/07)

Recycled Paper
40% pre-consumer
10% post-consumer

3

Industrial Business
Industrial Adhesives and Tapes Division

3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (fax)
www.3M.com/industrial

Shelf Life

To obtain best performance, use this product within 12 months from date of
manufacture.

Storage

Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.