3M 11-71315-225-01 Datasheet

3M™ MicroTouch™ Display C1500SS

The Clear Choice for Optics, Reliability, and Ease of Integration

The 3M MicroTouch Display C1500SS (15”), a robust metal chassis display using 3M's industry-standard surface capacitive touch technology, provides a durable, optically-enhanced, and cost competitive alternative to 5-wire resistive displays used in industrial automation equipment and kiosk enclosures. The C1500SS display offers multiple mounting options to make integration easy and a variety of bezel options for sealing against liquids and other contaminants. A remote on-screen display module helps simplify any changes to the display image during installation or system maintenance.

The Clear Choice

The C1500SS display utilizes an all-glass surface capacitive touch sensor with the proprietary 3M

91.5% light transmission, 225-nit brightness (with touch screen), 500:1 contrast ratio and an ultra-fast 5.4 millisecond touch contact time.

ClearTekTM Hard Coat to deliver superior durability,

Multiple Mounting and Bezel Options

Multiple mounting and bezel options enable customers to meet their application needs at minimal cost. The C1500SS display offers a 75mm VESA pattern to provide arm mounting capability for industrial automation equipment. This minimizes the capital expenditure needed to upgrade equipment with touch. L-brackets (standard) or a VESA mounting bracket (optional) are available for installations requiring the touch display to be fully enclosed.

The C1500SS display offers three bezel options. The Slimline bezel is ﬂush with the edges of the display and is ideal for arm-mounted applications. The Contour Flanged bezel provides a lip to cover the air gap between the touch display and the enclosure opening. These two plastic bezels are ideal for solutions that require a NEMA 1 seal rating. The Industrial Flanged bezel, a metal gasketed bezel, enables kiosks or others enclosures to support NEMA 4X / IP66 seal ratings.

Feature

All-Glass, One-Layer Solution

Beneﬁt

• Provides 91.5% light transmission as compared to 80% for certain 5-wire resistive solutions

• Unaffected by UV light that can cause degradation of optics and yellowing of lm-based touch sensors over time

• No moving parts improves reliability

• Inherently free from the appearance of “Newton Rings”

Cost Effective

The C1500SS display uses an all-glass touch sensor with no moving parts, whereas 5-wire resistive solutions rely on compressing the top

lm layer against a conductive coating to recognize touch. Since force is

required to activate a resistive touch sensor it is susceptible to mechanical

wear and the appearance of “Newton Rings” which can potentially reduce

product life and optical performance.

The C1500SS touch display operates reliably in the presence of on-screen

contaminants and carries a 3-year “unlimited touches” warranty.

Recommended Applications

• Industrial Automation • Security Systems

• Self Service • Point-of-Information (POI)

• Hospitality • Home Automation

3M ClearTek Hard Coat

Total Touch Solution

• Proprietary coating is uniformly heat infused into the glass creating a non-permeable barrier for increased scratch and chemical resistance

• Low surface energy coating promotes smooth nger drag

• Unaffected by surface contaminants

• Unlike other touch display manufacturers that utilize 3rd party touch sensors, electronics, and or software in their

design, 3M owns, understands, and warranties the entire system for an unlimited amount of touches for 3 years

3M™ MicroTouch™ Display C1500SS Speciﬁcations

Functional Features

LCD Technology TFT, Active Matrix

Display Colors 16.2 million

Pixel Pitch .297 mm

Brightness 250 cd/m without Touch Screen

Brightness 225 cd/m with Touch Screen (max.)

Contrast Ratio 500:1 typical Video Response Time 12 ms typical

Touch Response Time 5.4 ms typical

Viewing Angle

Horizontal: +/-75 degrees typical

Vertical: +/-75 degrees typical

Control Type OSD

On Screen Display Controls Standard rear mounted controls. Optional remote unit.

(nit) typical

Slimline Bezel

(Included with standard product)

350.4 x 277.3 mm

13.80 x 10.92 inches

Optional Remote On-screen Display Module

(Part number: 30114)

Maximum Resolution 1024 x 768

Operating Environment 0 to +40 degrees C Relative Humidity, non-condensing 90%

Storage Environment -20 to +60 degrees C

Physical Features

Physical Dimensions 350.4 x 277.3 x 50 mm (Enclosure) (WxHxD) 13.80 x 10.92 x 1.96 inches

Display Area (WxH) 304.1 x 228.1 mm

11.9 x 8.9 inches

Video Cable Connector 15 Pin D-Sub

Power Supply Internal 12V DC Power Supply Also accepts 110/220V AC

Power Savings DPMS, VESA Compliant

Power Consumption <25 watts normal operation

Backlight Life 50,000 hrs. typical

Weight 4.2kg/9.2 lbs.

RoHS Compliant Yes

Agency Approvals FCC B, CE, UL/cUL

Mounting Options Set of 2, side or top/bottom mounting brackets, VESA 75 mm

Warranty 3 years. unlimited touches

(1) Brightness measured on a display with 3M (2) Measured at a contrast ratio of 5.

NOTE: Mechanical Drawings available at www.3m.com/touch

™

MicroTouch™ Sensor SCT3250 surface capacitive sensor.

Contour Flanged Bezel Option

(Part number: 29369)

377.8 x 301.8 mm

14.87 x 11.88 inches

Industrial Flanged Bezel Option

(Part number: 29368)

411.0 x 316.9 mm

16.18 x 12.48 inches

Standard Part Numbers

Part Number Description

11-71315-225-01 USB with Slimline Bezel

11-71315-227-01 Serial with Slimline Bezel

11-71315-225-03 USB with Contour Bezel

Optional Heavy Duty Mounting Bracket

(Part number: 30113)

3M Touch Systems

Subsidiary of 3M Company

501 Grifn Brook Park Drive Methuen, MA 01844 U.S.A.

1-888-659-1080

www.3M.com/touch

RoHS Directive compliant: In accordance with European Directive 2002/95/EC, “RoHS Directive compliant” means that the product or part does not contain any of the following substances in excess

of the following maximum concentration values in any homogeneous material, unless the substance is in an application that is exempt under RoHS: (a) 0.1% (by weight) for lead, mercury, hexavalent

chromium, polybrominated biphenyls or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this information represents 3M’s knowledge and

belief based on information provided by third party suppliers to 3M. (9/06)

IMPORTANT NOTICE TO PURCHASER: Specications are subject to change without notice. These 3M Touch Systems’ Products and software are warranted to meet their published specications from the date of shipment and for the period stated in the specication. 3M Touch Systems makes no additional warranties, express or implied, including but not limited to any implied warranties of merchantability or tness for a particular purpose. User is responsible for determining whether the 3M Touch Systems Products and software are t for User’s particular purpose and suitable for its method of production, including intellectual property liability for User’s application. If the Product, software or software media is proven not to have met 3M Touch Systems’ warranty, then 3M Touch Systems’ sole obligation and User’s and Purchaser’s exclusive remedy, will be, at 3M Touch Systems’ option, to repair or replace that Product quantity or software mediator to refund its purchase price. 3M Touch Systems has no obligation under 3M Touch Systems’ warranty for any Product, software or software media that has been modied or damaged through misuse, accident, neglect,

or subsequent manufacturing operations or assemblies by anyone other than 3M Touch Systems. 3M Touch Systems shall not be liable in any action against it in any way related to the Products or

software for any loss or damages, whether non-specied direct, indirect, special, incidental or consequential (including downtime, loss of prots or goodwill) regardless of the legal theory asserted. (7/02)