American Standard 1340.000 User Manual

Size:
27.17 Kb
Download
160mm (6-5/16) long 64mm (2-1/2) deep 5mm (3/16) height

GENERAL DESCRIPTION:

Vandal-resistantbrass body and cap. Replaceable valve cartridge.One-halfinch male NPSM shank with vandalresistant mounting and brass escutcheon plate (use is optional). Operating range from 20 to 125 psi. Adjustable flow cycle from 7 to 40 seconds (factory preset at a minimum of 10 seconds).Vandal-resistantspray end with 1.5 gpm flow control maintains flow below 0.25 gallons per cycle. Push button activator requires less than 5 lbs. of force to operate. Available with mixing valve andbuilt-inchecks or without mixing valve for use with cold or tempered water.

PRODUCT FEATURES:

Vandal-ResistantBrass Body, Cap, and Mounting:

Durable - Excellent in high use applications.

Automatic Shut-off: Stops water and energy waste. Ideal for public restrooms where uncontrolled water usage is costly.

Meets ADA Standard: Requires less than 5 lbs. of operating force to initiate flow per ANSI A117.1.

Single Handle Design: Eliminates the possibility of scalding which can occur with two handle designs - when the cold side turns off before the hot.

Adjustable Flow Cycle: Can be easily adjusted from 7 to 40 seconds.

Replaceable Valve Cartridge: Facilitates simple replacement.

Mixing: Provides tempered mixed water for faucet. Includes a field adjustable mixing valve withbuilt-inchecks andbuilt-incleanable strainer to protect valve from line debris (on applicable model).

COMMERCIAL

SINGLE CONTROL METERING FAUCET

MODEL NUMBER:

1340M.000 Vandal Resistant Metering Faucet with mixing valve.

Built-instrainer and checks. Escutcheon plate (use is optional).

1340M.000X Vandal Resistant Metering Faucet with mixing valve.

Built-instrainer and checks. Less escutcheon plate.

1340.000 Vandal Resistant Metering Faucet less mixing valve.

Single supply for cold or tempered water. Escutcheon plate (use is optional).

48mm (1-7/8)

111mm (4-3/8)

44mm

38mm

(1-3/4)

DIA.

(1-1/2)

 

30°

1/2-14

NPSM

THREAD

44mm

(1-3/4)

MAX

90mm

(3-9/16)

 

MIXING VALVE

 

WITH BUILT-IN

 

CHECKS AND

70mm

STRAINER

(2-3/4)

(ON APPLICABLE

 

MODEL)

38mm (1-1/2)

NOTE: Dimensions are shown for product installed less escutcheon.

Escutcheon is:

SUGGESTED SPECIFICATION

Single control metering faucet shall feature a vandal-resistantbrass body, cap and mounting with a replaceable valve cartridge. Shall also feature an adjustable flow cycle from 7 to 40 seconds. Shall also feature avandal-resistantspray end which maintains flow below the maximum 0.25 gallons per cycle required by ANSI A112.18.1M. Push button activator shall meet ANSI A117.1 Standard. Fitting shall be American Standard Model # 1340.____.____

CODES AND STANDARDS

These products meet or exceed the following codes and standards:

ANSI A117.1

ASME A112.18.1M

CSA B 125

COMMERCIAL

SINGLE CONTROL METERING FAUCET

FLOW VOLUME PER CYCLE*

 

0.30

Required maximum flow of 0.25 gal/cycle

 

0.25

GALLONS

0.20

 

 

 

 

0.15

 

 

 

 

0.10

 

 

 

 

 

 

 

 

 

 

0.05

 

 

 

 

 

0.00

20

40

60

80

 

 

 

 

 

I N L E T P R E S S U R E ( P S I )

*Cycle timed at 10 seconds.

 

 

Finish

 

 

Polished

Product

 

Chrome

Number

Description

002

1340M.000

Metering Faucet with mixing valve. Built-instrainer and checks. Optional escutcheon.

 

 

 

 

1340M.000X

Metering Faucet with mixing valve. Built-instrainer and checks. Less escutcheon.

 

 

 

 

1340.000

Metering Faucet. Optional escutcheon.

 

 

 

 

Meets the American Disabilities Act Guidelines and ANSI A117.1 Requirements for the physically challenged.