IMPORTANT!
READ CAREFULLY BEFORE USE.
KEEP THIS GUIDE FOR FUTURE REFERENCE.
Note: This guide is a reference for a series of products. Therefore some features or
options in this guide may not be available in your product.
Graphics in this book may differ slightly from the product due to differences in operating systems,
operating system versions, or if you installed updated firmware/software for your device. Every
effort has been made to ensure that the information in this manual is accurate.
Related Documentation
•Quick Start Guide
The Quick Start Guide shows how to connect the AMG1302/AMG1202-TSeries and access the
Web Configurator. It contains information on setting up your wireless network.
Parental Control ....................................................................................................................................191
5.2 The Connection Status Screen .........................................................................................................67
5.3 The System Info Screen ................................................................................ ... ... .... ... ... ... .................68
27.2 AMG1302/AMG1202-TSeries Access and Login ..........................................................................240
27.3 Internet Access .............................................................................................................................242
Appendix A Setting up Your Computer’s IP Address.......................................................................245
Appendix B IP Addresses and Subnetting.......................................................................................265
Appendix C Pop-up Windows, JavaScripts and Java Permissions.................................................273
Appendix D Wireless LANs..............................................................................................................281
Appendix E IPv6..............................................................................................................................295
Appendix F Services........................................................................................................................305
Appendix G Legal Information.........................................................................................................309
Index ..................................................................................................................................................313
12
AMG1302/AMG1202-TSeries User’s Guide
PART I
User’s Guide
13
14
1.1 Overview
The AMG1302/AMG1202-TSeries are ADSL2+ routers. By integrating DSL and NAT, you are
provided with ease of installation and high-speed, shared Internet access. The AMG1302/
AMG1202-TSeries are also a complete security solution with a robust firewall and content filtering.
Only use firmware for your AMG1302/AMG1202-TSeries’s specific model.
Refer to the label on the bottom of your AMG1302/AMG1202-TSeries.
Note: Not all models have all of the features shown in this User’s Guide.
CHAPTER 1
Introduction
1.2 Ways to Manage the AMG1302/AMG1202-TSeries
Use any of the following methods to manage the AMG1302/AMG1202-TSeries.
• Web Configurator. This is recommended for everyday management of the AMG1302/AMG1202TSeries using a (supported) web browser.
• Command Line Interface. Line commands are mostly used for troubleshooting by service
engineers.
• FTP for firmware upgrades and configuration backup/restore.
• TR-069. This is an auto-configuration server used to remotely configure your device.
1.3 Good Habits for Managing the AMG1302/AMG1202TSeries
Do the following things regularly to make the AMG1302/AMG1202-TSeries more secure and to
manage the AMG1302/AMG1202-TSeries more effectively.
• Change the password. Use a password that’s not easy to guess and that consists of different
types of characters, such as numbers and letters.
• Write down the password and put it in a safe place.
• Back up the configuration (and make sure you know how to restore it). Restoring an earlier
working configuration may be useful if the device becomes unstable or even crashes. If you
forget your password, you will have to reset the AMG1302/AMG1202-TSeries to its factory
default settings. If you backed up an earlier configuration file, you would not have to totally reconfigure the AMG1302/AMG1202-TSeries. You could simply restore your last configuration.
AMG1302/AMG1202-TSeries User’s Guide15
Chapter 1 Introduction
DSL
LANWAN
1.4 Applications for the AMG1302/AMG1202-TSeries
Here are some example uses for which the AMG1302/AMG1202-TSeries is well suited.
1.4.1 Internet Access
Your AMG1302/AMG1202-TSeries provides shared Internet access by connecting the DSL port to
the DSL or MODEM jack on a splitter or your telephone jack. Computers can connect to the
AMG1302/AMG1202-TSeries’s Ethernet ports (or wirelessly).
Figure 1 AMG1302/AMG1202-TSeries’s Router Features
You can also configure firewall and filtering feature on the AMG1302/AMG1202-TSeries for secure
Internet access. When the firewall is on, all incoming traffic from the Internet to your network is
blocked unless it is initiated from your network. This means that probes from the outside to your
network are not allowed, but you can safely browse the Internet and download files.
Use the filtering feature to block access to specific web sites or Internet applications such as MSN or
Yahoo Messenger. You can also configure IP/MAC filtering rules for incoming or outgoing traffic.
Use QoS to efficiently manage traffic on your network by giving priority to certain types of traffic
and/or to particular computers. For example, you could make sure that the AMG1302/AMG1202TSeries gives voice over Internet calls high priority, and/or limit bandwidth devoted to the boss’s
excessive file downloading.
1.4.2 Wireless Access
The ZyXEL Device is a wireless Access Point (AP) for IEEE 802.11b/g/n compliant clients, such as
notebook computers or PDAs and iPads. It allows them to connect to the Internet without having to
rely on inconvenient Ethernet cables. You can set up a wireless network with WPS (WiFi Protected
Setup) or manually add a client to your wireless network.
16
AMG1302/AMG1202-TSeries User’s Guide
Figure 2 Wireless Access Example
1.5 General Hardware Features
Figure 3 General Hardware Features
Chapter 1 Introduction
The following table describes the LEDs..
Table 1 LED Descriptions
LEDCOLORSTATUSDESCRIPTION
GreenOnThe AMG1302/AMG1202-TSeries is receiving power and ready for
(POWER)
RedOnThe AMG1302/AMG1202-TSeries detected an error while self-
Ethernet 1-4GreenOnThe AMG1302/AMG1202-TSeries has an Ethernet connection with
AMG1302/AMG1202-TSeries User’s Guide
use.
BlinkingThe AMG1302/AMG1202-TSeries is self-testing.
testing, or there is a device malfunction.
OffThe AMG1302/AMG1202-TSeries is not receiving power.
a device on the Local Area Network (LAN).
BlinkingThe AMG1302/AMG1202-TSeries is sending/receiving data to /
from the LAN.
OffThe AMG1302/AMG1202-TSeries does not have an Ethernet
connection with the LAN.
17
Chapter 1 Introduction
WPS
Table 1 LED Descriptions
LEDCOLORSTATUSDESCRIPTION
(WPS/WLAN)
(DSL)
(INTERNET)
GreenOnThe wireless network is activated.
BlinkingThe AMG1302/AMG1202-TSeries is communicating with other
wireless clients.
GreenBlinkingThe AMG1302/AMG1202-TSeries is setting up a WPS connection.
OffThe wireless network is not activated.
GreenOnThe DSL line is up.
BlinkingThe AMG1302/AMG1202-TSeries is initializing the DSL line.
OffThe DSL line is down.
GreenOnThe AMG1302/AMG1202-TSeries has an IP connection but no
traffic.
Your device has a WAN IP address (either static or assigned by a
DHCP server), PPP negotiation was successfully completed (if
used) and the DSL connection is up.
BlinkingThe AMG1302/AMG1202-TSeries is sending or receiving IP traffic.
RedOnThe AMG1302/AMG1202-TSeries attempted to make an IP
connection but failed. Possible causes are no response from a
DHCP server, no PPPoE response, PPPoE authentication failed.
OffThe AMG1302/AMG1202-TSeries does not have an IP connection.
1.6 Using the WPS Button
You can also use the WPS button to quickly set up a secure wireless connection between the
AMG1302/AMG1202-TSeries and a WPS-compatible client by adding one device at a time.
To activate WPS:
1Make sure the POWER LED is on and not blinking.
2Press the WPS button for 1-5 seconds and release it. See below for WPS button location.
3Press the WPS button on another WPS-enabled device within range of the AMG1302/AMG1202-
TSeries. The WPS LED should flash while the AMG1302/AMG1202-TSeries sets up a WPS
connection with the other wireless device.
4Once the connection is successfully made, the WPS LED shines green.
18
AMG1302/AMG1202-TSeries User’s Guide
Chapter 1 Introduction
1.7 The RESET Button
If you forget your password or cannot access the web configurator, you will need to use the RESET
button at the back of the device to reload the factory-default configuration file. This means that you
will lose all configurations that you had previously and the user name and password will be reset to
the default.
1.7.1 Using the Reset Button
1Make sure the POWER LED is on (not blinking).
2To set the device back to the factory default settings, press the RESET button for ten seconds or
until the POWER LED begins to blink and then release it. When the POWER LED begins to blink,
the defaults have been restored and the device restarts.
1.8 W ays to Manage the AMG1302/AMG1202-TSeries
Use any of the following methods to manage the AMG1302/AMG1202-TSeries.
• Web Configurator. This is recommended for everyday management of the AMG1302/AMG1202TSeries using a (supported) web browser.
• FTP for firmware upgrades and configuration backup/restore.
AMG1302/AMG1202-TSeries User’s Guide
19
Chapter 1 Introduction
20
AMG1302/AMG1202-TSeries User’s Guide
2.1 Overview
The web configurator is an HTML-based management interface that allows easy device setup and
management via Internet browser. Use Internet Explorer 6.0 and later versions, Mozilla Firefox 3
and later versions, or Safari 2.0 and later versions. The recommended screen resolution is 1024 by
768 pixels.
In order to use the web configurator, you need to allow:
• Web browser pop-up windows from your device. Web pop-up blocking is enabled by default in
Windows XP SP (Service Pack) 2.
• JavaScript (enabled by default).
• Java permissions (enabled by default).
CHAPTER 2
Introducing the Web Configurator
See Appendix C on page 273 if you need to make sure these functions are allowed in Internet
Explorer.
2.1.1 Accessing the Web Configurator
1Make sure your AMG1302/AMG1202-TSeries hardware is properly connected (refer to the Quick
Start Guide).
2Launch your web browser.
3Type "192.168.1.1" as the URL.
4A password screen displays. Type “admin” (default) as the username and “1234” as the password,
and click Login. If you have changed the password, enter your password and click Login. Figure 4 Password Screen
AMG1302/AMG1202-TSeries User’s Guide21
Chapter 2 Introdu cing the Web Configurator
Note: For security reasons, the AMG1302/AMG1202-TSeries automatically logs you out if
you do not use the web configurator for five minutes (default). If this happens, log
in again.
5The following screen displays if you have not yet changed your password. It is strongly
recommended you change the default password. Enter a new password, retype it to confirm and
click Apply; alternatively click Skip to proceed to the Connection Status screen if you do not want
to change the password now.
Figure 5 Change Password Screen
6The Connection Status screen appears.
Figure 6 Connection Status
7Click System Info to display the System Info screen, where you can view the AMG1302/
AMG1202-TSeries’s interface and system information.
22
AMG1302/AMG1202-TSeries User’s Guide
2.2 The Web Configurator Layout
A
B
C
Click Connection Status > System Info to show the following screen.
Figure 7 Web Configurator Layout Screen
Chapter 2 Introducing the Web Configurator
AMG1302/AMG1202-TSeries User’s Guide
23
Chapter 2 Introdu cing the Web Configurator
As illustrated above, the main screen is divided into these parts:
• A - title bar
• B - main window
• C - navigation panel
2.2.1 Title Bar
The title bar shows the following icon in the upper right corner.
Click this icon to log out of the web configurator.
24
AMG1302/AMG1202-TSeries User’s Guide
2.2.2 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
After you click System Info on the Connection Status screen, the System Info screen is
displayed. See Chapter 5 on page 68 for more information about the System Info screen.
If you click LAN Device on the System Info screen, the Connection Status screen appears. See
Chapter 5 on page 67 for more information about the Connection Status screen.
If you click Virtual Device on the System Info screen, a visual graphic appears, showing the
connection status of the AMG1302/AMG1202-TSeries’s ports. The connected ports are in color and
disconnected ports are gray.
2.2.3 Navigation Panel
Use the menu items on the navigation panel to open screens to configure AMG1302/AMG1202TSeries features. The following table describes each menu item.
Table 2 Navigation Panel Summary
LINKTABFUNCTION
Connection StatusThis screen shows the network status of the AMG1302/AMG1202-
Network Setting
BroadbandInternet
WirelessGeneralUse this screen to turn the wireless connection on or off, specify
Chapter 2 Introducing the Web Configurator
TSeries and computers/devices connected to it.
Use this screen to configure ISP parameters, WAN IP address
Connection
More ConnectionsUse this screen to configure additional WAN connections.
More APUse this screen to configure multiple BSSs on the AMG1302/
MAC
Authentication
WPSUse this screen to use WPS (Wi-Fi Protected Setup) to establish a
WDS
WMMUse this screen to enable or disable Wi-Fi MultiMedia (WMM).
SchedulingUse this screen to configure when the AMG1302/AMG1202-
AdvancedUse this screen to configure advanced wireless settings such as
assignment, DNS servers and other advanced properties.
the SSID(s) and configure the wireless LAN settings and WLAN
authentication/security settings.
AMG1202-TSeries.
Use this screen to block or allow wireless traffic from wireless
devices of certain SSIDs and MAC addresses to the AMG1302/
AMG1202-TSeries.
wireless connection.
Use this screen to set up Wireless Distribution System (WDS) links
to other access points.
TSeries enables or disables the wireless LAN.
output power.
AMG1302/AMG1202-TSeries User’s Guide
25
Chapter 2 Introdu cing the Web Configurator
Table 2 Navigation Panel Summary
LINKTABFUNCTION
Home
Networking
Static RouteStatic RouteUse this screen to view and set up static routes on the AMG1302/
QoSGeneralUse this screen to enable QoS and decide allowable bandwidth
NATGeneralUse this screen to activate/deactivate NAT.
Port BindingGeneralUse this screen to activate/deactivate port binding.
Dynamic DNSDynamic DNSUse this screen to allow a static hostname alias for a dynamic IP
Security
FilterIP/MAC Filter
FirewallGeneralUse this screen to activate/deactivate the firewall.
Parental ControlParental Control
LAN SetupUse this screen to configure LAN TCP/IP settings, and other
Static DHCP Use this screen to assign specific IP addresses to individual MAC
IP AliasUse this screen to partition your LAN interface into different logical
UPnPUse this screen to enable the UPnP function.
IPv6 LAN Setup
IPv6 Static RouteUse this screen to configure IPv6 static routes.
Queue
Class SetupUse this screen to set up classifiers to sort traffic into different
Game List
Port ForwardingUse this screen to make your localservers visible to the outside
DMZ
Port BindingUse this screen to configure and view port binding groups.
IPv6/MAC Filter
Default Action
Rules
Dos
advanced properties.
addresses.
networks.
Use this screen to configure the IPv6 settings on the AMG1302/
AMG1202-TSeries’s LAN interface.
AMG1202-TSeries.
using QoS.
Use this screen to configure QoS queue assignment.
flows and assign priority and define actions to be performed for a
classified traffic flow.
Use this screen to give priority to traffic for specific games.
world.
Use this screen to configure a default server which receives
packets from ports that are not specified in the Port Forwarding
screen.
address.
Use this screen to configure IPv4/MAC filtering rules for incoming
or outgoing traffic.
Use this screen to configure IPv6/MAC filtering rules for incoming
or outgoing traffic.
Use this screen to set the default action that the firewall takes on
packets that do not match any of the firewall rules.
Use this screen to view the configured firewall rules and add, edit
or remove a firewall rule.
Use this screen to set the thresholds that the AMG1302/
AMG1202-TSeries uses to determine when to start dropping
sessions that are not fully established (half-open sessions).
Use this screen to define time periods and days during which the
AMG1302/AMG1202-TSeries performs parental control and/or
block web sites with the specific URL.
26
AMG1302/AMG1202-TSeries User’s Guide
Chapter 2 Introducing the Web Configurator
Table 2 Navigation Panel Summary
LINKTABFUNCTION
CertificatesLocal CertificatesUse this screen to export self-signed certificates or certification
requests and import the AMG1302/AMG1202-TSeries’s CA-signed
certificates.
Trusted CAUse this screen to save CA certificates to the AMG1302/AMG1202-
System Monitor
LogLog
Traffic StatusWANUse this screen to view the status of all network traffic going
LANUse this screen to view the status of all network traffic going
NATUse this screen to view the status of NAT sessions on the
Maintenance
Users AccountUsers AccountUse this screen to configure the passwords your user accounts.
TR-069 ClientTR-069 Client
SystemSystemUse this screen to configure management inactivity time-out
TimeTime SettingUse this screen to change your AMG1302/AMG1202-TSeries’s time
Log SettingLog SettingUse this screen to select which logs and/or immediate alerts your
Firmware
Upgrade
Backup/RestoreBackup/RestoreUse this screen to backup and restore your device’s configuration
RebootRebootUse this screen to reboot the AMG1302/AMG1202-TSeries without
Remote MGMTWWW, Telnet, FTP,
DiagnosticPingUse this screen to test the connections to other devices.
Firmware Upgrade Use this screen to upload firmware to your device.
SNMP, DNS, ICMP,
SSH
DSL LineUse this screen to identify problems with the DSL connection.
TSeries.
Use this screen to view the logs for the level that you selected.
You can export or e-mail the logs.
through the WAN port of the AMG1302/AMG1202-TSeries.
through the LAN ports of the AMG1302/AMG1202-TSeries.
AMG1302/AMG1202-TSeries.
Use this screen to configure the AMG1302/AMG1202-TSeries to be
managed by an Auto Configuration Server (ACS).
setting.
and date.
device is to record. You can also set it to e-mail the logs to you.
(settings) or reset the factory default settings.
turning the power off.
Use this screen to enable specific traffic directions for specific
network service.
AMG1302/AMG1202-TSeries User’s Guide
27
Chapter 2 Introdu cing the Web Configurator
28
AMG1302/AMG1202-TSeries User’s Guide
CHAPTER 3
Internet / Wireless Setup Wizard
3.1 Overview
Use the wizard setup screens to configure your system for Internet access with the
information given to you by your ISP.
Note: See the advanced menu chapters for background information on these fields.
3.2 Internet / Wireless Wizard Setup
1After you enter the password to access the web configurator, click the Wizard icon () in
the top right corner of the web configurator to go to the Wizard.
2Click INTERNET/WIRELESS SETUP to configure the system for Internet access and
wireless connection.
AMG1302/AMG1202-TSeries User’s Guide29
Chapter 3 Internet / Wireless Setup Wizard
3Select your Time Zone from the drop-down menu, and click Next.
Figure 8 Wizard Welcome
Enter your Internet access information in the wizard screen exactly as your service
provider gave it to you. Leave the defaults in any fields for which you were not given
information.
4Configure the field and click Next to continue. See Section 3.2 on page 29 for wireless
connection wizard setup.
Figure 9 Internet Access Wizard Setup: IPoA Configuration
30
AMG1302/AMG1202-TSeries User’s Guide
Loading...
+ 130 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.