Zyxel P-2612HW-F1, P-2612HW specifications

Superior Dual WAN IAD for Smoothing

Next-generation Access Network Migration

ġ Dual WAN to Enrich ISP’s Feasibility on Logistics

ġ Ease of Wireless Network Installation with WPS, and

Time Scheduling for Energy Saving

ġ Auto Configuration and Provisioning via TR069, and TR104

ġ Effective Bandwidth Management to Enhance

Triple-play Application

ġ Robust Firewall Protection and IPSec VPN Security

Benefits

Dual WAN to Enrich ISP’s Feasibility on Logistics

When ISP migrates the service from ADSL2+ to VDSL2, PON, or WiMAX, subscribers can keep existing P-2612HW-F1 for terminating the IP-connection but now via the Ethernet WAN, originally DSL WAN.The end-users can still experience in most cases from the original CPE, and which is better than the case that customer have to change current CPE due to the difference of physical connection.

Ease of Wireless Network Installation with WPS, and Time Scheduling for Energy Saving

WPS provides an efficient way for users who possess even with little understanding of Wi-Fi and security configuration to automatically configure wireless LAN, add new devices, and enable security by simply pressing WPS button on the top cover.

The P-2612HW-F1 also supports Wi-Fi scheduling that allows customers to easily program when the Wi-Fi radio on or off for further energy saving.

Auto Configuration and Provisioning via TR069, and TR104

Auto provisioning mechanism allows provisioning P-2612HW-F1 at the same time of connection to the broadband access network, and the feasibility for re-provision at any subsequent time, main capabilities including auto-configuration, dynamic service provisioning, image management, status monitoring, and diagnostics.

Effective Bandwidth Management to Enhance Triple-play Application

The P-2612HW-F1 enables users to allocate network resources while guaranteeing Quality of Service (QoS). Network Bandwidth Management increases productivity and efficiency by tailoring a system to specific demands in today’s 3-play solutions where mission critical applications (VoIP, IPTV, Video on demand, etc) are expected to work in xDSL network.

Robust Firewall Protection and IPSec VPN Security

The ICSA-certified ZyNOS operating system ensures state-of-the-art SPI firewall protection especially against DoS attacks.The P-2612HW-F1 provides the first line of defense against hackers, network intruders, and other malicious threats. For SOHO users, IPsec VPN helps ensure secured transmission between two sites, allowing secure

connection between telecommuters and branch offices without expensive lease lines.

Dual WAN ADSL2+ VoIP IAD

P-2612HW-F1

VoIP

Specifications

System Specifications

DSL Features

ADSL compliance/ITU-T G.9922.1/ITU-T G.992.2 Annex A, B

(G.lite)/ITU-T G.994.1 (G.hs)

ADSL2 compliance/ITU-T G.992.3 (G.dmt.bis)/ITU-T

G.992.4 (G.lite.bis)

ADSL2+ compliance/ITU-T G.992.5

Router Features

NAT (includes multi-to-multi NAT)/SUA, 4096 NAT sessions

Full cone NAT

NAT server (port forwarding)

NAT ALGs

PPTP/L2TP/IPSec VPN pass through

PPPoE

DHCP client//server/relayy

DHCP optionss (option 42,, 43, 60, 61, and 125)*

DNS proxy

Dynamic DNS suppport

IGMP snooping andd proxy

IGMP fast leave

IP multicasting, IGMP v1, v2, v3*

IP alias

RIP I/RIP II supported

Support 16 IP static route

IP policy routing

UPnP support

Adjustable MTU size (Max 1518 byte)

Voice Functionality

SIP version 2 (RFP 3261)

Codec: G.711, G.729a/b

Wideband voice (G.722)*

Echo cancellation: G.168, VAD, silence suppression, CNG, dynamic jitter buffer

DTMF detection and generation

DTMF: in-band and out-of-band (RFC 2833), (SIP INFO)

Modem and fax tone detection and pass-through

T.38 FAX relay

DNS SRV

Phone Features

Message waiting indicator (RFC 3842)

Flexible dial plan (RFC3525 section 7.1.14)

Caller ID

FAX relay: transparent fax relay over G.711

IVR (Interactive Voice Response)

Call waiting

Call hold

Early media

Application Diagram

Migration to Future Access Technology

FXS
FXS						VDSL2 Modem,
	P-2612HW-F1
						PON ONU, or FTTH
	Dual WAN					Termination Devices
	ADSL2+ VoIP IAD

Dual WAN ADSL2+ VoIP IAD

P-2612HW-F1

Flash hook timer

•Call transferring (blind and attended transfer) Call forwarding

•Three way conference Abbreviated dialing (speed dialing)

•Shuttle enquiry call (second call) DND (Do NOT Disturb)

Call block

•CLIP (Calling Line Identification Presentation) CLIR (Calling Line Identification Restriction)

•COLP (Connected Line Identification Presentation) COLR (Connected Line Identification Restriction)

•Conference call w/media server

Caller ID generation/detection w/DTMF & FSK format

•Internal call

Speed dial (phone book)

VLAN/QoS

•Support 802.1Q port/tag based VLAN Support 802.1P priority bit

•TOS/DiffServ

Support flexible traffic classification Support 4 priority queue

•Freely assign the classified traffic to queues, VLAN, or PVC

Per VLAN IPR (IP routing), (Max 4)

•Per VLAN PPPoE (Max 4)

Media Bandwidth Management (MBM) for 3-play

Wireless LAN

•IEEE 802.11g compliance

Button/PIN mode WPS (Wi-Fi Protected Setup)

•Wi-Fi Protected Access support (WPA, WPA PSK, WPA2 (IEEE

802.11i), WPA2-PSK, WPA EAP)

•802.11e (WMM)

WLAN bridge to LAN

•MAC address filter

Support IEEE 802.1x

Multiple SSID (up to 4)

•Random WPA key

Time scheduling for wireless on/off

•SSID VLAN-tagging (guest access)*

Firewall Security

Firewall with SPI (Stateful Packet Inspection)

•Protection of DoS attacking

Content filtering: URL keyword blocking

•IP & generic packet filtering Real-time attack alert and logs

•SIP ALG

Virtual Private Network

2 concurrent VPN tunnels

IKE and manual key management

AH and ESP protocol

DES/3DES and AES encryption

SHA-1 and MD5 authentication

Tunnel and transport mode encapsulation

IPSec NAT traversal

NETBIOS pass-through for IPSec

Network Management

Web GUI

CLI (Command Line Interpreter)

Remote management for Telnet/FTP/Web/SNMP/ICMP/

DNS

Remote firmware upgrade via Web/FTP/TFTP SNMP v1 & v2c with MIB II

TR-069/TR-098/TR-104

TR-064

TR111

Hardware Specifications

RJ-11 DSL port for ADSL Annex A and RJ-45 DSL port for ADSL Annex B and U-R2

4-port auto MDI/MDI-X 10/100M Ethernet LAN ports 1-port auto MDI/MDI-X 10/100M Ethernet WAN port Wi-Fi IEEE 802.11b/g

One external dipole antenna, non-detachable Restore factory defaults button

2 FXS POTS interface

A hardware switch for DSL/Ethernet WAN

WLAN button on top side for WLAN On/Off and WPS Restore factory reset button

Power consumption: 18 W

Physical Specifications

Item weight: 460 g (1.02 lb)

Item dimensions: 218 (W) x 144 (D) x 40 (H) mm (5.67 (W) x 8.58 (D) x 1.57 (H) inch)

Packing weight: 665 g (1.47 lb)

Packing dimensions: 277 (W) x 263 (D) x 77 (H) mm (10.35 (W) x 10.9 (D) x 3.03 (H) inch)

Environmental Specifications

Operating temperature: 0 C ~ 40 C

Storage temperature: -20°C ~ 60 C

Operating humidity: 20% ~ 85% RH

Storage humidity: 20% ~ 90% RH

Certification

CE

* Feature Released in Future/F/W upgradeable.

802.11b/g	Set-top Box
Client Adapter

Wi-Fi

Phone

Video Server

		P-2612HW-F1
	FXS FXS	Dual WAN
		ADSL2+ VoIP IAD

Internet

	IP Telephony
COE	Service Provider
			PSTN Phone
	Trunking	PSTN
	Gateway
	VoIP Call Center	Network				Mobile
						Network

F o r m o r e p r o d u c t i n f o r m a t i o n , v i s i t u s o n t h e w e b a t w w w . Z y X E L . c o m

Copyright © 2009 ZyXEL Communications Corp. All rights reserved. ZyXEL, ZyXEL logo are registered trademarks of ZyXEL Communications Corp. All other brands,	65-100-261201B	03/09
product names, or trademarks mentioned are the property of their respective owners. All specifications are subject to change without notice.