ZTE Light V9A (Brightpoint), V9A (Brightpoint) Quick Start Guide
Light
Quick Start Guide
Light
Quick Start Guide
LEGAL INFORMATION
Copyright © 2012 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form
or by any means, electronic or mechanical, including photocopying and microlm, without
the prior written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modications
on print errors or update specications without prior notice.
Version No. : R1.0
Edition Time : 2012.1
Manual No. : 079584504204
Overview
Before Getting Started
For more information, please read the user manual stored in the preinstalled
microSD card.
1. Insert the SIM card 2. Insert the microSD card
Notes: microSD logo is a trademark of the SD Card Association.
4. Replace the cover 5. Charge up
(may already be inserted)
3. Install the battery
Powering On & Off
1. To power on your device, hold the Power Key.
2. To power off your device, hold the Power Key to get the phone options, select
the Power off option, and then tap OK.
Switching Your V9A to Sleep Mode
Sleep Mode suspends your device to a low-power-consumption state while
the display is off to save battery power. Your device also goes into Sleep Mode
automatically when you leave it idle after a certain period of time.
Press Power Key.
Waking Up Your V9A from Sleep Mode
1. Press the Power Key to activate your screen display.
2. Drag the unlock icon to the right.
Product Safety Information
Read the Safety Information
section of this user guide
Do not use hand-held while
driving
For body-worn operation
maintain a separation of 0.5cm
Small parts may cause a
choking hazard
This device may produce a
loud sound
Keep away from pacemakers
and other personal medical
devices
Switch off when instructed in
hospitals and medical facilities
Do not use while re-fuelling
This device may produce a
bright or ashing light
Do not dispose of it in a re
Avoid contact with magnetic
media
Avoid Extreme Temperatures
Avoid any contact with liquid,
keep it dry
Do not attempt to disassemble
Switch off when instructed in
aircrafts and airports
Switch off in explosive
environments
Do not rely on this device for
emergency communications
Only use approved accessories
RF Exposure
Your device contains a transmitter and a receiver. When it is ON, it receives and
transmits RF energy. When you communicate with your device, the system handling
your communication controls the power level at which your device transmits.
Specic Absorption Rate (SAR)
Your mobile device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific organization
ICNIRP and include safety margins designed to assure the protection of all persons,
regardless of age and health.
The guidelines use a unit of measurement known as the Specic Absorption Rate,
or SAR. The SAR limit for mobile devices is 2 W/kg. The highest SAR value for this
device when tested was 1.58W/kg and complied with this limit.
Limiting exposure to radio frequency (RF) elds
For individuals concerned about limiting their exposure to RF fields, the World
Health Organisation (WHO) provides the following advice:
Precautionary measures: Present scientific information does not indicate the
need for any special precautions for the use of mobile devices. If individuals are
concerned, they might choose to limit their own or their children’s RF exposure by
limiting the length of calls, or using ‘hands-free’ devices to keep mobile devices
away from the head and body.
Further information on this subject can be obtained from the WHO home page
http://www.who.int/peh-emf WHO Fact sheet 193: June 2000.
National Restrictions on Wi-Fi Usage
2400.0-2483.5 MHz
This equipment may be operated in:
AT BE CY CZ DK EE
FI FR DE GR HU IE
IT LV LT LU MT NL
PL PT SK SI ES SE
GB IS LI NO CH BG
RO TR
Country Restrictions Reason/remark
Bulgaria
General authorization required for outdoor use and
public service.
Please don't
France
Italy
Luxembourg None
Norway Implemented
Russian
Federation
use WIFI
function
outdoors.
Military Radiolocation use. Refarming of the 2.4
GHz band has been ongoing in recent years to allow
current relaxed regulation. Full implementation
planned 2012.
If used outside of own premises, general
authorization is required.
General authorization required for network and
service supply (not for spectrum).
This subsection does not apply for the
geographical area within a radius of 20 km from
the centre of Ny-Ålesund.
Only for indoor applications.
Declaration of RoHS Compliance
To minimize the environmental impact and take more responsibility to the earth we
live in, this document shall serve as formal declaration that the V9A manufactured
by ZTE CORPORATION is in compliance with the Directive 2002/95/EC of the
European Parliament - RoHS (Restriction of Hazardous Substances) with respect to
the following substances:
(1) Lead (Pb) (2) Mercury (Hg)
(3) Cadmium (Cd) (4) Hexavalent Chromium (Cr (VI))
(5) Polybrominated biphenyls (PBB’s)
(6) Polybrominated biphenyl ethers (PBDE’s)
(Compliance is evidenced by written declaration from our suppliers, assuring that
any potential trace contamination levels of the substances listed above are below
the maximum level set by EU 2002/95/EC, or are exempt due to their application.)
The V9A manufactured by ZTE CORPORATION, meets the requirements of EU
2002/95/EC.
Disposal of Your Old Appliance
1. When this crossed-out wheeled bin symbol is
attached to a product, it means the product is
covered by the European Directive 2002/96/EC.
2. All electrical and electronic products should be
disposed of separately from the municipal waste
stream via designated collection facilities appointed
by the government or the local authorities.
3. The correct disposal of your old appliance will help
prevent potential negative consequences for the
environment and human health.
For this product’s recycling information based on WEEE directive, please
send an e-mail to weee@zte.com.cn.
EC DECLARATION OF CONFORMITY
It is hereby declared that the following designated product:
Product Type: TABLET
Model No.: V9A
Complies with the essential protection requirements of the Radio and
Telecommunication Terminal Equipment Directive (EC Directive 1999/5/EC) and the
Electromagnetic Compatibility Directive (2004/108/EC).
This declaration applies to all specimens manufactured identical to the samples
submitted for testing/evaluation.
Assessment of compliance of the product with the requirements relating to the
Radio and Telecommunication Terminal Equipment Directive (EC Directive 1999/5/
EC) was performed by American TCB (Notified Body No.1588), based on the
following standards:
Safety EN 60950-1:2006/A11:2009
EN 301 489-1 V1.8.1; EN 301 489-3 V1.4.1;
EMC
EN 301 489-7 V1.3.1; EN 301 489-17 V2.1.1;
EN 301 489-24 V1.5.1; EN 55013:2001+A2:2006;
EN 55020:2007;
EN 301 511 V9.0.2;
Radio
EN 301 908-1 V4.2.1; EN 301 908-2 V4.2.1;
EN 300 328 V1.7.1; EN 300 440-1 V1.6.1; EN 300 440-2 V1.4.1;
Health
EN 62311:2008; EN 62209-2:2010
EN 50332-1:2000; EN 50332-2:2003
This declaration is the responsibility of the manufacturer:
ZTE Corporation
ZTE Plaza, Keji Road South, Hi-Tech Industrial Park,
Nanshan District, Shenzhen, Guangdong, 518057, P. R. China
Authorised person signing for the company:
Xu Feng Quality Director of ZTE Corporation
Name in block letters & position in the company
Shenzhen, 4st August 2011
Place & date Legally valid signature
Loading...