ZTE S189 User Manual
CDMA 1X Digital Mobile Phone
Quick Start Guide
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: (86) 755 26779999
URL: http://www.zte.com.cn
E-mail: mobile@zte.com.cn
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No.: R1.0
Edition Time: 05.2011
Manual No.: 079584502xxx
Knowing your phone
Key instruction
Key Function Description
Call key
End key
Left soft key
Right soft key
• Make or answer a call.
• Press Call key in standby mode to view All Calls list.
• Press Call key twice directly to redial the last number.
• End an active call or reject a call.
• Press and hold to power on/power off.
• Exit from any interface to standby mode.
• Enter main Menu in standby mode.
• Switch to the options of left bottom submenu.
• Enter All lists in Contacts in standby mode.
• Switch to the options of right bottom submenu.
• Erase character(s) while editing.
OK key
Navigation keys
• Cancel operation, exit to previous pop-up window.
• Enter Freedom menu in standby mode.
• Confirm the commands and options selected.
• Confirm the character chosen while character inputting.
• Move the cursor up, down, left and right.
Key Function Description
• In standby mode, Used as hot keys to enter the designated functions.
• In Contacts list, press the Left key or Right key to switch groups.
• Press the Left key or Right key to adjust volume in conversation.
0 ~ 9 Number keys
* key
# key
• Key in numbers or characters.
• Make a Speed Dial call.
• Press and hold 0 key to input + in standby mode.
• Press and hold * key in standby mode to lock phone’s keypad.
• Press * key once to enter Symbols mode in text input mode.
• Press and hold # key in standby mode to enable/disable vibration.
• Press # key to select text mode when edit text.
Installing UIM card and battery
1. Remove the battery cover.
Notes:
The correct way to remove the battery cover varies with the model of the phone. Refer to the following
diagrams.
2. Insert UIM card into UIM card slot in the phone.
3. Place the battery into the battery slot, to be noted that the lower end of the battery firstly inserted.
Notes:
For the first three times, use up the power and charge it fully for a new battery to perform well.
4. Replace the battery cover.
Charging the battery
1. Plug out rubber away from the jack on the bottom of the phone and connect the lead from the charger to
the socket on the bottom of the phone.
Notes:
The side with arrow should be upright while connecting.
2. Connect the charger to a standard wall AC socket.
3. When the charging animation on the screen stops, the charging is completed. The charging takes
usually up to 2～3 hours. During charging, it is a normal phenomenon that the battery, phone and
charger may get hot.
4. After the completion of charging, disconnect the charger from the phone and AC socket.
Loading...