ZTE R212 User Manual

Vodafone Mobile Wi-Fi

R212

Let’s go

Getting started with your device.

ZTE CORPORATION NO. 55, Hi-tech Road South, ShenZhen, P.R .C hi na Postcode: 518057

Confidential and Proprietary Information of ZTE CORPORATION 1

LEGAL INFORMATION

No part of this publication may be excerpted, reproduced, translated or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without the prior written permission of ZTE Corporation.

The manual is published by ZTE Corporation. We reserve the right to make modifications on print errors or update specifications without prior notice.

Version No. : R1.0 Edition Time : 2012.12

NOTE: Do not use the device in an enclosed environment or where heat dissipation is poor. Prolonged work in

such space may cause excessive heat and raise ambient temperature, which may lead to automatic shutdown of the device for your safety. In the case of such event, cool the device in a well-ventilated place before turning on for normal use.

Getting to Know Your Device

Appearance

The following figure is only for your reference. The actual product may be different.

 External Antenna Connector

 Micro USB Port

 OLED Screen

 Power Switch

 (U)SIM Card Slot

 RESET Button / microSD Card Slot

 WPS Button

NOTES:

 microSD logo  Please use the original external antenna if necessary.

is a trademark of SD Card Association.

Indicators

When the device is powered on, the following icons will appear on the OLED screen, with the corresponding indicates listed in the table below:

Icon Indication

2G/3G/4G Network type. 2G, 3G, 4G icon will appear on the OLED screen according to the

Network signal strength.

network being connected.

Connect to the Internet automatically.

Connect to the Internet manually.

Roaming network indication.

New message received.

Wi-Fi Status and number of the connected users.

Battery power indication.

Connection Scenario

Your device supports two methods to go to Internet and supports multi-clients for surfing on the Internet at the same time. The following figure is only for your reference.

 4G Mode: Use your (U)SIM card to access the Internet.

 AP Station Mode: Your device will connect to other WLAN device (hotspot device,

wireless router, etc.) via Wi-Fi to access the Internet. The WLAN device has already connected to the Internet.

NOTE:

The subnet must be deferent between your device and other WLAN device.

Installing Your Device

1. Insert the SIM card.

2. Insert the microSD card.

1) Open the microSD card cover.

NOTE:

Do not pull the cover rudely, as it is connected with the device.

2) Insert the microSD card into the microSD slot. The following picture shows the correct inserting

direction. You will hear a click when the microSD card locks in place.

3) Close the microSD card cover.

Connecting to Your Device

Via Wi-Fi

1. Power on your device directly. It will take 1~2 minutes to initialize.

2. Use your normal Wi-Fi application on the client to search for the available wireless networks.

NOTE: Please set the client to obtain an IP address automatically referring to the chapter “Configuring Your PC”, and then the client will get an IP address like “192.168.0.100”.

3. Select the SSID of your device, and then click Connect. The following picture is only for

your reference.

4. Input the password, and then click Connect.

NOTE:

 There may require the password for Wi-Fi connection, please check the label on your device to get

the default.

 Double press the W

PS button, and then the SSID and Wi-Fi key will display on the OLED

screen.

+ 11 hidden pages