No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Confidential and Proprietary Information of ZTE CORPORATION 1
Serial
Number
Key Description
1
2
Earpiece
LCD screen
Navigation Keys (Up/Down/Left/Right Key)
•In standby mode: Used as hot keys to enter the designated funct ions. Press Up Key to
enter Messages menu. Press Down Key to view recent All Calls list . Press Left Key to
3
enter Settings. Press Right Key to enter UTK.
•To designate the functions accessed by the navigation keys.
•In lists, messages and menus: scroll up, down, left and right.
Left Soft Key
4
5
•The current function of the key is shown in the bottom line of the display.
•Press to enter main menu in standby mode.
Camera Key - Press to make a shot.
Call Key
6
•Press to send or answer calls.
•In standby mode: Press to show all outgoing calls.
Number Keys
7
8
~
•Press to enter numbers.
•Press and hold the number key to start speed dial.
Microphone
* Key
•Press to enter "*".
9
•In an editing screen: Press to input punctuation and symbols.
•Hold to lock the keypad in standby mode.
OK Key
10
•In standby mode: Press to open MobileShop.
•In list and menu: Start an application/function.
Right Soft Key
11
•The current function of the key is shown in the bottom line of the display.
•In standby mode: Press to enter Contacts.
Clear/Music Key
12
2 Confidential and Proprietary Information of ZTE CORPORATION
•In an editing screen: Press to erase character.
•In standby mode: Press to open the Music Player.
13
14
End Key
•Press and hold to turn the phone on/off.
•Press to end a call.
•Press to reject an incoming call.
•Press to cancel dialing.
•Press to return to standby mode.
# Key
•Press to enter "#".
•In an editing screen: Press to change the input method.
•In standby mode: Press and hold to activate/deactivate vibration mode.
15
16
17
18
19
20
Indicators and icons
CDMA 2000 1X Signal
EVDO Signal
Camera
Speaker
Handset charm slot
Charger/USB connection jack/Headset port
Volume keys
Camera
CDMA 2000 1X Service
EVDO
SMS
MMS & SMS
MMS
Ringer On
Vibrate On
Silent mode
Airplane mode
Roam
Alarm
Call Connect
Bluetooth
Bluetooth Headset
Earphone
Battery indicator
Confidential and Proprietary Information of ZTE CORPORATION 3
External Memory
Web Security
Note:
Schedule
Voice Mail
Voice+Web Message
Web Message
Voice Privocy
The indicators or icons on the information bar may appear according to network situation or need support
by the service provider.
Starting up
Inserting UIM card
You can obtain an UIM card from your service provider when you sign on as a subscriber.
Caution:
• Do not bend or scratch your UIM card. Keep the card away from electricity and magnetism.
• Don’t touch the metal surface of the UIM card in case that information in the card may be lost or
destroyed.
• Make sure to disconnect the charger and other accessories from your phone and remove the battery
before inserting and removing your UIM card.
1. Press and hold the End Key to power off the phone.
2. Slide down the battery cover and remove the battery.
3. Insert the UIM card into the card holder, with the metal contacts facing downward and the cut corner in
right direction. Make sure it is pushed all the way to the end as shown below.
4. Push the battery until it clicks into position.
5. Place the battery cover onto the back of your phone.
Notes:
The charger and other accessories should be disconnected from your phone before you insert or
remove the UIM card.
Removing UIM card
1. Press and hold the End Key to power off the phone.
4 Confidential and Proprietary Information of ZTE CORPORATION
2. Remove the cover.
3. Remove the battery. See Removing battery.
4. Remove UIM card gently from the card holder.
Installing battery
Notes:
• The phone automatically switches off if the battery voltage is too low.
• When not using the battery for a long period, remove it from the phone and store it in a cool dry place.
1. Press and hold End Key to turn off the phone.
2. Remove the cover.
3. Insert the battery carefully with the contacts located against the gold springs.
4. Push down the battery until it clicks into place.
5. Place the battery cover onto the back of your phone.
Caution:
Do NOT force the cover down by pressing on it. This will damage the cover.
Removing battery
1. Power off your phone.
2. Remove the cover.
3. Lift the battery away from the phone.
Inserting memory card
The external memory card gives your phone a very large memory capacity. This allows you to save
multimedia data, including images, photos, MP3 audio files, and ring tones. You can also use this memory
Confidential and Proprietary Information of ZTE CORPORATION 5
card to store any other files.
Tips:
Your phone can support a memory card with capacity up to 16GB.
1. Open the memory card slot rubber.
2. Firmly insert the
3. Close the
memory card slot rubber.
memory card into the slot until it clicks into place.
Caution:
Only use ZTE approved memory cards for this device. Any use of unapproved memory cards may cause
loss of data or damage to your phone.
Removing memory card
1. Open the memory card slot rubber.
2. Push the
3. Pull the
4. Close the
Tips:
• Do not remove the memory card while reading or writing to the card. Doing so may cause data
memory card to release it from the slot.
memory card completely out of the memory slot on the phone.
memory card slot rubber.
corruption on the card or phone. If possible, insert and remove the memory card while the phone is
powered off.
• You’d better use your phone to format your memory card. If you want to format it on your PC, please
select FAT Formatting type. Otherwise it might cause the memory card not identified by your phone.
Connecting accessories
You can connect your headset to your phone to answer the call and listen to the music. You can also strap
handset charm on your phone.
Connect the headset to your phone
Insert the headset to the Headset port.
Connect the data cable to your phone
Plug the smaller end of the cable into the USB connection jack at one side of the phone, and the bigger
6 Confidential and Proprietary Information of ZTE CORPORATION
end into the USB port of the computer.
Strap handset charm on your phone
Thread a strap and tighten it.
Power on/off
Notes:
Do not power on your phone if wireless phone use is unapproved, or when it may cause interference or
danger.
1. Press and hold End Key to turn the phone on.
Tips:
When being asked, enter your PIN (Personal Identification Number) code or phone code.
The PIN code is the password provided by your network service provider. You need this password to
use the UIM card.
When the entered PIN code or phone code is accepted, the phone will automatically search for the
designated network. After a few seconds, your phone will show the standby mode.
2. To power off the phone, press and hold the End Key from the standby mode.
Charging
Your phone is powered by a rechargeable battery. The battery is not fully charged when first unpacked,
but there may be enough power to power your phone on. You should use it up completely before charging
the battery for the first time. Charge the battery with the procedure indicated below.
1. Open the USB port cover.
2. Insert the charger's USB adapter into the USB port.
3. Connect the charger to a standard AC wall outlet.
4. Remove the charger from both the wall outlet and the phone once the charging completed.
Confidential and Proprietary Information of ZTE CORPORATION 7
Notes:
• Make sure that the adapter is inserted into the correct position. Do not force the connector into the port.
• The battery will be fully charged for 3~4 hours.
• Use the charger provided by the original provider. Using unapproved charger may cause danger and
violate the authorization and warranty rules of the phone.
• If the phone is over-used in shortage of battery or not used for a long time, the screen may not display
the charge indicator until it is continues charged for 10 to 40 minutes.
• For maximum battery performance, it is recommended that you completely charge the battery before
using the phone for the first time. A new battery’s full performance is achieved only after three
complete charge and discharge cycles.
• Once the charging is complete, remove the charger from both the power outlet and the phone.
• To charge the battery, you can use the provided charger or the USB data cable.
• Charging is only possible within a temperature range of -5℃ to +45℃.
Keypad lock
Use the keypad lock to prevent the keys from being accidentally pressed.
In standby mode, hold * Key to lock the keypad.
Also you can select Left Soft key [Menu] > Settings > Others > Keypad Lock Set and set the keypad
locking automatically. Or cancel the keypad locking automatically.
If you want to unlock the keypad, press Right Soft Key [Unlock] firstly and then press * Key to unlock.
Tips:
• When the keypad is locked, Unlock is shown in the bottom right hand of the screen.
• If the call is coming when the keypad is locked, you can press Call Key to answer. After ending or
rejecting the call, the keypad will be locked automatically.
• When the keypad lock is on, calls may be possible to the official emergency number programmed into
your device.
Basic operation
Menu
In standby mode, press Left soft key [Menu] to enter main menu.
Tools
The Tools includes Calculator, Alarm Clock, Scheduler, U-DISK, World Clock and so on.
Messages
SMS (Short Messaging Service) allows you to send text messages and manage the messages that you sent
and received.
8 Confidential and Proprietary Information of ZTE CORPORATION
You can also send and receive MMS (Multimedia Message Service) messages. MMS enables you to send
messages with images, sounds and texts. Consult your service provider whether this service is available.
You may need to register separately for this service.
Call History (Call Log)
You can check the phone numbers of missed, received, and dialed voice calls.
Web (UTK)
You can get the latest information from the Internet through your phone.
Internet access may require registration with the service provider.
The browser is activated with the preset option as soon as you call up the function. Browser settings may
be specified/pre-assigned by the service provider.
Surfing (TATA ZONE)
This function allows you to browse, purchase and download applications online. You can consult your
service provider for more information about this function.
Contacts
You can store contacts with a variety of phone and fax numbers as well as additional address details.
The phone can store up to 500 entries. The capacity of a phone book on your UIM card depends on the
type of UIM card provided by your network operator.
Settings
You can set or personalize your phone.
Multimedia (Music & Media)
You can take photos or videos through camera, record audios, and so on.
Games
You can play games.
Navigating your phone
The phone features, various functions and settings organized in menus and submenus. To select a function
from menus:
1. In standby mode, press Left soft key [Menu] to open main menu.
2. Use Navigation keys to scroll up, down, right or left to select menu.
For example, scroll to Settings.
3. Press OK key to enter the menu.
4. Press Up key or Down key to scroll to a submenu, for example Display/Keypad.
5. Press OK key [Select] to confirm selection.
6. Press Up key or Down key to scroll to the desired option, for example, Backlight Time.
7. Press Left key or Right key to scroll to the desired option, for example, 30 seconds.
Confidential and Proprietary Information of ZTE CORPORATION 9
Loading...
+ 32 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.