ZTE Q200 User Manual
Q200
CDMA 1X Digital Mobile Phone
ZTE CORPORATION
NO. 55, Hi-tech Road South, ShenZhen, P.R.China
Postcode: 518057
Tel: +86-755-26779999
URL: http://www.zte.com.cn
E-mail: mobile@zte.com.cn
User Guide
LEGAL INFORMATION
Copyright © 2011 ZTE CORPORATION.
All rights reserved.
No part of this publication may be excerpted, reproduced, translated or utilized in any form or by
any means, electronic or mechanical, including photocopying and microfilm, without the prior
written permission of ZTE Corporation.
The manual is published by ZTE Corporation. We reserve the right to make modifications on print
errors or update specifications without prior notice.
Version No. : R1.0
Edition Time : June.2011
Manual No. :
C h a p t e r 1
Phone Overview
1
C h a p t e r 2
Key Functions
Key Function Description
• Make or answer a call.
• Press Send key in standby mode to enter Call History list.
• End an active call or reject a call.
• Long press to Power on/Power off.
• Exit from any interface to standby mode.
• Enter main Menu in standby mode.
• Switch to the options of left bottom submenu.
• Enter Radio in standby mode.
• Switch to the options of right bottom submenu.
• Cancel the current operation; go back to the previous window.
• Confirm the commands and options selected.
Up/Down key
~
• Scroll the cursor up and down.
• Used as selection key to scroll cursor up and down for keying in commands and selecting
options shown on the display.
• In standby mode, press Up key or Down key to active pre-set functions.
• Used as direction key in games.
• Adjust volume when listening radio or in conversation.
Left/Right key
• Scroll the cursor left and right.
• Used as selection key to scroll cursor left and right for keying in commands and selecting
options shown on the display.
• In standby mode, press Left key or Right key to active pre-set functions.
• Used as direction key in games.
• Select the stored radio channel when listening radio.
Use to enter characters, numbers and symbols.
2
Key Function Description
Press to enter the message menu in standby mode.
Press to display all stored contacts
in standby mode.
Press to erase the characters.
• Press Alt key to switch superscript and subscript.
• Press Alt key twice to keep the keys to input superscript numbers or symbols. Press Alt key
again to back to normal status.
Press Enter key to enter the next line when entering text.
• Use to enter space in editing text.
• Long press to lock the keyboard in standby mode.
• Press Shift key to switch between uppercase and lowercase.
• Press Shift key once to enter one uppercase character; press twice to lock uppercase status; and
press the shift key again to back to normal status.
In standby mode, press MP3 Key to play music.
• Press and hold Silence key to active/deactivate vibrate mode in standby mode.
• Press to open the symbols panel when entering text.
3
C h a p t e r 3
Open the Back Cover
Remove the back cover as shown below.
4
ZTE-C Q200 User Guide
C h a p t e r 4
Remove and Install the Battery
The attached Li-ion battery along with the phone can be used after unpacking. For the first three times,
please use up the power and charge it fully for a new battery to perform well.
Remove the Battery
Put finger on the finger grips, and then lift up the battery to remove the battery.
Install the Battery
1. Install the battery as shown below. Replace the battery into the battery slot, to be noted that the side of
the battery firstly inserted.
2. Put the back cover of the phone flatly upon the body of phone. Direct the back cover towards the
locking catches on the each side of the phone and press the back cover of the phone to lock the cover
into its place.
Confidential and Proprietary Information of ZTE CORPORATION 5
6
Loading...