ZKTECO UFH 10 Pro User Manual

UHFS Pro/UHFlO Pro Reader

User Manual

Page

LTD.

Allrightsreserved.

Without the prior written consent of ZKTeco, no portion of this manual can be

copied or forwarded in any way or form. All parts of this manual belong to

ZKTeco and its subsidiaries (hereinafter the "Company" or "ZKTeco").

Trademark

ZKTa:

this manual are owned by their respective owners.

口

is a registered trademark of ZKTeco. Other trademarks involved in

Disclaimer

This manual contains information on the operation and maintenance of the

ZKTeco equipment. The copyright in all the documents, drawings, etc. in

relation to the ZKTeco supplied equipment vests in and is the property of

ZKTeco. The contents hereof should not be used or shared by the receiver with

any third party without express written permission of ZKTeco.

The contents of this manual must be read as a whole before starting the

operation and maintenance of the supplied equipment. If any of the content(s)

of the manual seems unclear or incomplete, please contact ZKTeco before

starting the operation and maintenance of the said equipment.

It is an essential pre-requisite for the satisfactory operation and maintenance

that the operating and maintenance personnel are fully familiar with the

design and that the said personnel have received thorough training in

operating and maintaining the machine/unit/equipment.It is further essential

for the safe operation of themachine/unit/equipment that personnel has read,

understood and followed the safety instructions contained in the manual.

In case of any conflict between terms and conditions of this manual and the

UHFS Pro/UHFlO Pro Reader

User Manual

Page

LTD.

Allrightsreserved.

contract specifications, drawings, instruction sheets or any other contract-

related documents, the contract conditions/documents shall prevail. The

contract specific conditions/documents shall apply in priority.

ZKTeco offers no warranty, guarantee or representation regarding the

completeness of any information contained in this manual or any of the

amendments made thereto. ZKTeco does not extend the warranty of any kind,

including, without limitation, any warranty of design, merchantability or

fitness for a particular purpose.

ZKTeco does not assume responsibility for any errors or omissions in the

information or documents which are referenced by or linked to this manual.

The entire risk as to the results and performance obtained from using the

information is assumed by the user.

ZKTeco in no event shall be liable to the user or any third party for any

incidental, consequential, indirect, special, or exemplary damages, including,

without limitation, loss of business, loss of profits, business interruption, loss

of business information or any pecuniary loss, arising out of, in connection

with, or relating to the use of the information contained in or referenced by

this manual, even if ZKTeco has been advised of the possibility of such

damages.

This manual and the information contained therein may include technical,

other inaccuracies or typographical errors. ZKTeco periodically changes the

information herein which will be incorporated into new

additions/amendments to the manual. ZKTeco reserves the right to add,

delete, amend or modify the information contained in the manual from time

to time in the form of circulars, letters, notes, etc. for better operation and

safety of the machine/unit/equipment.The said additions or amendments are

meant for improvement /better operations of the machine/unit/equipment

and such amendments shall not give any right to claim any compensation or

UHFS Pro/UHFlO Pro Reader

User Manual

Page

LTD.

Allrightsreserved.

damages under any circumstances.

ZKTeco shall in no way be responsible (i) in case the machine/unit/equipment

malfunctions due to any non-compliance of the instructions contained in this

manual (ii) in case of operation of the machine/unit/equipment beyond the

rate limits (iii) in case ofoperation of the machine and equipment in conditions

different from the prescribed conditions of the manual.

The product will be updated from time to time without prior notice. The latest

operation procedures and relevant documents are available on

http://www.zkteco .com

If there is any issue related to the product, please contact us.

ZKTeco Headquarters

Address ZKTeco Industrial Park, No. 26, 188 Industrial Road,

Tangxia Town, Dongguan,China.

Phone +86 769 - 82109991

Fax +86 755 - 89602394

For business related queries, please write to us at: sal es@zkte co.com.

To know more about our global branches, visit www.zkteco.com.

UHFS Pro/UHFlO Pro Reader

User Manual

About the Company

ZKTeco is one of the world's largest manufacturer of RFID and Biometric

(Fingerprint, Facial, Finger-vein) readers. Product offerings include Access

Control readers and panels, Near&Far-range Facial Recognition Cameras,

Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR)

gate controllers and Consumer products including battery-operated

fingerprint and face-reader Door Locks. Our security solutions are multi-

lingual and localized in over 18 different languages. At the ZKTeco state-of-

the-art 700,000 square foot 1509001-certified manufacturing facility, we

control manufacturing, product design, component assembly, and

logistics/shipping, all under one roof.

The founders of ZKTeco have been determined for independent research and

development of biometric verification procedures and the productization of

biometric verification SDK, which was initially widely applied in PC security

and identity authentication fields. With the continuous enhancement of the

development and plenty of market applications, the team has gradually

constructed an identity authentication ecosystem and smart security

ecosystem,which are basedon biometric verification techniques. With years

of experience in the industrialization of biometric verifications, ZKTeco was

officially established in 2007 and now has been one of the globally leading

enterprises in the biometric verification industry owning various patents and

being selected as the National High-tech Enterprise for 6 consecutive years. Its

products are protected by intellectual property rights.

About the Manual

This manual introduces the operations of UHFS Pro/UHFl O Pro Reader.

All figures displayed are for illustration purposes only. Figures in this manual

may not be exactly consistent with the actual products.

Page

UHFS Pro/UHFlO Pro Reader

User Manual

Table of Contents

OVERVIEW

SIDE VIEW &WIRING..................................................................................... 7

SPECIFICATIONS

DIMENSIONS.................................................................................................. 9

SOFTWARE CONFIGURATION................................................................10

5.1

INTRODUCTION

5.1.1

5.1.2

5.1.3

ACCESS CONTROLLER CONNECTION

INSTALLATION PROCEDURE

WIRING DIAGRAM....................................................................................... 22

FAQ................................................................................................................. 22

......................................................................................................

..........................................................................................

..........................................................................................................

MAIN INTERFACE..............................................................................................10

RS485 SETTING INTERFACE..........................................................................14

SYSTEM SETTINGS

..........................................................................................

................................................

..................................................................19

Page IS



928

UHFS Pro/UHFlO Pro Reader

User Manual

Page

Black

Green

Wiegand DO

White

Wiegand D1

Purple

Trigger Point

Gray

GND

USB

Connect to PC

Brown

RS485+

Orange

RS485-

Side View & Wiring

Mounting

Bracket

UHFS Pro/UHFlO Pro Reader

User Manual

Page

3 Specifications

Antenna Gain

Dimension

Weight

Power

Frequency

9dBi

308.5*308.5*67.5 mm

1.8kg

1.2 to 4.2 W

12dBi

445*445*67.5 mm

3kg

1.2 to 4.5 W

Communication

interface

Interface Protocol

Working Mode

Output Power

Protection Class

Working Voltage

Working

Temperature and

Humidity

Storage

Temperature and

Humidity

RS485

Communication

-20°(to 65°(,<85%

-20°(to 80°(,<85%

Optional baud rate (9600, 19200, 38400, 57600,

115200). The default is 115200

Reading Distance 2 to 8 meters (Hand-held 10 to 20meters (Hand-

test) held test)

Actual scenario test is Actual scenario test is

around 4m around 8m

E: 865MHz to 868MHz

F: 902MHz to 928MHz (supports adjustment)

Wiegand; RS485; USB Configuration parameters

(Wiegand, RS485 requires one of the two options)

EPC global UHF Class 1 Gen 2 / ISO 18000-6(

Read Always (Default) & Read by Trigger

19dBm to 30dBm

IP66

DC 9 tolSV

+ 18 hidden pages

ZKTECO UFH 10 Pro User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual

Trademark

Disclaimer

ZKTeco Headquarters

Fax +86 755 - 89602394

About the Company

About the Manual