ZKTECO PRORFI User Manual

ProRF

User Manual

Version: 1.0

Date: Nov. 2018

Important Statement

Thank you for choosing our product. Before using this product, please read this user manual carefully to avoid risks

of danger to the users of this product or those nearby and damaging the device. Follow these instructions to

ensure that your product functions properly and completes verifications in a timely manner.

Unless authorized by our company, no group or individual shall take excerpts of or copy all or part of these

instructions nor transmit the contents of these instructions by any means.

The products described in this manual may include software that is copyrighted by our company and its possible

licensors. No one may copy, publish, edit, take excerpts of, decompile, decode, reverse-engineer, rent, transfer,

sublicense, or otherwise infringe upon the software's copyright unless authorized by the copyright holder(s). This is

subject to relevant laws prohibiting such restrictions.

As this product is regularly updated, we cannot guarantee exact consistency between the actual

product and the written information in this manual. Our company claims no responsibility for any

disputes that arise due to differences between the actual technical parameters and the descriptions in

this document. The manual is subject to change without prior notice.

Contents

1. Must Know ......................................................................................................................................................................................................................................... 1

1.1 Product Profile .................................................................................................................................................................................................................. 1

1.2 Communication Connections ................................................................................................................................................................................ 1

2. Access Control Software ........................................................................................................................................................................................................... 2

2.1 Adding a device ............................................................................................................................................................................................................... 2

2.1.1 Device Settings ................................................................................................................................................................................................. 5

2.2 Adding a user and a card ........................................................................................................................................................................................... 5

2.3 Access Control Settings .............................................................................................................................................................................................. 6

2.4 Upload and download ................................................................................................................................................................................................ 6

2.4.1 Sync All Data to Device ............................................................................................................................................................................... 7

2.4.2 Get Event Entries ............................................................................................................................................................................................. 8

2.4.3 Get Personnel Data From Device .......................................................................................................................................................... 9

2.5 Monitor in real time ....................................................................................................................................................................................................... 9

CE Note .................................................................................................................................................................................................................................................. 10

FCC Warning ....................................................................................................................................................................................................................................... 11

1. Must Know

TCP/IP

…

Switch PC

1.1 Product Profile

SCR100 Plus released by our company is the World’s first access controller and reader based on TCP/IP, professional

access control machine with ID card but no screen and no press-key. These access control product series added

with ID card provide a more product choices for system access control solutions. It can be used as a separate

control lock, also can be used as an access controller connecting ID cards, to realize master-slave machine or

anti-passback function. The device can connect with Ethernet over TCP/IP. It can be embedded with Webserver to

visit query records and so on via Internet.

1.2 Communication Connections

The background PC software can communicate with the device, upload and download data and perform remote

management of the terminal over TCP/IP. The device can connect with Ethernet in the following two ways:

1. The device directly connects to the computer.

2. The device connects to the computer over an Ethernet through a switch.

The default IP address is 192.168.1.201. IP addresses of the server (PC) and the device must be in the same network

segment.

2. Access Control Software

Suppose the device has connected with PC well and the access control software has been installed already.

On the desktop, double-click the ZKBiosecurity icon to enter the system.

[admin], and the password is [admin], then click [login]. After the first login to the system, please reset the

password in [Personnel Information].

The user name of the super user is

2.1 Adding a device

 Add Device by manually

1) Click [Access Device] > [Device] > [New] on the Action Menu, the following interface will be shown:

+ 10 hidden pages