
ZINWELL HD Wireless Video Transmission Product
Zinwell Corporation
7th, No. 512, Yuan Shan Road, Chung Ho City, 235,
Taipei County, Taiwan
TEL:+886 2 22251929 FAX:+886 2 22269654
http://www.zinwell.com.tw
CONFIDENTIAL
Page 1 of 12
Full HD Video Wireless Module
Zinwell Corporation
Full HD Video Wireless Module
User Manual
Transmitter : RF-31100M
Receiver : RF-32100M
Version 0.1
B002-08B

ZINWELL HD Wireless Video Transmission Product
Zinwell Corporation
7th, No. 512, Yuan Shan Road, Chung Ho City, 235,
Taipei County, Taiwan
TEL:+886 2 22251929 FAX:+886 2 22269654
http://www.zinwell.com.tw
CONFIDENTIAL
Page 2 of 12
EDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver
is connected.
-Consult the dealer or an experienced radio/ TV technician for help.
CAUTION:
Any changes or modifications not expressly approved by the grantee of this device could
void the user's authority to operate the equipment.
This device is operation in 5.15 - 5.25GHz frequency range, then restricted in indoor use
only.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
Full HD Video Wireless Module
CAUTION:
Any changes or modifications not expressly approved by the grantee of this
device could void the user's authority to operate the equipment.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to provide a
separation distance of at least 20 cm from all persons and must not be co-located or
operating in conjunction with any other antenna or transmitter. End-users and
installers must be provide with antenna installation instructions and transmitter
operating conditions for satisfying RF exposure compliance.
Industry Canada regulatory information Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device
must accept any interference, including interference that may cause undesired
operation of the device.
The user is cautioned that this device should be used only as specified within
this manual to meet RF exposure requirements. Use of this device in a manner
inconsistent with this manual could lead to excessive RF exposure conditions.
The following statement must be included with all versions of this document
supplied to an OEM or integrator, but should not be distributed to the end user.
--This device is intended for OEM integrators only.
--Please See the full Grant of Equipment document for other restrictions.
--This device must be operated and used with a locally approved access point.
B002-08B

ZINWELL HD Wireless Video Transmission Product
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not be
co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provide with antenna installation instructions
and transmitter operating conditions for satisfying RF exposure compliance.
Full HD Video Wireless Module
The following regulatory and Safety notices must be published in
documentation supplied to the end user of the product or system incorporating
an adapter in compliance with local regulations, Host system must be labeled
with “Contains FCC ID: YG7RF31000M”, FCC ID displayed on label.
Version: 0.1
Date: 2010-09-14
7th, No. 512, Yuan Shan Road, Chung Ho City, 235,
TEL:+886 2 22251929 FAX:+886 2 22269654
Zinwell Corporation
Taipei County, Taiwan
http://www.zinwell.com.tw
CONFIDENTIAL
Page 3 of 12
B002-08B

ZINWELL HD Wireless Video Transmission Product
Full HD Video Wireless Module
1 Product Features
WHDI
Digital video: 24/ 30-bit RGB or YCrCb
Digital audio: I2S and SPDIF
Two-Wire serial bus slave interface
One interrupt line
Supports any uncompressed video resolutions, including:
HD: 720p, 1080i, 1080p, 576p, 480p
PC: VGA (640x480), SVGA (800x600), XGA (1024x768)
Audio:
Up to 3Mbps audio stream:
I2S: Two PCM channels (sampled up to 48 KHz x 24 bit)
SPDIF: Including AC-3, DTS
Strong 256-bit AES encryption
User-defined two-way channel with minimum 10 Kbps for data and control
Less than 1mSec latency between source and sink
Small mechanical footprint:
PCB integrated antennas
RF characteristics:
MIMO technology, using 5GHz unlicensed band.
No line of sight needed between transmitter and receiver. It has a range of
over 7 meters (LOS), suitable for almost any room.
14mW typical transmission power per transmitting channel.
Maximum 20mW transmission power per transmitting channel.
Power requirements:
3.3V (±5%), ~5.3W
Version: 0.1
Date: 2010-09-14
7th, No. 512, Yuan Shan Road, Chung Ho City, 235,
TEL:+886 2 22251929 FAX:+886 2 22269654
Zinwell Corporation
Taipei County, Taiwan
http://www.zinwell.com.tw
CONFIDENTIAL
Page 4 of 12
B002-08B