Zhone Technologies 1612-A2-xxx User Manual

Auto-connect feature will
automatically detect the first usable PVC and automatically detect PPPoE, PPPoA, and Bridge Protocol(with DHCP Server available)
Configurable as either a
Bridge or Router
IGMP v1/v2 support for
video deployments
Filter traffic based on
Destination or Source IP Address and MAC Addresses
Traffic Class Rules based
on Protocol, Source IP, Source Port, Destination IP, Destination Port,
802.1p
Single Click DSL test - Tests
Ethernet connection and ADSL Synchronization along with ATM OAM F5 segment pings and end-to-end pings.
Configured through
easy-to-use web interface
ADSL2+ 4Port Modem
6212-I3-xxx
ADSL2+ 4 Port Switch Bridge/Router
The 6200 ADSL2+ family of endpoints deliver the required performance for multimedia applications at very competitive price points. The 6200 ADSL2+ endpoints, in compact form factor, have been successfully used for residential, business, in-building deployments such as hotel/motel, temporary housing, and dormitory-campus installations for high-speed internet access (HSIA) and video-on-demand services.
The Zhone 6200 ADSL2+ endpoints are easily user-installed. The embedded web-based user interface is designed to simplify ADSL deployment. All products provide an Ethernet connection that is auto-sensing, eliminating the worry about connection cable type (straight-through vs crossover).
DELT or Dual End Loop Test, is a feature that is present the 6200 Family of ADSL2+ CPEs. DELT is primarily used for reactive tests on a loop after a modem has been deployed—either to help troubleshoot a line or to capture a baseline of loop characteristics at the time of installation. Because DELT is a dual-ended test, it requires equipment that supports the DELT feature at both ends of the copper loop. While this prevents DELT from being used on loops where no CPE has yet been deployed, DELT in turn offers a deeper set of loop tests, and can provide very valuable information on the condition of a copper loop.
Default settings make for a quick and easy installation that doesn't require any configuration.
The modem, when operating in router mode, support DHCP Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port forwarding, and static routing. For security, firewall functions including PAP/CHAP authentication and IP filtering are supported.
Technical Specifications
Dimensions
1.2" (3.0cm) High x 6.5" (16.5cm) Wide x 4.4"
(11.2cm) Deep
Weight
1.5 lbs (0.7 kg)
Power
100 VAC, 50 Hz
110 VAC, 60 Hz
220 VAC, 50/60 Hz
Interfaces
DSL Line: RJ11
Ethernet: 4 Port 10/100BaseT, Auto MDI/MDIX
ADSL2+ 4Port Modem
Standards Support
ATM Support
- ITU-T I.610 F4/F5 OAM Send and Receieve/Loop back
- Support for 8 PVC's
- RFC 1483/2684 (Bridged/Routed Ethernet over ATM)
Routing/Bridge Support
- Transparent Bridge Support
- DHCP Server/Relay/Client
- DNS Relay Agent
- Dynamic DNS Support
- DMZ support
- Static Routing
- RIPv1 and RIPv2
- Policy based QoS (TOS, 802.1p, Source/Destination IP Address, Source/Destination Port, Protocol)
- IGMP v1/v2
PPP Support
- PAP/CHAP authentication
- PPPoA
- PPPoE
Security
- NAT for Basic Firewall support
- Ingress and Egress Packet Filtering
- Parental Control
- MAC Filtering
- Stateful Packet Inspection
DELT support
Protocol Support
ANSI T1.413 (Full Rate ADSL)
ITU G.992.1 (DMT)
ITU G.992.2 (G.lite)
ITU G.992.3 (ADSL2)
ITU G.992.5 (ADSL2+)
ITU G.994.1 (G.hs)
ITU G.997.1
Annex L
Annex M
Management
Web-based Configuration GUI
CLI
Telnet Remote Management
FTP/TFTP firmware upgrade and configuration
backup/restore
Syslog Support
TR-069 Support
SNMP Support
UPnP Support
Regulatory Compliance
FCC Part 15, Part 68
CE
UL
TUV
RoHS compliant
Operating Requirements
Operating Temperature: 32° F to 104° F (0° C to
40° C)
Storage Temperature: –4° F to 149° F (–20° C to
65° C)
Humidity: 5% to 95%, non-condensing
Ordering Information
6212-I3-200 ADSL2+ CPE Router, 4 Port Ethernet Switch, N.A.
6212-I3-300 ADSL2+ CPE Router, 4 Port Ethernet Switch, U.K.
6212-I3-302 ADSL2+ CPE Router, 4 Port Ethernet Switch, EURO
6212-I3-304 ADSL2+ CPE Router, 4 Port Ethernet Switch, India
6212-I3-600 ADSL2+ CPE Router, 4 Port Ethernet Switch, Japan
2007/01/10 13:49:16
Loading...