Zhone Technologies 1611-A2-xxx User Manual

✓ Auto-connect feature will

automatically detect the
first usable PVC and
automatically detect
PPPoE, PPPoA, and Bridge
Protocol(with DHCP Server
available)

✓ Configurable as either a

Bridge or Router

ADSL2+ Single Port Modem

1611-A2-xxx

ADSL2+ Single Port Bridge/Router

✓ Filter traffic based on

Destination or Source IP
Address and MAC
Addresses

✓ Traffic Class Rules based

on Protocol, Source IP,
Source Port, Destination
IP, Destination Port,

802.1p

✓ Single Click DSL test - Tests

Ethernet connection and
ADSL Synchronization
along with ATM OAM F5
segment pings and
end-to-end pings.

✓ Configured through

easy-to-use web interface

✓ ADSL BER Test based on

idel cell bit error
protection

The 1600 ADSL2+ family of endpoints deliver the required
performance for multimedia applications at very competitive price
points. The 1600 ADSL2+ endpoints, in compact form factor, have
been successfully used for residential, business, in-building
deployments such as hotel/motel, temporary housing, and
dormitory-campus installations for high-speed internet access (HSIA)
and video-on-demand services.

The Zhone 1600 ADSL2+ endpoints are easily user-installed. The
embedded web-based user interface is designed to simplify ADSL
deployment. All products provide an Ethernet connection that is
auto-sensing, eliminating the worry about connection cable type
(straight-through vs crossover).

Default settings make for a quick and easy installation that doesn't
require any configuration.

The modem, when operating in router mode, support DHCP
Server/Relay/Client, NAPT, as well as RIP, dynamic routing, port
forwarding, and static routing. For security, firewall functions
including PAP/CHAP authentication and IP filtering are supported.

Technical Specifications

Dimensions

■ W (5.03in) x D(4.33in) x H(1.18in)

Weight

■ 0.33lbs

Power

■ Input 100 VAC, 50Hz

■ Input 110 VAC, 60Hz

■ Input 240 VAC, 50/60Hz

■ Output 5VDC 1A

Interfaces

■ DSL Line: RJ11

■ Ethernet: 1 Port 10/100BaseT, Auto MDI/MDIX

■ On/Off Power Switch

ADSL2+ Single Port Modem

Standards Support

■ ATM Support

- ITU-T I.610 F4/F5 OAM Send and
Receieve/Loop back

- Support for 8 PVC's

- RFC 1483/2684 (Bridged/Routed Ethernet over
ATM)

■ Routing/Bridge Support

- Transparent Bridge Support

- DHCP Server/Relay/Client

- DNS Relay Agent

- Dynamic DNS Support

- DMZ support

- Static Routing

- RIPv1 and RIPv2

- Policy based QoS (TOS, 802.1p,
Source/Destination IP Address,
Source/Destination Port, Protocol)

■ PPP Support

- PAP/CHAP authentication

- PPPoA

- PPPoE

■ Security

- NAT for Basic Firewall support

- Ingress and Egress Packet Filtering

- Parental Control

- MAC Filtering

- Stateful Packet Inspection

Protocol Support

■ ANSI T1.413 (Full Rate ADSL)

■ ITU G.992.1 (DMT)

■ ITU G.992.2 (G.lite)

■ ITU G.992.3 (ADSL2)

■ ITU G.992.5 (ADSL2+)

■ ITU G.994.1 (G.hs)

■ Annex L

■ Annex M

Management

■ Web-based Configuration GUI

■ CLI

■ Telnet Remote Management

■ FTP/TFTP firmware upgrade and configuration

backup/restore

■ Syslog Support

Regulatory Compliance

■ FCC Part 15, Part 68

■ CE

■ UL

■ TUV

■ RoHS compliant

Operating Requirements

■ Operating Temperature: 32F to 104F (0C to

40C)

■ Storage Temperature: -4F to 149F (-20C to 65C)

■ Humidity: 5% to 95%, non-condensing

Ordering Information

1611-A2-200 ADSL2+ CPE Router, 10/100BaseT, N.A.

1611-A2-302 ADSL2+ CPE Router, 10/100BaseT, EURO

2008/06/11 08:21:50