ZETTLER AZ830 Datasheet

p

`

AZ830

POLARISED DIP RELAY
SINGLE SIDE STABLE

FEATURES

Low profile for compact board spacing
DC coils to 48VDC
High sensitivity capacity, 100mW pickup
Life expectancy to 100 million operations
High switching capacity, 60W 125VA
Fits standard 16 pin IC socket
Epoxy sealed for automatic wave soldering and cleaning
Meets FCC Part 68.302 1500V lightning surge
Meets FCC Part 68.304 1000V dielectric
UL file E43203, CSA file LR36664

CONTACTS

Arrangement DPDT (2 Form C)

Bifurcated crossbar contacts
Ratings Resist i ve load:

Max switching power - 60W or 125VA
Max switched current - 2A
Max Switched voltage - 250VDC or 300VAC
Max carry current - 3A

Rated Load 2A at 30VDC
UL 1A at 120VAC

Material Silver alloy. gold clad. Si l ver pal l adi um, gold clad

available upon request (not recommended for
current greater than 1A)

Resistance <50 milliohms initially

COIL

Power
At Pickup Voltage Standard coil 200mW

(typical) Sensitive coil 100mW
Max Continuous 1.0W 20°C ambient

Dissipation 0.9W 40°C am bi ent

Temperature Rise Standard 38°C at nominal coi l vol tage

Sensitive 21°C at nomi nal coil voltage

Max Temperature 115°C

GENERAL DATA

Life Expectancy Minimum operations
Mechanical 1x10
Electrical 1x10

Operate Time (typical) 3ms at nominal c oi l voltage
Release Time (typical) 2ms at nomi nal coil voltage

(with no coil suppression)
Capacitance Contact to contact : 1.0pF

Contact set to contact set : 1.0pF
Contact to coil : 2.0pF

Bounce (typical) At 10mA c ontact current

1.5ms at operate NO side

2.5ms at operate NC side

Dielectric Strength 1500 Vrms coil to contact
(at sea level for 1 min) 1000 Vrms between contact sets

1000 Vrms across contacts
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric

Insulation Resistance 1000 megohms min at 20°C. 500VDC,
50% RH

Dropout Greater than 10% of nominal coil voltage
Ambient Temperature At nominal coil voltage

Operating Standard -40°C to 70°C

Standard -40°C to 85°C

Storage Both -40°C to 115°C
Vibration 0.062” DA at 10 – 55 Hz
Shock 40g
Enclosure PBT Polyester
Terminals Tinned copper alloy, PC
Weight 5 grammes

8

operations

5

at 2A 30VDC or 1A 125VAC

2x106 at 1A 30VDC or 0.5A 125VAC

NOTES

1. All values at 20°C

2. Relay may pull in with less than ‘Must Operate’ value

3. Relay has fixed coil polarity

4. For complete isolation between the relay’s magnetic f i el ds, it is
recommended that a 5mm space be provided between adjacent rel ays.

5. PCB layout viewed towards terminals

6. Relay adjustment may be affected if undue pressure is exerted on
relay case

ecifications subject to change without notice

7. S

Logistic Design (UK) Limited

Unit 3 Eagle Centre W ay, Sedgwick Road Tel [phone]
Luton LU4 9US, United Kingdom Fax [phone]

www.zettlerrelay.com

[e-mail]

LDZR201000