Zenoah EHT603D User Manual
848D3N93B1 (709)
eHT753S
eHT603D
HEDGE TRIMMERS
September 2007
NOTE :
1. Use ZENOAH genuine parts specified in the parts list for repair and/or replacement.
2. ZENOAH does not warrant the machines, those which have been damaged by the use of any parts
other than those specified by the company.
3. When placing orders of parts for repair and/or replacement, check if the model name and the serial
number are suitable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list may change due to improvement.
5. The parts for the machine shall be supplied within ten (10) years after the machine is discontinued.
[It is possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. And it is also possible that some
parts may be available even after the limit of ten (10) years.]
APPLICABLE SERIAL NUMBERS :
eHT753S : 50300000 and up
eHT603D : 50300000 and up
PARTS LIST
Fig.1 DRIVE UNIT
eHT753S
Q’TY
Key# PART NUMBER DESCRIPTION NOTE
/UNIT
1 848D3L6501 BLADE ASS’Y 1
2 848D3L66A0 • PLATE, upper 1
3 848D3L66B0 • PLATE, lower 1
4 848D3L65A0 • BLADE, lower 1
5 848D3L65B0 • BLADE, upper 1
6 848D3L66C0 • SPACER 9
7 848D3L66K0 • SPACER 4
8 848D3L66H0 • SCREW 4
9 01252-30520 • BOLT 3
10 01252-30525 • BOLT 2
11 848D3L66J0 • NUT 5
12 848D3L66D0 • PLATE 1
13 848D3L66E0 • BRACKET 1
14 848D3L68A0 • COVER 1
15 T4503-12115 PLATE 1
16 T4521-11330 BOLT 4
17 848D306112
GEARCASE COMP., upper
1
18 06004-06001 • BEARING 2
19 04065-02812 • RING 1
20 848D3061B0 • PLATE 1
21 T4543-42320 • BOLT 2
22 848D306121
GEARCASE COMP., botom
1
23 848D3061B0 • PLATE 1
24 T4543-42320 • BOLT 2
25 T4543-21220 GASKET 1
26 848D305111 DRUM 1
27 848D3062A0 GEAR, drive 1
28 T4543-42210 GEAR, driven 1
29 T4543-42100 ROD ASS’Y 2
31 3199-13350 FITTING 1
32 T4543-42410 FELT 1
33 8488451600 BOLT 6
34 01252-30625 BOLT 3
35 T4503-31101 HANDLE-R COMP. 1
36 T4503-31210 ABSORBER 4
37 T4503-31220 HOLDER 2
38 T4503-31230 CAP 2
39 T4503-32100 HANDLE-L COMP. 1
40 6420-14303 LEVER ASS’Y 1
41 T3040-14511 COLLER 1
42 T4503-83100 CABLE COMP. 1
43 6542-14510 TUBE 1
44 1565-72311 CLAMP 1
45 T4503-31210 ABSORBER 4
Q’TY
Key# PART NUMBER DESCRIPTION NOTE
/UNIT
46 T4503-32220 PIPE 2
47 T4503-32230 WASHER 2
48 01252-30535 BOLT 2
49 848D3N90S0 LABEL 1
50 3320-91140 WRENCH 1
51 09007-00425 WRENCH 1
53 3540-91120 SPANNER 1
Fig.1 DRIVE UNIT
eHT753S
Fig.2 DRIVE UNIT
eHT603D
Loading...