Zenith PV5263RK, PV4663RK Owner’s Manual

iAviso para nuestros clientes de habla hispana:

consulte la informaci6n que aparece al final de este manual!

THE QUALITY GOES IN BEFORE TI--IENAME GOES ON®

Projection Color TV •

MTS Stereo Audio"

Surround Sound

Closed Captions

recycled paper

50 percent

Return the Product Registration

Card, and your TV could be free!

WARNING:

TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE

PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT FXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

The lighming flash with arrowhead symbol, within an ecluilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of

sufficient magnitude to constitute a risk of electric shock to persons.

_]k The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accornpanying the appliance.

Safety Tips

Refer to the "Safety Tips" booklet that came with your product for important safety considerations.

Power-Cord Polarization

This product is equipped with a polarized alternating- current line plug (a plug having one blade wider than the

other.) This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the

plug fully into the outlet, try reversing the plug. If the plug should still fai! to fit, contact your electrician to replace

you!; obsolete outlet. Do not defeat the safety purpose of the polarized plug.

Note to Cable TV S,tstem Installer

This reminder is provided t_ call the cable TV system installer's attention to Article 820-40 of the NEC that

provides guidelines for prol_er grounding and, in particular,

specifies that the cable gJ'onnd shall be connected to the grounding system of the building, as close to the point of the cable entry as practical.

CAUTION

To prevent electric shock, match wide blade of plug to wide slot, fully insert.

ATTENTION

Pour _viter les chocs dlectriques, introduire la lame la plus

large de la fiche dans la iao:ne correspondante de la prise et pousser jusqu'au fond.

CONTENTS

INTRODUCTION

'Welcome ......................................... ii

][nstallation Considerations ........................... ii

CONNECTIONS FOR YOUR TV

]Locations of User Items ............................. I- 1

Connection Center on Back of TV .................... 1-2

Other AiV Jacks on TV ............................. 1-2

Step 1. Make Basic Connection to TV ................. 1-3

Step 2. Make VCR Connections to TV ................. 1-4

Step 3. Make Super-VHS VCR Connections to TV ....... I-5

Step 4. Make A/V Connections to Auxiliary

A/V Jacks (VIDEO 3 IN or S-VIDEO 2 IN) .......... I-5

Step 5. Make Connections to Monitor Out Jacks ......... 1-5

Step 6. Make Surround Sound Connections to TV ........ 1-6

Step 7. Make External Speaker Connections to TV ....... 1-6

Step 8. Make Audio Connection to Stereo Amplifier ...... 1-7

THE FIRST TIME YOU OPERATE YOUR TV

Step 1. Connect the Power ........................... 2-1

Step 2. Select Your Viewing Source ................... 2-1

Step 3. Use Auto Program ........................... 2-1

Step 4. Time Functions ............................. 2-1

Step 5. Use Other Options ........................... 2-2

REMOTE CONTROL MODEL SC3820

"FV Operations .................................... 3-1

VCR Operations .................................. 3-2

TV and VCR Operational Notes ...................... 3-3

Preparation for Use ................................ 3-3

Installing Batteries ................................. 3-3

REMOTE CONTROL MODEL MBR3430

Operation ........................................ 4-1

Choose the Operating Mode ......................... 4-1

TV Operations .................................... 4-2

VCR Operations .................................. 4-3

Cable-TV Operations ............................... 4-4

Preparation for Use ................................ 4-5

Installing Batteries ................................. 4-5

Programming Brand Codes .......................... 4-6

TV, VCR and Cable-TV Operating Codes .............. 4-7

QUICK REFERENCE TO ON-SCREEN MENUS

Available Menus .................................. 5-1

Summary of Menu Items ............................ 5-1

Menu Operation Example ........................... 5-3

SOURCE MENU

Source Selection .................................. 6-1

Source Identification ............................... 6-1

SETUP MENU

Auto Program .................................... 7-1

Ch. Add/Del ....................................... 7-1

Ch. Labels ....................................... 7-2

Tuning Band ..................................... 7-3

Auto Tuning ...................................... 7-3

Source ID ........................................ 7-3

Clock Set ......................................... 7-4

CaptiOns .......................................... 7-4

Projo Setup ....................................... 7-5

AUDIO MENU

Bass ............................................. 8-1

Treble ............................................ 8-1

Balance .......................................... 8-1

Audio ............................................ 8-1

SEQ ............................................. 8-1

Surround ......................................... 8-1

VIDEO MENU

Contrast .......................................... 9-1

Brightness ........................................ 9-1

Color ........................................... 9-1

Tint ............................................. 9-1

Sharpness ........................................ 9-1

Color Temp ...................................... 9-1

Video Filter ...................................... 9-1

Auto Flesh ....................................... 9-1

Picture Pref ...................................... 9-I

PIP MENU

Ch. Guide ....................................... 10-1

Ch. Review ..................................... 10-2

PIP Source ...................................... 10-2

PIP Color ...................................... 10-3

PIP Tint ......................................... 10-3

PIP Size ....................................... 10-3

PIP OPERATION AND COI_NECTIONS

PIP Overview ..................................... 11-I

Typical Connections ............................... 11-1

How to Select Main Picture & PIP Source ............. 1I-3

PIP Functions ................................... 11-4

MAINTENANCE AND TRO1LJBLESHOOTING

Caring for Your TV ................................ 12-1

Extended Absence ................................ 12-1

TV Picture Interference ............................ 12-I

Before Calling for Service .......................... 12-2

Product Registration Card Recommended Accessories For Your TelevMon

Aviso para nuestros clientes de habla hispanLa Your Zenith Warranty

HOW TO USE YOUR OPERATING GUIDE

THIS OPERATING GUIDE DESCRIBES A FAMILY OF TV MODELS. SOME MODELS tIAVE FEATURES THAT ARE NOT PROVIDED ON OTHER MODELS, SUCH AS AUXILIARY JACKS OR TWO REMOTE CONTROLS. DIFFERENT

CONTROL PANELS AND REMOTE CONTROLS MAY BE USED FROM MODEL-TO-MODEL. REFER TO THE APPLI- CABLE SECTIONS OF THIS OPERATING GUIDE FOR THE FEATURES AND ITEMS PROV [DED WITH YOUR TV.

,n*-o i

WELCOME

INTRODUCTION

Welcome into the family of Zenith Color Television owners. This guide provides instructions on how to operate your new TV. It is supplemented by a booklet containing Safety Tips. We urge you to read these publications carefully so that you

will receive full enjoyment from your new Zenith TV for many years to come.

Your new Zenith projection TV has been designed and built to give you the very best in quality, features and performance. There are many regional Zenith distributors and thousands of distributor-approved Zenith service centers throughout the U.S., Canada and Mexico who can attend promptly and effec-

tively to ordinary service needs. If you should have an unusual performance or service problem

that cannot be satisfactorily resolved by your distributor- approved Zenith service center, contact the regional Zenith dis-

tributor in your area, or write:

INSTALLATION CONSIDERATIONS

Before you install your TV... Ventilation -- Proper ventilation keeps your TV

running cool. Air circulates through perforations

in the back and bottom of the cabinet. Do not block these vents or you will shorten the life of

your TV.

_.iPower Source Your TV is designed to

on normal household current, 120 volt 60 Hertz AC. Do not attempt to operate it on DC current.

Power Cord -- Your power cord has a polarized plug as required by Underwriters' Laboratories. It has one regular blade and one wide blade and fits only one way into a standard electrical outlet. If the blades will not enter either way, your outlet is

very old and non-standard. A new outlet should be installed by a qualified electrician.

Safe Operation -- Your TV is manufactured and tested with your safety in mind. However, unusual

stress caused by dropping or mishandling, expo- sure to flood, fire, rain or moisture, or accidental

spilling of liquids into the TV, can result in poten- tial electrical shock or fire hazards. If this hap- pens, have your TV checked by a service technicmn before using it again.

operate

Zenith Electronics Corporation Customer Servi,:zeDepartment

1000 Milwaukee Avenue Glenview, IL 6(1625-2493 Telephone: (847) 391-8752

Mon-Fri, 8:00 a.m. - 4:30 p.m. Central Time

Send the model number, serial number, and date of purchase or original installation, with a full explanation of the problem

and the service history. We will welcome,,the opportunity to

look into your specific question or problem and to be of assis-

tance in resolving it promptly. The model and serial numbers of your new TV are located on the

back of the TV cabinet. For your future convenience and protec- tion, we suggest that you recorJ these numbers here:

Model No.

Serial No.

Please read and observe each safety point in the "Safety

Tips" folder when installing and using your TV. VIDEO GAMES AND OTIIER FIXED

PATTERN DISPLAY CAUTION -- I5you use your TV for

video games, teletext or othm fixed displays, avoid setting the BRIGHTNESS control for at, excessively bright picture. A bright, fixed pattern, if used for long periods of time, can re- sult in a permanent imprint on the TV picture tube. You can re- duce this possibility by alternating the use of the fixed pattern

display with normal TV picture viewing, by turning down the CONTRAST control for sustained fixed pattern use, and by

turning oft the fixed pattern display when nol in use. PLUGGING IN YOUR 'rv -- Be sure to plug your TV into

an "unswitched" AC power source. The "switched" AC out- lets found on some video ,equipment will not continue supply-

ing power to the TV once the equipment is turned off. If the power to the TV is interrupted, you will have to reset the clock

in the TV to the current time. PICTURE SCREEN CLEANING -- Use a soft cloth mois-

tened with warm water and rub lightly in the soiled areas of the screen. DO NOT USE A FISSUE OP, PAPER TOWEL,

AS THESE MAY DAMAGE SURFACE. Wipe only in the

vertical (up/down) direction (along the grooves). If there is a dirt buildup, a mild solution of warm wa:er and Ivory dish- washing detergent may be:used. Use dr), soft cloth to dry the screen. Care should be taken to avoid scratches or damage to

the screen surface. NOTE -- The TV screen is easily damaged. Avoid acciden-

tal contact with the screen.

TVWEPRO3 ii

CONNECTIONS FOR YOUR TV

LOCATIONS OF USER ITEMS

REMOTE CONTROL

CONTROL ]?ANEL (On top ofT'V)

BUILT-IN SPEAKERS

to operate TV) (Point toward screen

Front View of TV

VIDEO 3/S-VIDEO 2 Auxiliary A/V Input Jacks

(Some models)

Connection Center

Fixed A/V Output Jacks (Some models) []

Place VCR Shelf Here

Power Cord Entry

Rear View of TV

r,3s-o 1 _ 1

CONNECTIONS FOR YOUR TV

CONNECTION CENTER ON BACK OF TV

ANT/CABLE 1 or ANT/CABLE 2 75-ohm antenna-type connections to your

TV. Attach your antenna, cable-TV line or VCR to either of these jacks.

LOOP OUT TO DECODER

Use this output to route the cable-TV signal back:to the decoder supplied by :your cable-TV system.

VIDEO 1 IN or

VIDEO 2 IN l Baseband audio and video

input from a VCR or other A/V component.

VIDEO 1 LOOP OUT

Use these jacks to send the

incoming audio and 'video signals (from VIDEO 1 IN) to another A/V component, such as a second VCR.

--1

LOOPOUT ANT/CABLE2

TODECODER

VIDEO r_AUDIO_

VIDEO1 IN

RI LI

LOOP OUT

TOEXTERNALAMPORSPKR

INT _ [- EXT

A[qT/CABLE1 _]

VIDEO2 IN

VIDEO r- AUDIO

R L

S-VIDEO1 IN

S-VIOEO R

EXTERNAl, AMP Standard phoao jack cormectors for output

to the customer's audio amplifier or Terminals for connecting: external speakers.

,/_,.S._, VARIABLE_i'ic 1 ,_, AUDIO

RIGHT LEFT

SPEAKERS

L SURROUNDSPKRS

OUTPUT

SPEAKERS EXT/INT

EXT position: TV's speakers are off.

INT position: TV's speakers are on.

SUIGROUND SPEAKER Terminal connectors for

output to optional surround sound speakers.

S-VIDEO 1 IN Audio and video input

from a Super-VHS VCR.

Some connections require additional cables or equipment which are not supplied with the TV.

OTHER A/V JACKS ON TV (Some Models)

S-VIDEO 2 IN Audio and video input from a Super-VHS VCR.

I VIDEO 3I_N S-VIDEO 2 IN

, -

AUDIO INPUT VIDEO INPUT

VIDEO 3 IN Baseband audio and video input from a camcorder or other

A/V component.

MONITOR OUT

AUDIO

MONITOR OUT Fixed-level baseband audio arid video output 1:0 a

monitor or other A/V component. Program currently being watched on your TV is provided at these jacks.

2738-o 1 -- 2

CONNECTIONS FOR YOUR TV

STEP 1. MAKE BASIC CONNECTION TO TV

Select the hook up that best fits your needs. See the following diagrams.

NOTE: The antenna may be connected to the ANT/CABLE 2

jack, however, connecting to the ANT/CABLE 1jack may

produce a better picture in weak signal areas.

Antenna

...... I__ _

Flat Wire 300 ohm

Round Wire

75 ohm

300/75 ohm

Adaptor

_--_ _ VARIABLE

RIGHT LEFT

TO EXTERNAl_AMP ORgPKR

SPEAKERS

L00P0uTA.t/cAsLE2AWTIcxsLel'_mtr_eXT Il'o'll!Nle

viDeo1IN video2iN / !

VIDEO r--AUDIO_ VIDEO ;- AUOlO-_ I I r_ I_Tl

LOOP OUT S-VIDEO R L SURROUND SPI(RS

' L,%_!'"

OUTPb'T

AUOlO

Antenna

VCR

t __'=-'__b '7"1ANtE"N'I

I ,"_k outl I

Ghannel 3/4

_-',_ :x, vAR_,_

r_o ] ( {I o I I AUOlO

_ _ [ TO EXTERIqALAMp OR SPIR

LQOPOUTANT/CABLE2lUtt/cXetE1im_/_ exT II'o'l II I_

TOUE_OOER__ ___ I _,. i,_tI

VIDEO1in vineo2 m i ! i I

YiOE0 mAUDIO-1 VIDEO r--AOel[I-_ II_ll.

/ R LI _r___ L_i I.o. I1'_1®

--_ -_ -- _ S-VIDEO1 IN I _

LOOPOUT S-VIQEO B t SURROUNO SPIll

Cable-TV (Direct Connection

toTV)•

2Tas-o 1-- 3

Cable-TV (Direct Connection

Through VCR to TV)

VCR

I 'q ANTENNA

Video

RIGHT LEFT

TOEI[TERNAI. lIMP OR IPKR

SPEAKER!I

LOOP OUT ANT/CA61_E2 ANT/CABLE 1

TODECQDER

VIDEOllN VIDEO21N

VIDEO -AUOlO_ i VIDEO r- AUDIO-q

LOOPOUI S-VIDEO L SURROUND SPKRS

iNT"'1 r EXT

(continued on next page)

3/4

i AUDIO

OUTPUT

CONNECTIONS FOR YOUR TV

STEP 1. MAKE; BASIC CONNECTION TO TV

DECODER/ CONVERTER "1 Video t VCR

Cable-TV Direct

._-_ / Channel 3/4 I ANTENNA

'" r-i_'

'i_Sa';', ,'_" / 7 =o,o

i_ ' TO E[IERI4AL.IMP ORSPill

LQOPOUT AHT/CABLI!2 J'_NT/CADLE1 INT_ r E),'T

TODECOOER _

VIDEO 1 IN VIOEO 2 !IN

VIDEO r AUDIO _ VIDEO _AUDIO_

SPEAKERS

OUTPI/T

LOOPOUT

L SURROUND SPKRS

STEP 2. MAKE VCR CONNECTIONS TO TV

If'you have a stereo VCR, you must make the A/V

connections shown in order to hear stereo sound while playing a tape.

STEREO VCR

OUTPUTS

VIDEO R AUDIO L

ANT/CABLE.

VluL;,

RIGH'[

LOOPOUT S-VIDEO

STEREO VCR

\'IDEO R L

Connections for second stereo VCR or alternate

connections for first VCR.

OUTPUTS

3_05_o

' R Li

R LI

LOOPOUT

S-VIDEO R L SU£BOUNDSPKR

?738-0 l --4

S-VIDEO 1 IN

C i ili

CONNECTIONS FOR YOUR TV

STEP 3. MAKE SUPER-VHS VCR CONNECTIONS TO TV

SUPER-VHS VCR

STEP 4. MAKE NV CONNECTIONS TO AUXILIARY NV JACKS (VIDEO 3 1INOR S-VIDEO 2 IN)

Stereo Camcorder

STEP 5. MAKE CONNECTIONS TO MONITOR OUT JACKS

StereoVCR or Camcorder

INPUTS

Wr_EeOEe _uo_o L 7 Monitor

_1 . / -,

VIDEO 3 IN S-'¢IOEO 2 IN

.../' Super-VHS V'CFI

,oD,oI ,,_,-,,r

RIGHT _-J___ !_ Jill jm,-, . .... .. "

2738-0 1 _5

CONNECTIONS FOR YOUR TV

STEP 6. MAKE SURROUND SOUND CONNECTIONS TO TV

1. Mount and connect the optional surround sound speakers by following the instructions provided with

the speakers.

2. Use the SURROUND option in the AUDIO Menu to adjust the volume of the surround speakers.

The level of the surround sound varies relative to the difference between the left- and right-channel stereo

signals.

NOTE: MAKE SUFIE 7V IS OFF

WHILE ,CONNECTING :SPEAKERS.

i AUD_

_ _ T_O EXTEflZ_r. AIIp O_ SPtA

LOOPOUT_rX_tEZ A,T_JUlt.E1i nrrr_ m" ILK;":,:",:,.

rD.c00,, __ t _ I1_ I_1

¥iDEOIIN I mEOZ" Eli___II I

HOED r-igoIo_ VIDEO r- AUDIO_ J II\_/] _ [ " I

LOOPOUT S-VIDEO SURR RSI

I SPEAIERS [-P::_:_::::_:::_::;(7

Surround

Speaker

(8 ohm}

Surround

Speaker

(8 ohm)

STEP 7. MAKE EXTERNAL SPEAKER CONNECTIONS TO TV

1. Place the SPEAKERS EXT/INT switch on the TV in 3. Place the SPEAKERS EXT/INT switch on the TV in the INT position, the EXT position.

2. Connect the two external speaker terminals.

NOTE: MAKE SURE TV IS OFF WHILE CONNECTING SPEAKERS.

Right

Speaker

(8 ohm)

@@@

LOOP OUT ANTiCASII:2 ANT/CABLE1 INT7 r- E]rT

TO DECODER

VIDEO 1 IN VIDEO 2 IN

VIDEO ;_AUDIO_ VIDEO r_ AUDIO_

At ti R I.

TOEXTERNAl. AMP OR SrKR

SPEAKERS

S'VIOE01 IN _ (_

@#®

LOOPOUT

+73s-o 1 --6

I(RSI-VIDE0 SURR U

\ .,"

Left

Speaker

{8 ohm)

CONNECTIONS FOR YOUR TV

',STEP 8. MAKE AUDIO CONNECTION TO STEREO AMPLIFIER

Using an External Amplifier with Speakers While the TV's Speakers are OFF'.

I. Place the SPEAKERS EXT/INT switch on the TV in

the INT position (TV's speakers are ON).

2. Turn the TV ON. Increase the volume level of the TV until the sound just starts to distort (sound bad).

3. Place the SPEAKERS EXT/INT switch on the TV in the EXT position (TV's speakers are OFF).

,4. Turn the external audio amplifier ON. Adjust the

volume level of the audio amplifier for the highest level you will need for your listening pleasure.

5. Adjust the volume level of the TV for the normal listening level as heard through the speakers of your audio amplifier.

.......@ + +

::: :' : TO EXTERNAL AMP ORSPI(R

ToLOOPDEcODEROUTANT/CABLE2 ANT/CABL£1 INT_i- EX'T

VIOEO1 IN VIDEO2 iN

@_@__@_VlO[O F- AUDIO-1 VIDEO r- AUDIO_L _iO

RI I R

,I LL S-V|DEO 1 IN

LOOPOUT S-¥1DEO R

SPEAKERS

Using an External Amplifier with Speakers; While the TV's Speakers are ON.

1. Place the SPEAKERS EXT/INT switch on the TV in

the INT position (TV's speakers are ON).

2. Turn the TV ON. Increase :the volume+ level of the TV

until the sound just starts to distort (_;ound bad).

3. Turn the external audio amplifier ON. Adjust the volume level of the audio amplifier for the highest

level you will need for your listening pleasure.

4. Adjust the volume level of the TV for the normal listening

level as heard through the speakers of the TV.

NOTE: If the volume of the internal TV speaker; is set too

low, you may hear undesirable noises througl_Lthe speakers

connected to your audio amplifier

AUDIO

OUTPUT

_ VARiAJIL£

L SURROUHOSPKRS

NOTE: MAKE SURE "IV IS OFF

WHILE CONNECTING EXTERNAL AMP.

Back of Customer's

Stereo Amplifier

SPKR OUTPUT

L R

L,. _-=j

'+++]lij

To External

Speakers

:z73s-o 1 -- 7

THE FIRST TIME YOU OPERATE YOUR TV

STEP 1. CONNECT THE POWER

A. Plug: your TV into an unswitched AC power source. B. Turn the TV ON by pressing OFF-ON.

STEP 2. SELECT YOUR VIEWING SOURCE

A TV source refers to the equipment connected to the TV that supplies the picture and sound to your "IV. You select the viewing source by using the SOURCE MENU.

NOTE: The antenna or cable must be connected to the TV before using AUTO PROGRAM to find available channels.

To Access SOURCE MENU

1. Press SOURCE on the remote control to view the SOURCE MENU.

2. Press SOURCE repeatedly until the desired source is highlighted.

3. Press ENTER to return to normal viewing.

Do not plug TV into switched outlet

on cable-TV decoder or VCR

c;DUREE

* Some models only.

[ANT/CABLE "1

ANT/CABLE 2 VIDEO 1

VIDEO 2 S-VIDEO 1

VIDEO 3 -_,_ S-VIDEO 2 -x'-

STEP 3. USE AUTO PROGRAM

AUTO PROGRAM finds all available channels and stores them in the memory of the TV for use by CHANNEL (CH)

Up/Down. Use AUTO PROGRAM only when you first install your TV, or when you permanently change the

connections to the "FV. For example, when you replace the antenna with a cable--TV system.

NOTE: AUTO PROGRAM can only be used with ANT/ CABLE 1 or 2 Source selection.

To Use AUTO PROGRAM

1. Press MENU on your remote control repeatedly until

the SETUP MENU appears.

2. Press SELECT (SEL) UP/DOWN to highlight Auto Program.

3. Press ADJUST (ADJ) Left/Right to start Auto Program.

4. Use AUTO PROGRAM independently for each AN- TE.NNA or CABLE signal source connected to your TV. Select one source by using the SOURCE MENU

STEP 4. TIME FUNCTIONS

Set Clock In TV

1. Press Menu until the SETUP MENU is selected.

2. Press SELECT (SEL) to highlight CLOCK SET then use the number buttons on the remote to enter the

correct time.

3. Select AM or PM using the TIMER key on the remote.

4. Press ENTER (ENT) to start the clock.

EAUTO PROGFIAM J

CH. ADD/DEL CH. LABELS

I-UNING BAND AUTO TUNING

5ETIJP

Setup Menu with Auto Program Hi_,hlighted

(ANT/CABLE 1 or 2) and use AUTO PROGRAM. When completed, select the other source and use

AUTO PROGRAM again.

When Some Channels Are Not Found AUTO PROGRAM finds only active channels and stores

them in the favorite channel memory. You can add channels to those stored in memory by using CH. ADD/DEE

SOURCE ID (;LOCK SET

CAPTIONS

PROJO SETUIP

IAUTOPROGRAM

I CH.ADD/DEL

CH.LABELS

TUNINGBAND

AUTOTUNING SOURCEID

CLOCKSET

CAPTIONS

] [ 10:00AIVI

2738-C 2- 1

Selecting Clock Set

(continued on next page)

THE FIRST TIME YOU OPERATE YOUR TV

To Use Sleep Timer

1. Press TIMER to view the SLEEP TIMER screen.

2. Press TIMER repeatedly until you reach desired shut-

offtime.

One minute before the TV shuts off, the GOOD NIGHT display appears on the screen. At this time you have a choice

of the following three actions.

1. Do nothing. The TV will shut off in one minute. The display will count off the remaining seconds.

2. Remove the GOOD NIGHT display by pressing ENTER. The TV will still shut off in one minute.

3. Delay tile shut off by pressing TIMER to select a new shut-off time.

To Use ON/OFF Timer

1. Press TIMER and then MENU on the remote to view

the ON/OFF TIMER screen.

2. Press SELECT (SEL) to highlight ON TIME. Use the number keys on the remote to enter the time for the

TV to turn on. Press TIMER to choose AM or PM.

3. Press SELECT (SEL) to highlight OFF TIME. Use the number keys on the remote to enter the time for

the TV to turn off. Press TIMER to choose AM or PM.

4. Press SELECT (SEL) to highlight TIMER. Use AD-

JUST (ADJ) on the remote to turn TIMER ON or OFF. NOTE: A time must be set in either the ON TIME

or OFF TIME before you can turn the TIMER ON.

5. Press ENTER (ENT) to return to normal viewing. NOTE: The ON/OFF Timer can not be used until after the

television's clock is set.

0:15

_ SLEEP TIMER ---1

GOOD NIGHT

_ SLEEP TIMER ---1

0:58

To Cancel the SLEEP TIMER You can cancel the SLEEP TIMER by setting the SLEEP

TIMER status to OFF. NOTE: The SLEEP TIMER rese_i:sto OFF when you_rn off

the TV.

--- ON/OFF TI_,tER--

-> ON TIME 11::51 PM

OFF TIME 12:O0 PM TIMER ON

ON/OFF Timer

STEP 5. USE OTHER OPTIONS

You may ,,Cantto use the following options:

• Program the channels accessed when using CHANNEL Up/Down. Refer to CH. ADDiDEL option for details.

• Add labels (such as NBC and ABC) to the Channel/Time display. Refer to CH. LABELS option for details.

27s6-o 2--2

REMOTE CONTROL MODEL SC3820

TV OPERATIONS

The following functions and operations apply to Zenith TV The remote control must be in the TV mode to operate your models built after 1981. TV. Press MODE to select the TV mode. _,?heTV indicator

lights when you are in the TV mode.

MODE

Used to select the TV mode of operation.

Lights when TV mode of operation is selected.

CC (Closed Captions) Used to view closed captions

broadcast with some television programs.

MENU, SELECT and ADJUST Used with on-screen menus to see menu, select an option, and

adjust that option.

Numbered Buttons Used to select a TV channel.

Point toward your TV.

® ® ® ®® ®

OFF-ON/

OFF/ON Used to turn TV ON or OFF.

:SO URCE

Used to display the menu of TV sources for some TVs. Press again

to step through the source sek,ctions. On some TVs, press to

select AUX (Auxiliary) channel. FLASHBK (Flashback)

Used to return 1:othe last TV channel you were watching.

,CHANNEL Up/I)own :Usedto sequence through the TV

charnels.

ENTER Used to view the Channel/Time

Display or to remove any on- screen menu or display.

®® ®

MUTE

MEMORY

RECORD STOP PAUSE SEARCH

REW PLAY F FWD TVIVCR

'VOLUME Up!Down

!Used to adjust the TV's volume.

MUTE Used to turn off sound while the

picture remains. Press again to restore the sound.

'rIMER

Used to activate the: SLEEP TIMER. Press repeatedly to select

Jes:i,red turn-off time.I I

2738-O 3 -- 1

REMOTE CONTROL MODEL SC3820

VCR OPERATIONS

The following functions and operations apply to Zenith VCR models built after 1991.

For complete details on how to operate your Zenith VCR, refer to the operating guide supplied with it.

The remote control must be in the VCR mode to operate your VCR. Press MODE to select the VCR mode. The VCR

indicator lights when you are in tl:_,eVCR mode.

MODE Used to select the VCR mode of

operation.

VCR Lights when VCR mode of

operation is selected.

MENU, SELECT, ADJUST

and QUIT

Used with on-screen menus and programming options of the VCR.

See VCR operating guide for details.

Numbered Buttons Used to select a TV channel through

the VCR. Also, used to set the

timer in the VCR, and to enter

programming information.

ENTER

Used with thenumbered buttons to select a TV channel through the VCR.

Used to set timer during programming.

MEMORY Used to activate the COUNTER

MEMORY feature.

Point toward your VCR.

ADJ _ ADJ _:_

SELECT

®® ® ®®®

®®®

_._ENTER )

RECORD STOP PAUSE SEARCH

CE) (EE) L..J

REW PLAY F FWD TVNDB

QUIT

SOURCE

FLASHBK

IAI

CHANNEL

Ill

IAI

VOLUME

IV'l

OFF/ON

J Used 'l:oturn VCR ON or OFF.

FLASHBK (Flashback) Used during VCP playback to

J view :he channel tuned by the

VCR.

Used to sequence _arough channels

on the VCR.

CHANNEL Up/Down

TIM ER Activates TIME RECORD on

some VCRs. See the: VCR operating guide for details.

TV/VCR

Used to select the source of the programs seen on the TV. Switches

the VCR between TV mode and VCR mode. TV lVlode: Channels are selected

through the TV. VCR Mode: Channels or tape operation are se:iected through the

VCP.

:Tss-o 3 -- 2

RECORD, STOP, PAUSE, SEARCH, REW, PLAY and

F FWD Used for tape recording and

playback functions. See the VCR operating guide for details.

+ 33 hidden pages