Zenec Z-E3756 operation manual

Download

Page 1

Z-E3756

INFOTAINER

USER MANUAL

Page 2

Device user manual for ZENEC media system

We are delighted that you have chosen a product from ZENEC.

Please read this operating manual before you start your new ZENEC system. In this device user manual you will find important instructions and information for the safe operation of the ZENEC system, and to help you make the most of its technical advantages.

All the information in this manual corresponds to the state at the time of going to press, and applies only to ZENEC systems in original condition. On account of possible updates to device software, the illustrations and features shown in this operating manual may be different from your ZENEC system. Differences in the information, illustrations or features cannot form a basis for any claims.

If you sell your vehicle with the ZENEC system still fitted, please ensure that this operating manual stays with the vehicle, and that any personal data like a phonebook stored in the device is deleted.

CONTENTS

SAFETY INSTRUCTIONS ..................................................................................................................04

TURN DEVICE ON AND OFF ............................................................................................................ 05

ANTI-THEFT PROTECTION ...............................................................................................................05

MULTIFUNCTION STEERING WHEEL CONTROLS ........................................................................06

Z-E3756 (FRONT PANEL) ..................................................................................................................07

REMOTE CONTROL ...........................................................................................................................08

MAIN MENU STRUCTURE ................................................................................................................... . 09

MAIN MENU ICONS..................................................................................................................... ........... 10

MEDIA AUDIO SOURCES ................................................................................................................. 11

INPUT SOURCES ................................................................................................................................ 12

STATUS BAR.......................................................................................................................................13

SEARCH AND INPUT FUNCTION ..................................................................................................... 14

FM RADIO ........................................................................................................................................... 15

FM BAR GRAPH MODE ..................................................................................................................... 16

MANUAL FM STATION SEARCH ...................................................................................................... 17

FM SETUP ........................................................................................................................................... 18

FM STATIONS-PRESETS ................................................................................................................... 19

DAB+ RADIO SETUP .........................................................................................................................20

DAB+ ENSEMBLE AND STATION LIST ............................................................................................ 21

DAB+ SETUP ...................................................................................................................................... 22

DAB+ STATIONS-PRESETS ..............................................................................................................23

USB / BT A2DP / IPOD / DVD (AUDIO) MEDIA ................................................................................ 24

USB / BT A2DP / IPOD / DVD (AUDIO) MEDIA CONTROL AND OPERATION BAR ..................... 25

BT-MUSIC (A 2DP) ............................................................................................................................. 26

iPOD (AUDIO) .....................................................................................................................................27

PLAYLIST (AUDIO) ............................................................................................................................ 28

SMART PLAYLIST (AUDIO) ............................................................................................................... 29

FAV PLAYLIST (AUDIO) ..................................................................................................................... 30

VIDEO MEDIA: HARDDISK / DVD ..................................................................................................... 31

PLAYLIST (VIDEO) ............................................................................................................................. 32

HDMI / AV/IN........................................................................................................................................ 33

CAMER A .............................................................................................................................................34

CAMERA GRID-LINES ....................................................................................................................... 35

USING ANDROID AUTO ..................................................................................................................... 36

ANDROID AUTO OPERATION ..........................................................................................................37

BLUETOOTH (HANDS- FREE SYSTEM) ...........................................................................................38

CONTROL AND OPERATION BAR (RIGHT) .................................................................................... 39

DEVICE MANAGER ............................................................................................................................40

PAIRING .............................................................................................................................................. 41

BLUETOOTH SETUP .......................................................................................................................... 42

BLUETOOTH STATUS BAR ............................................................................................................... 42

ACCEPTING/ENDING INCOMING CALLS (VIA DEVICE) ...............................................................43

OUTGOING CALL VIA NUMERIC PAD .............................................................................................43

OUTGOING CALL VIA PHONEBOOK ...............................................................................................43

BLUETOOTH MENU ...........................................................................................................................44

PHONEBOOK......................................................................................................................................45

CALL LISTS ........................................................................................................................................46

REMOTE CONTROL APP FOR SMARTPHONES ............................................................................ 47

FAVORI TE S ......................................................................................................................................... 48

MULTIZONE (REAR SEAT ENTERTAINMENT) ................................................................................49

NAVIGATION. ......................................................................................................................................50

NAVI G ATION UPDATE ....................................................................................................................... 50

MAPS (EXAMPLES) ........................................................................................................................... 51

NAVIGATION START UP INSTRUCTIONS ..................................................................................52-53

NAVIGATION SPLIT SCREEN ........................................................................................................... 54

SETUP OPERATIONS ........................................................................................................................55

DISPLAY ICON (BRIGHTNESS) ........................................................................................................ 56

SETUP OF SOURCES ........................................................................................................................ 57

MISC SETUP ....................................................................................................................................... 58

BT / NETWORK SETUP .....................................................................................................................59

AUDIO SETUP .....................................................................................................................................60

VOLUME SETUP ................................................................................................................................. 61

QUICK AUDIO SETUP (BAL/FAD_SUBWOOFER_LOUDNESS_BASS BOOST) .........................62

AUDIO SETUP: EXPERT MODE ........................................................................................................ 63

AUDIO VOLUME – BASE LEVEL SETUP ......................................................................................... 64

BALANCE / FADER ............................................................................................................................ 65

EQUALIZER ........................................................................................................................................66

X-OVER SETUP ..................................................................................................................................67

SUBWOOFER SETUP ........................................................................................................................ 68

TIME ALIGNMENT ..............................................................................................................................69

NAVI-MIXER SETUP ..........................................................................................................................70

TFT DISPLAY CONFIGURATIONS .................................................................................................... 71

CAR (VEHICLE) SETUP ..................................................................................................................... 72

INPUT SETUP .....................................................................................................................................73

SYSTEM SETUP ................................................................................................................................. 74

CLOCK & DATE SETUP .................................................................................................................... 75

SOFTWARE VERSION ...................................................................................................................... 76

PASSWORD ........................................................................................................................................77

INSTALLATION NOTES .....................................................................................................................78

REMOVAL WORK AND PREPARATION ..........................................................................................78

OVERVIEW INCLUDED ACCESSORIES .......................................................................................... 79

COMMISSIONING ................................................................................................................................79

CONNECTION DIAGRAM Z-E3756 ............................................................................................. 80 - 81

ABBREVIATIONS ...............................................................................................................................82

STATUTORY RIGHTS AND WARRANTY .........................................................................................83

2 Rev.C 3 Rev.C

Page 3

GERÄTEBEDIENUNG – Z-E3726



Help  Passwort

SAFETY INSTRUCTIONS

CAUTION

If the driver of the vehicle is distracted, this may lead to an accident or injur y. Operating the ZENEC system can distract attention from the general traffic situation! Equally, connecting, changing or inserting data media can distract the driver from the general traffic situation.

CAUTION

Always choose loudspeaker settings such that acoustic signals coming from outside can always be heard in the vehicle (e.g. signal horns or sirens).

CAUTION

Incorrect installation or commissioning of the ZENEC system may cause damage to the ZENEC system or to the vehicle electronics. Only let qualified specialists authorized by ZENEC install the device.

CAUTION

This ZENEC system is intended solely for operation at an on-board voltage of 12 V DC. Operating the ZENEC system at any other voltage can cause damage to the ZENEC system or to the vehicles electrical system.

TURN ON / OFF

See page 7 and item  for the location and manual operation of the left rotary encoder with Power ON / OFF function.

Auto ON / OFF

Z-E3756 devices mounted in vehicles without factory installed SWC: Device will switch on with ignition (ACC) position of key*.

Z-E3756 devices mounted in vehicles with OE SWC and additional Stalk interface: Device will switch on with ignition (ACC) position of key*.

NOTE

For vehicles equipped with OE steering wheel controls, a separate Stalk interface is required (not part of this kit).

*The ACC ignition key may not auto start the device, depending on the presence of a second 12V battery in the vehicle and the brand specific electrical power cable routing and system connection of auxiliary components.

Further info may be obtained by the vehicle maker or an authorized ZENEC dealer.

CAUTION

Taking apart or modifying the ZENEC system can result in damage to the device or the vehicle. Opening the device or modification by a person not authorized by ZENEC will render warranty claims null and void.

In the event of a malfunction or defect please contact an authorized ZENEC dealer. Unauthorized repairs will void any warranty claim.

CAUTION

The connection and charging leads of external mobile devices can get in the way of the driver. Please run these so that the driver's freedom of movement is not hindered.

CAUTION

Route recommendations and displayed traffic signs on the ZENEC system may differ from the real situation. Real traffic signs and traffic regulations have precedence over route recommendations and indications of the ZENEC system.

Speed data displayed in the navigation system corresponds to the permitted speed limit. Please adjust your speed and driving behavior to the prevailing visibility, weather, road, and traffic conditions.

ANTI-THEFT PROTECTION

The ZENEC system is equipped with an anti-theft protection function. If this is active, on restarting the ZENEC system after interruption of the power supply you will be asked to enter your password.

To change the password:

DeviceUserManual→Setup→Password

NOTE

Keep your password safe. If the password is lost the ZENEC system must be uninstalled, and sent back in to ZENEC Service to unblock the anti-theft protection. The unblocking service is not free of charge!

See detailed information at page 77

4 Rev.C 5 Rev.C

Page 4

MULTIFUNCTION STEERING WHEEL

Z-E3756 (FRONT PANEL)

7 br

Until model year 2015

As of model year 2015 >

SRC



Device Front Panel Control Options

Item Icon Function

       

Item Function

Reduce volume



Increase volume



Mute



Change playback source



Radio source Press to choose the next radio station.



Media source

Radio source Press to choose the previous radio station.



Media source

Accept call



Reject/End call



NOTE

These functions can only be used when a multifunction steering wheel is present in the vehicle, and the ZENEC system is connected via a car specific CAN/Stalk interface.

6 Rev.C 7 Rev.C

Press to choose the next track/title. Press and hold to fast for ward.

Press to choose the previous next track/title. Press and hold to fast rewind.



14 15 16 17

HOME

TUNER

MEDIA

NAV

CAM

VOICE

ALT

Turn to increase or decrease playback volume Press and hold to turn device ON or OFF Press to mute/- unmute device Press to jump back to main menu Press and hold jump to audio settings

Press to open radio source

Press to open media source Press to jump to navigation

Inside navigation source: Short press open Quick-Media-Control-Bar

Press, to eject the CD/DVD

CD/DVD slot

microSD card slot for GPS navigation software behind „MAP“ cover

Turn for list scrolling Press to confirm a selection Turn for navigation MAP Zoom IN/-OUT

Hole in the panel for the reset pin Press to enter camera source

Press again to switch the CAMERA input channel (CAM1 -> CAM2 ->CAM3) Press to start the Android voice control. Tap once more to cancel the voice

control. Press and hold to restart the voice input.

Press to select preferred content or execute a function Press and hold to jump to audio settings

Press to open the Bluetooth suite

IR receiver for remote control

Touchscreen display

Internal microphone

Page 5

REMOTE CONTROL



MAIN MENU STRUCTURE

















Item Function

Change playback source



Play/Pause



LED



Turn on/off device



Radio source Press to choose the next radio station



Media source

Increase volume



Mute / unmute



Reduce volume



Radio source Press to choose the previous radio station



Media source

Turn on/off remote control



Press to choose the next track/title Press and hold to fast for ward

Press to choose the previous next track/title Press and hold to fast rewind

ON OFF



Main menu with 3 Icons

Main menu with 6 Icons

The icon amount show per main menu page can be adjusted in the setup (see page 59 „Main Menu Style“).

Display – touch sensitive operation Bedienung

Function Icon Operation

Slide

Move

Swipe to navigate in the main menu by sliding page to the lef t or right

Press and hold to move an icon into the desired position

8 Rev.C 9 Rev.C

Page 6

MAIN MENU ICONS

MEDIA AUDIO SOURCES

You can navigate through main menu pages by swiping or tapping on the orange page markers in the bottom area of each page.

Function Icon Operation

Navi

Bluetooth

Tun e r (FM )

USB

iPod

BT- Music

Tap to open navigation App

Tap to open the Bluetooth suite

Tap to open FM radio source

Tap to enter USB source

Tap to open audio playback source (Apple)

Tap to open BT-Music source

You can access / enter connected internal or external sources by tapping on the main icon according to the following list.

Function Icon Operation

USB

iPod

BT- Music

Android Auto

Tun e r FM

DAB+

Tap to enter USB source

Tap to open audio playback source (Apple)

Tap to open BT-Music source

Tap to start Android Auto

Tap to open FM radio source

Tap to open DAB+ radio source

HDMI

DAB+

Tap to open DAB+ radio source

DVD

10 Rev.C 11 Rev.C

Tap to open HDMI source

Tap to enter DVD source

Page 7

INPUT SOURCES

STATUS BAR (”INFO BAR”)

To select and open external sources like HDMI, Camera, AV/IN or Android Auto, they need to be paired or physically connected to the device.

Input Sources

Function Icon Operation

HDMI

Camera

Android Auto

AV/I N

NOTE

Tap to open HDMI source

Tap to enter camera source

Tap to start Android Auto

Tap to open AV/IN source

Icons in the main menu remain greyed out for sources not connected to device.

The „info bar" in the upper hand screen area shows TA, volume and time but also contains two important controls for device operation: BACK (left side) and ALT (right side).

Function Icon Operation

Back

Clock Time

Tra f fic Announcement

Volu me

ALT

No DAB Signal

Tap to jump one level up or back

Display of time (no interaction possible)

Traffic announcement of FM radio (if function is set to active)

Shows the current playback volume

Tap to select / start a previously assigned function

Settings→Misc→ALTSoftkeybutton

This icon indicates that no DAB signal, or no DAB antenna is connected to device.

12 Rev.C 13 Rev.C

Page 8

SEARCH AND INPUT FUNCTION

FM RADIO

The keyboard for search and input is based on the Android OS system layout. The system language selection will automatically assign QUERTY or QWERTZ layout.

Function Icon Operation

Cursor and text input field

Tap to delete a number, letter or sign

Delete

Press and hold to delete the full string

Back

Tap to end the search or the input

Tap to select small / capital letters for entries

Large / Small

Tap twice to write all letters or numbers in capital style

List view

Open keyboard

Tap to show all search results/- full list

Tap to open the keyboard

The FM RDS source menu of fers a control-/operating section on the right hand side, for fast and convenient adjustments during the FM radio playback.

Center Section of Display

Function Icon Operation

Station freq search up

Station

Station freq search down

Cover

Info display area

Tap to start the auto FM station search, running up in the frequency band

Station Name / Station Frequency

Tap to start auto FM station search, running down in the frequency band

Shows radio station graphics or cover picture of artist

Finger swiping left and right to access stored FM stations previous / next

Control- and Operating Section

Function Icon Operation

Info

Frequency Scale

Preset

Tap to show station information

Tap to open FM station frequency bar

Tap to show the stored FM station list

Tuner Setup

FM / DAB Switch

14 Rev.C 15 Rev.C

Tuner settings

Tap to activate or de-activate the auto switching of RDS traffic announcements

Tap to switch to DAB

Page 9

FM BAR GRAPH MODE

MANUAL FM STATION SEARCH

The FM setup mode (press gear icon) allows to assign two different operation modes to both station frequency arrows: manual steps in 100kHz, or auto scan (stopping at next station). See page 18.

Function Icon Operation

Station Frequency UP

Station Frequency Input

Station Frequency DOWN

Tap to start manual 100kHz jump, or FM station auto search up

Tap to open the frequency direct input mode keyboard

Tap to start manual 100kHz jump, or FM station auto search down

Press and hold to slide the frequency pointer of the bar graph

Bar Graph Scale

into any position. Tap to set a desired frequency value on the scale

When you tap to the frequency display area, the numeric input keyboard opens for a direct station frequency input.

Function Icon Operation

Station Frequency UP

Station Frequency

Station Frequency DOWN

Scale

Delete

Keypad

Tap to auto seek / manual seek up, depending on setting

Tap to open and close station direct frequency input via keypad

Tap to auto seek / manual seek down, depending on setting

Radio frequency scale display

Tap to delete a number Press and hold to delete the full text string

Direct frequency input option

Touch to confirm frequency

16 Rev.C 17 Rev.C

Page 10

FM SETUP

FM STATIONS-PRESETS

Here you can set important FM RDS based settings such are AF and REG.

Function Icon Operation

REG

SCAN

Alternative Frequency ON / OFF

Setting to keep AF in the regional (local) station tuning mode.

Setting to choose the automatic or manual station frequency search.

Tap to activate or de-activate the auto switching of RDS traffic announcements

Select a previously stored FM radio station by tapping on the station preset button.

Function Icon Operation

Select station / Store a station

Tap to switch to previous preset page

Tap to switch to next preset page

Tap to select a previously stored radio station. Press and hold the station to save an actual radio station on any of the station preset buttons

18 Rev.C 19 Rev.C

Page 11

DAB+ RADIO

DAB+ ENSEMBLE AND STATION LIST

The DAB+ source menu offers a control- + operating section on the right side of the display, allowing for simple and convenient direct adjustments of DAB+ functions in the playback menu.

Function Icon Operation

Station up

Station info

Station down

Slideshow

Info Display Area

Tap to jump to next station Press and hold to jump to next Ensemble

Station Name / Ensemble name

Tap to jump to previous station Press and hold to jump to previous Ensemble

Radio station artwork / artist display (”MOT Slideshow”)

Finger swiping left and right to switch between Preset stations

Control- and Operating Section

Function Icon Operation

FM / DAB+ Switch

Info

List

Tap to switch to FM tuner source

Tap to show station information - main display

Tap to open the station list (showing all currently receivable radio stations in the area)

Once the first DAB+ band scan has completed, device will show all DAB+ Ensembles and radio stations of sufficient signal strength. The Ensemble list and its content is auto updated periodically.

Function Icon Operation

Ensemble list selection

List scrolling

Back

Tap to open an Ensemble, showing the assigned DAB+ radio station list

Press and hold to move the slider of the Ensemble list up and down

Tap to jump one level back or up

A tap on each Ensemble opens the related DAB+ station list of the respective Ensemble. The station list content follows exactly the original Ensemble display format and list sequence.

Preset

Setup

20 Rev.C 21 Rev.C

Tap to show the stored DAB station list

Tap to change settings for DAB+ functions

Function Icon Operation

Radio station selection

List scrolling

Tap to select one particular radio station out of the list

Press and hold to move the slider of the station list up and down

Page 12

DAB+ SETUP

DAB+ STATION-PRESETS

The setup page for the DAB+ tuner allows to define important functions such as DAB<>DAB and FM<>DAB station following. And also to activate the phantom power supply voltage of the DAB antenna socket.

Function Icon Operation

DAB-DAB Following

FM-DAB Following

DAB antenna socket phantom power

DAB Firmware

NOTE

Tap to turn DAB-DAB station following ON or OFF

Tap to turn FM-DAB station following ON or OFF

Tap to turn the 12V phantom power supply of the DAB antenna socket on the device backside ON or OFF

Displays the current DAB+ Firmware version

The FM- DAB Following function works with a static function algorithm. This may or may not deliver good switching results, depending on the broadcast region.

Select a previously stored DAB+ radio station by tapping on the station preset button.

Function Icon Operation

Select station / Store a station

Tap to switch to previous preset page

Tap to switch to next preset page

Tap to select a stored DAB+ station. Press and hold the station to save the actual radio station on any of the station preset buttons

22 Rev.C 23 Rev.C

Page 13

USB / BT A2DP / iPOD / DVD (AUDIO) MEDIA

USB / BT A2DP / iPOD / DVD (AUDIO) MEDIA CONTROL AND OPERATION BAR

Various types of information shown in the source menu of the audio playback by (USB, BT A2DP, iPOD, etc.).

Function Icon Operation

Album Ar t / Cover

Artist

Tra c k

Album

Genre

If a cover is stored on the music media, it will be displayed. This function is not supported for BT Audio playback.

Information about the artist

Information about the track

Information about the album

Information about the genre or any other special infos

Tap to skip to the previous track Press and hold to start fast reverse

Back

Swipe to the left to skip to the previous track

Play

Pause

Tap to play a track

Tap to pause at a track

Tap to skip to the next track Press and hold to start fast for ward

Forward

Swipe to the right to skip to the next track

The control and operation bar on the right side of the audio playback media menu continues to play lists, favorites, and external USB memory.

Function Icon Operation

Playlist

Smart Playlist

Favorites

Video <-> Audio Source

Shuffle

Repeat

Source

Tap to display the folder and track list This function is not supported for BT Audio playback.

Tap to add a track to own playlist This function is not supported for BT Audio and iPod

Tap to add a track to FAV playlist This function is not supported for BT Audio and iPod

Tap to switch between audio or video playback. This function is not suppor ted for BT Audio and iPod

Tap to turn on the random play feature within the folder that is playing

Tap to automatically repeat a track or a complete music collection

Touch to jump to next available source (Available sources USB, iPod, DVD and BT-Music)

Playback Time Line

24 Rev.C 25 Rev.C

Tap or slide to skip within a track

Page 14

BT MUSIC (A 2DP)

iPOD (AUDIO)

The A2DP RVC interface offers Play, Pause and Skip control of previously paired smartphones in audio playback mode. The iD3-Tag meta data display is possible only when tag data is contained in the streamed music track.

NOTE

The listed functions depend on the paired mobile phone, installed software versions and the degree of compatibility.

The order of the Artist display is given by the sor ting sequence on the mobile Apple device and can not be changed or adapted in any way.

26 Rev.C 27 Rev.C

Page 15

PLAYLIST (AUDIO) SMART PLAYLIST (AUDIO)

There are different playlists. We generally differentiate between the standard and special playlists (Smart Playlist and Favorites Playlist).

Function Icon Operation

Folder (uppermost)

Folder

Song

Artist

Album

Smart Playlist

FAV List

Tap to go to the next higher level

Touch to go to the highest folder level Hold to go to the hard disk over view (root)

Listing by song

Listing by artist

Listing by album

Tap to access the Smart Playlist (Shows created Playlists)

Tap to access the FAV playlist

Tap to open search keypad

Scroll in the list:

Scroll

Touch and hold to move the slider up or down Tap and hold your finger on the list to move the list up or down

This function allows you to manage the playlists which created by the Smar t Playlist function. The playlists can be renamed.

Function Icon Operation

Playlist name field

Tap to go to the next higher level

Tap to edit a playlist (editing mode)

Playlist editing mode

Tap to delete a playlist

Tap to rename a playlist

Tap to cancel playlist edit mode

Tap to edit a song within a playlist (editing mode)

Song editing mode

Tap to delete a playlist song

Tap to move a song of the playlist (Add a song to another playlist)

Tap to cancel edit mode

Scroll in the list:

Scroll

Touch and hold to move the slider up or down Tap and hold your finger on the list to move the list up or down.

28 Rev.C 29 Rev.C

Page 16

FAV PLAYLIST (AUDIO)

VIDEO MEDIA: HARDDISK / DVD

This playlist feature allows you to add a song easily and quickly to a fixed favorite playlist.

Function Icon Operation

Playlist name field

Delete

No function, text field only. Note: The name of the FAV playlist can not be changed.

Tap to delete a FAV playlist song

Scroll in the list:

Scroll

Touch and hold to move the slider up or down Tap and hold your finger on the list to move the list up or down.

For video playback via USB or DVD parking cable must be connected during the device installation. Without this connection, the screen remains black.

Function Icon Operation

Jump inside Title

Video<->Audio Source

Back

Play

Pause

Forward

Playlist

Shuffle

Repeat

Tap to skip directly to the desired position Slide to reach the desired position

Tap to switch between audio or video playback. This function is not suppor ted for BT Audio and iPod

Tap to skip back to the previous section

Tap to play a film

Tap to pause a film

Tap to skip forward to the next section

Tap to display the folder and track list This function is not supported for BT Audio

Tap to turn on the random play feature within the folder that is playing

Tap to automatically repeat a film or complete video collection

30 Rev.C 31 Rev.C

Page 17

PLAYLIST (VIDEO)

HDMI / AV/IN

Playlist (Video) displays the video files on the USB data carrier with their file name. In this list sliding up or down is easily possible.

Function Icon Operation

Folder

Back

Play / Pause

Forward

Shuffle

Repeat

Video <-> Audio Source

Touch to go to the highest folder level Hold to go to the hard disk over view (root)

Tap to skip back to the previous section

Tap to play a film or a video Tap to pause a film or a video

Tap to skip forward to the next section

Tap to turn on the random play feature within the folder that is playing

Tap to automatically repeat a film or complete video collection

Tap to switch between audio or video playback. This function is not suppor ted for BT Audio and iPod

Scroll in the list:

Scroll

Touch and hold to move the slider up or down Tap and hold your finger on the list to move the list up or down

Tap on the HDMI icon to open the HDMI source, if a compatible HDMI source is connected, for example a videogame, smartphone, tablet, notebook.

Function Icon Operation

HDMI

Tap to open HDMI source mode

Tap to the AV/IN icon to open the AV/IN source, if a compatible AV/IN source is connected, for example a videogame, smartphone, tablet, notebook.

Function Icon Operation

AV/I N

Tap to open AV/IN source mode

CAUTION

Playing video files while driving is not permitted by the law. For this reason the screen will switched off when the vehicle is in motion, with the playback of sound only.

32 Rev.C 33 Rev.C

Page 18

CAMER A

CAMERA GRID-LINES

Tapping the camera icon starts the manual camera mode, when a CVBS type camera is connected to the camera input of the unit.

Function Icon Operation

Camera

Camera switching

Tap to open camera source

Tap to switch sequentially through all three cameras (CAM-1 > CAM-2 > CAM-3) Same control operation also possible by SmartDial short press

Comfortable parking assist with three adjustable camera grid lines for their own individual attitude.

Function Icon Operation

Settings

Presentation

Line fields

Back

Toge t h er

Apart

Down

Basic setting

►◄

◄►

▼

▲

Touch to adjust the lines

Touch to show or hide the lines

Display the line fields (1 – 3) with the arrows to change levels.

Touch to exit the settings menu

Touch to narrow the current field

Touch to widen the current field

Touch to bring the current field nearer

Touch to push the current field away

Touch to set the lines to the basic setting

NOTE

To carry out calibration of the assist lines, reverse parallel to the parking space stripes and centrally to the star t of the parking space.

34 Rev.C 35 Rev.C

Page 19

With Google Android Auto, you are be able to access compatible apps and online services of your Android smartphone in your motor home and operate them intuitively with the display of your ZENEC device or the voice assistant from Google.

ANDROID AUTO OPERATIONUSING ANDROID AUTO







    

USING ANDROID AUTO

PR EPAR ATION :

• Download the Android Auto app from the Google Play Store.

• Connect the Android smartphone with the USB connector of the ZENEC device.

• To use the hands-free function of Android Auto, connect the Android smartphone with the ZENEC

 deviceviaBluetooth.Pleasepayattentiontochapter„Bluetooth(Hands-freeSystem)→Pairing“.

INITIAL OPERATION:

1. For the initial operation, the vehicle must not be in motion and the hand brake must be put on.

2. Tap to the Android Auto icon in the main menu of the ZENEC device to choose the Android Auto source.

3. Follow the dialogue on the display of the ZENEC device to install Android Auto and to configure the start behaviour. It is possible to change the selected start behaviour in the setup operations anytime

 later.Pleasepayattentiontochapter„SetupOperation→Misc→LaunchAndroidAuto“.

4. After the initial operation has been completed successfully, the Android Auto user interface appears on the screen of the ZENEC device.

Item Icon Operation

NOTE

● AndroidAutomaynotbeavailableonalldevicesandisnotavailableinallcountriesand

regions.

● TouseAndroidAutowithyourAndroidSmartphone,atleastAndroid5.0(Lollipop)orahigher

version of the Android operation system must be installed on your smartphone.

● TouseAndroidAutoonyourZENECdevice,youhavetoadjusttimeanddateonyourZENEC  devicecorrectly.Pleasepayattentiontochapter„SetupOperations→System→

Clock & Date Setup“.

● FormoredetailedinformationaboutAndroidAuto,pleasevisit

https://www.android.com/auto/ and https://support.google.com/androidauto#topic=6348027

Android Auto user interface

Navigation

Telephony

Open Android Auto user interface

Media playback

Open ZENEC main menu

Activate Android Auto voice control

Smartphone status information (can vary depending on the model)

36 Rev.C 37 Rev.C

Page 20

BLUETOOTH (HANDS-FREE SYSTEM)

ABOUT THIS CHAPTER

This chapter describes how to operate and use the hands-free system. In addition, the BT setup and functions of the ZENEC BT system are described.

SAFETY INSTRUCTIONS

CAUTION

Operating the mobile phone with the hand while driving is not permitted. Only enter data or make changes via the ZENEC system when vehicle is parked, or traffic situation allows such actions.

CAUTION

Network coverage depends on a number of factors – such as the network provider, or the geographical position of the vehicle. Tunnels, underpasses, parking garages, or street canyons in cities may lead to interruption of the connection. Thermal glazing or metallic stickers on the windows of the vehicle may also disrupt the connection of the smartphone to the GSM network.

CONTROL AND OPERATION BAR (RIGHT)

The vertical control and operation bar on the right area of the Bluetooth page serves to invoke device manager, or access phone book, favorites, call logs, numeric keypad, Bluetooth settings and Scan (BT device search).

Function Icon Operation

Device manager

Phonebook

Favorites

Call logs

Numeric pad

Bluetooth setup

Scan (Search)

Tap to access the device manager page

Tap to access the phonebook of the currently paired mobile phone

Tap to access the stored favorites

Tap to access the call logs

Tap to open the numeric keypad

Tap to change the most important settings for BT operation

Tap to search for a new Bluetooth device

38 Rev.C 39 Rev.C

Page 21

DEVICE MANAGER

PAIRING

The BT function on the device must be activated to invoke connection process. Please pay attention to the smartphone manufacturer's instructions regarding device pairing.

Function Icon Operation

Device manager

Tap to pair, disconnect, or manage mobile devices

Function Icon Operation

Pair Tap to reconnect a paired Bluetooth device

Disconnect

Delete

Tap to disconnect a paired Bluetooth device

Tap to delete a Bluetooth device from the list (requires the device to be disconnected)

Icon Meaning

This icon indicates that the paired Bluetooth device supports HSP/HFP, and can be used via the hands-free system.

This icon indicates that the paired external Bluetooth Speaker supports SBC/ A2DP, and can be used via the hands-free system for Audio Streaming.

To connect a smartphone to the Zenec device via Bluetooth, first step is to successfully complete the pairing process.

Via ZENEC system

Function Icon Operation

Tap to the SCAN icon to initiate a search for BT devices. Scan (Se arc h)

From the list select the desired mobile device that you want to

synchronize with the ZENEC system. Once device is selected,

follow the instructions.

Via the mobile device

Function Icon Operation

Make sure that the ZENEC system is in Device Manager view Search

otherwise the ZENEC system will not be visible to other devices.

Follow the instructions of the device manufacturer on pairing.

Auto Connect

Once a mobile device has been connected with the ZENEC system, it will be automatically paired when the ZENEC system is started. On being briefly disconnected the ZENEC system will attempt to establish a new connection.

NOTE

On pairing for the first time, be sure to permanently enable the connection confirmation on your mobile device, other wise malfunctions may occur during the Auto Connect process.

40 Rev.C 41 Rev.C

Page 22

BLUETOOTH SETUP

On the Bluetooth setup page you can adjust settings for Bluetooth operation. Press the appropriate button / field to change any of the listed settings.

ACCEPTING/ENDING INCOMING CALLS (VIA DEVICE)

Function Icon Operation

Bluetooth Settings

Auto Connection

Contacts Order

Microphone

Microphone Gain

Bluetooth Adress

Tap to change settings for BT operation

ON / OFF

1. by first name of contact

2. by surname of contact

Internal = inside device External = only if installed

Touch to set the Mic. gain from 1 to 3

Unique ZENEC BT device address.

BLUETOOTH STATUS BAR

Icon Function

Mobile phone currently connected

Battery capacity of the mobile phone currently connected

Signal strength of the current mobile network

BT A2DP Source Mode Indicator, if A2DP (SRC) mode is active (Audio signal transmission to external Bluetooth speakers or head phones)

Function Icon Operation

Reject

End

Tap the green handset to accept the call

Tap the red handset to reject the incoming call

Tap the red handset to end the call

DIAL A CALL USING NUMERIC PAD

In the control-/operation panel touch the to open the numeric pad.

Key in the desired phone number in full using the numeric pad. To establish the connection, touch The display now changes to the call connection view.

DIAL A CALL USING PHONEBOOK

In the control-/operation panel touch the

From the phonebook list select a call partner and set up a connection by touching

to open the phonebook.

After touching a contact you will be directed to the contact details view.

NOTE

Depending on the existing numbers of mobile phone and phonebook entries, the first synchronization can take several minutes.

42 Rev.C 43 Rev.C

Page 23

BLUETOOTH MENU

PHONEBOOK

Function Icon Operation

Discrete

Mute conversation

Numeric key pad

Back

NOTE

Touch to pass the call from the hands-free system to the mobile phone or vice versa

Mute / un-mute the microphone input

Tap to show the numeric key pad Necessary in case asked to enter a further number during the call (telephone call center etc.)

Tap to jump back to the previous level

To be able to use the phonebook or call lists without any problems, make sure that during the pairing process you confirm data access enable on the smartphone.

Contacts

After successful pairing of the smar tphone with subsequent phone book synchronization, the device will show you the full contact list. You can directly add contact Favorites.

Function Icon Operation

Tap to open the contact search keypad

Scroll in the list:

Scroll

Touch and hold to move the slider up or down, showing letters by the alphabet.

Phonebook Contacts

Up to 1000 contacts per paired mobile phone can be synchronized; it makes no difference whether the contacts are stored in the phonebook or on the SIM card.

Tap to jump to the contact list.

Conctact List

Call / Accept

Add Favorite

44 Rev.C 45 Rev.C

Tap to to show phone numbers of the respective contact entry

Tap the green handset to set up/- start the call

Tap to add a new Favorite Tap once more to remove a Favorite

Page 24

CALL LISTS

REMOTE CONTROL APP FOR SMARTPHONES

If a compatible mobile phone is connected, call lists from the mobile phone will be synchronized with the BT hands-free system (process can take some minutes, depending on the number of contacts). Once sync process has completed you will be able to access the following logs:

Function Icon Operation

Call logs

Missed Calls

Received Calls

Dialled Calls

Tap to see all call logs

Tap to see the missed calls only

Tap to see the received calls only

Tap to see the dialled (outgoing) calls only

Function Icon Operation

Missed

Incoming

Entries with this icon refer to calls that you missed

Entries with this icon refer to accepted incoming calls

With the ZENEC SP-REM app for iOS and Android smartphones, audio functions (Volume, Play, Pause, Stop) and audio source switching of the Z-E3756 can be controlled quite conveniently.

Android Version:

To be able to update your Smar tphone with ZENEC SP-REM app, proceed as follows:

1. Go to your official Android Google Play Store and search for the “ZENEC SP-REM app“

2. Install the ZENEC Remote Control App for Smar tphones

Apple iOS Version:

To be able to update your iPhone/- iPad with ZENEC SP-REM app, proceed as follows:

1. Go to your official Apple App Store and search for the “ZENEC SP-REM app“

2. Install the ZENEC Remote Control App for Apple iPhone/- iPad

NOTE

While using the Remote Control App, be sure that your smartphone is successfully connected to the ZENEC device via Bluetooth, otherwise operating audio remote control functions is not possible.

Contacted

46 Rev.C 47 Rev.C

Entries with this icon refer to outgoing calls

Page 25

FAVORI TE S

On this page you can link eight or more phone numbers to become favorites. You can select any of the phone numbers in the phonebook and save them as Favorites; the only exceptions are e-mails and addresses.

NOTE

All Favorites are visible to every user of the device as they are saved in the device memory.

MULTIZONE (REAR SEAT ENTERTAINMENT)

Function Icon Operation

Stored Favorite

Tap to set up/- start a connection with a stored Favorite

 Tap to add a new favorite contact

Assign New Favorite

 Select desired number from phonebook and confirm with this

Delete

Tap to remove a stored Favorite

icon

Function Icon Operation

BT-SRC (EXT BT A2DP Source Mo de)

CD/DVD

A/ V-IN

M-Zone OFF

Tap to close the M-Zone source selection

Tap to activate or deactivate Ext. BT Source mode (AudioStreaming to external Bluetooth speaker or headphone)

Tap to access the DVD playback

Tap to access the external audio/video

Tap to switch off the M -Zone

DVD

If additional monitors are connected to the ZENEC system, DVD playback independent of the actual playback on the rear monitors is possible using this function.

A/ V- IN

NOTE

A change of data on the mobile phone will not sync automatically with the stored Favorites. Should you want to change phone numbers this change must be manually transferred to Favorites by deleting the exisiting Favorite and re-assigning the new number.

If additional monitors are connected to the ZENEC system, this combined audio/video input can be used to connect a wide range of external devices, and played independently of the actual playback at the additional monitors.

BT A2DP SRC Mode for BT Speaker

With this function the actual audio playback can be played /- streamed to external BT Speakers.

NOTE

When using an external BT speaker, make sure that it is connected to your device via Bluetooth. Please see also the chapter Bluetooth for a successful pairing process.

48 Rev.C 49 Rev.C

Page 26

NAVIGATION

MAPS

For the ZENEC devices Z-E3756 a navigation package is available separately. This bundle comes with multilanguage Quickstart manual and navigation software on microSDHC card. The images shown on this and the following page, as well as instructions, are taken from this solution.

Function Icon Operation

Tap to start navigation and show map view

Navigation

(only if navi microSD card of the Z-E3756 set is insert in the device)

NAVI G ATION UPDATE

Activation of the free 36-month map software update period begins once the ZENEC system has been switched on and vehicle was driving over a distance of >10 km.

Requirements

1. PC or notebook with a Windows 7 operating system or higher, an SD card reader, together with broadband Internet access. Apple OS not supported.

2. An activated navigation map microSD card (set content)

3. Latest Naviextras Toolbox software, installed on your computer.

Download-Link: https://zenec.naviextras.com/shop/portal/downloads

To update your ZENEC device with new maps, proceed as follows:

1. Go to https://zenec.naviextras.com/shop/portal and set up a user account with a password and the personal data for your navigation device.

2. Download the Toolbox Software: Naviextras Toolbox Download. Read through the application instructions before taking any further steps. The Toolbox is periodically updated. Therefore, should you want to make a map update at a later time, always download the latest Toolbox version. This will guarantee optimal compatibility of all data transfer functions.

NOTE

Map updates can be carried out by visiting https://zenec.naviextras.com/shop/portal. Safety instructions: see page 4.

Fast and simple route calculation

High resolution 3D maps

Advanced route guidance

50 Rev.C 51 Rev.C

Page 27

NAVIGATION START UP INSTRUCTIONS

NAVIGATION SOFTWARE INSTALLATION

Before you can use the Z-N3756 navigation software supplied on microSD card, the Android device (Z-E3756) must be prepared by installing a software.

a. Insert the provided mircoSD card with navigation software into the respective slot of the device. Turn on the device.

b. Tap on the “navigation source icon” in the main menu to start the standard installation process (illustration 1).

Illustration 1

c. The software installation will run in a step-by-step mode. A visual animated software installation status bar allows you to track progress (illustration 2). The complete update process takes approx. 30 ~ 60 seconds.

FIRST NAVI START-UP (SAT FIX PROCESS)

› After the device install is completed make sure, the vehicle is located outdoors under free sky. There should be no objects above vehicle affecting GPS reception (trees, tall buildings etc.).

› Tap on the navigation icon in the main menu to start the navigation mode. Tap on “Show Map” to initiate the “search GPS” process.

› Allow 3 to 5 minutes of time to for the creation of the so called Sat-Fix. During this period, the vehicle must not move nor drive!

Online Updates (Map Content + Bugfixes)

Naviextras Toolbox is a Windows utility, able to establish the server access to the Naviextras portal.

■BeforeyouupdatethenavigationcontentofyourmicroSDcard,alwaysdownload,installanduse 

the latest Toolbox software.

■Beforeyoucandownloadcontentandupdatesyouareaskedforsettingupauseraccountonthe 

Naviextras portal. Once the Toolbox software has installed a login window pops open to indicate readiness for user account setup.

■WiththeuseraccountreadymakesurethefirststepisbackingupthemicroSDcardcontentpriorto

any content update. Data backup is offered automatically with Toolbox recognizing a valid nav license on the microSD card.

■Donotstartupdatebeforeyouhavenotcreatedabackup.Thebackupallowsyoutorestore 

original map data of the package, which is a welcome help to cope with update or installation problems, which would otherwise become costly software restore processes.

■Important:WhenafreeorpaytypecontentupdatewasinstalledonthemicroSDcard,thefollowing

two steps must be completed to reactivate the license:

1) Insert the microSD card into your naviceiver and start the navigation. Shut down device, remove the microSD card.

2) Start Toolbox and connect the microSD card to your PC or notebook and follow the instructions of the software (activation of license).

d. Finally, the navigation will be start automatically if the installation was successful. Device should show navigation loading mode (illustration 3). Now close the navigation software, turn off the device and read the info given under “Sat-Fix” below.

52 Rev.C 53 Rev.C

Illustration 2

Illustration 3

Page 28

NAVIGATION SPLIT SCREEN

SETUP OPERATIONS

When you tap on the Placeholder, the Album Cover Art or MOT Slideshow area will activate/ deactivate the ZENEC Navigation-Split-Screen, which shows the current active route navigation turn info`s.

Function Icon Operation

ZENEC Placeholder:

MediaPlayer Album Ar t / Cover

DAB Radio

FM Radio

Cover Ar t Exam ple:

ZENEC Placeholder:

MOT Slideshow

Example:

ZENEC Placeholder:

Tap to activate the ZENEC Navigation-Split-Screen in MediaPlayer (USB, iPod, BT-Music, DVD)

Tap to activate the ZENEC Navigation-Split-Screen in DAB Tuner source

Tap to activate the ZENEC Navigation-Split-Screen FM Tuner source

This chapter describes all the parameter and setting functions of the ZENEC system. Please note that settings or changed parameters can have a direct influence on the everyday use of the ZENEC system.

Function Icon Operation

Setup

NOTE

Tap to access the setup mode

Software updates applicable to this device, except navigation engine and map updates are free of charge. Download here: www.zenec.com/support/software-updates/

NavigationSplit-Screen (NAVI Turn In fo`s)

54 Rev.C 55 Rev.C

Show the current active route navigation turn info`s

Tap to deactivate (disable) the ZENEC Navigation-SplitScreen

Page 29

DISPLAY ICON

SETUP OF SOURCES

With the display icon, the LCD TFT screen picture brightness can be dimmed or switched off (standby) in two steps. This is done by tapping the icon.

Function Icon Operation

Disp

Tap to dim or brighten up TFT screen (100%→50%→0% “standby” )

When you tap the setup icon, you will enter this setup source page, which offers six different sources you can adjust for personal preferences.

Function Icon Operation

Misc Tap to access diverse device settings

Audio

TFT

Car

Inputs

System

Touch to access hands-free system settings

Tap to access sound settings

Tap to access display settings

Tap to access car settings (Park Assist etc.)

Tap to access Video inputs settings (camera inputs)

Tap to access system settings

56 Rev.C 57 Rev.C

Page 30

MISC SETUP

BT / NETWORK SETUP

In the Misc menu page, you can configure various settings.The display mode with 3 or 6 icons, ON/OFF of the beep sound, LED color (amber / white) of the button illumination on the device front.

Function Icon Operation

Misc

Main Menu Mode

Tap to access basic settings view

Tap to switch to 3 Icon or 6 Icon main page display layout

Touch to link source or function to the ALT button: (CAM/NAVI/

ALT But ton

ALT

Tuner/EQ/Setup/BT-Music/BT/ DISP/iPod/USB/HDMI/GAA / DVD/AV-I N)

ALT Sof tware Button

CAM-Button

Button sounds

OSD Language

Button Color

Wallpapers

Volu me Pop-Up

CAM

Touch to link source or function to ALT (HMI) button (CAM/NAVI/Tuner/EQ/Setup/BT-Music/BT/ DISP/iPod/USB/ HDMI/GAA/DVD/AV-IN)

Touch to link the Camera IN channel (CAM-1, CAM-2, CAM-3)

ON / OFF Off = acoustic acknowledgment disabled On = acoustic acknowledgment enabled

Tap to change the menu language

Tap to alter hard key illumination color to Amber or White

Tap to change the background wallpaper

ON / OFF Off = visual volume pop-up disabled On = visual volume pop-up enabled

Always / Never

Always: If the mobile device is connected during operation, Launch Android Auto

Android Auto starts automatically.

Never: If the mobile device is connected during operation,

Android Auto does NOT start automatically, but the Android

Auto icon must be tapped.

Navi MediaControlBar

ON / OFF

Off = MediaControlBar not shown inside NAVI Source

On = MediaControlBar shown inside NAVI Source

In BT / Network Setup, you can make important changes for best Bluetooth operation. Tap on the ON / OFF button of desired field to effect a change.

Function Icon Operation

Tap to access settings for BT operation

ON / OFF

Bluetooth

ON = Bluetooth module activated OFF = Bluetooth module deactivated

BT-Voice Channel

1: Driver: Sound output of call is exclusively on the driver side. 2: Front: Sound output of call is on both sides (in the entire front area).

58 Rev.C 59 Rev.C

Page 31

AUDIO SETUP

VOLUME SETUP

In the Audio menu page, you can adjust changes around the sound, e.g. Volume of the sources, loudness, bass and treble, etc.. The "Exper t Mode" view extends these setting options by additional points.

Function Icon Operation

Audio

Tap to access and configure audio settings

Tap on one of the presets to change profile (Pop / Classic /

Presets

Rock etc.) All changes made in the Expert Mode at the Equalizer will be stored under the preset “User”.

Expert Mode

Volu me

Quick Audio Control

Tap to enable or disable expert mode, accessing the advanced sound configuration options.

Tap to set initial and source volume levels

Tap to access quick audio settings (Loudness / Bass Boost etc.) This can also be accessed by long pressing of the Home button.

In the Audio menu -> Media Volume, you can customize the basic settings of each source individually.

Function Icon Operation

Media volume configuration

Media Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

TA volume configuration

TA Vol ume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

NAV volume configuration

Navi Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

BT Call volume configuration

BT Call Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

Fine adjustment of the volume of all "Gain" sources

Function Icon Operation

BT Music Gain

FM Tuner Gain

DAB Tuner Gain

USB Gain

iPod Gain

A/ V IN Gain

Fine adjustment of BT Music volume

Fine adjustment of FM tuner volume

Fine adjustment of DAB tuner volume

Fine adjustment of USB volume

Fine adjustment of iPod volume

Fine adjustment of A/V IN volume

DISC Gain

HDMI Gain

GAA Gain

Camera Gain

60 Rev.C 61 Rev.C

Fine adjustment of DISC volume

Fine adjustment of HDMI volume

Fine adjustment of GAA volume (Android Auto)

Fine adjustment of CAM audio volume

Page 32

QUICK AUDIO SETUP (BAL / FAD / SUBWOOFER / LOUDNESS / BASS BOOST)

AUDIO SETUP: EXPERT MODE

In this menu, you can adjust the Balance / Fader, Loudness, Bass Boost and Subwoofer level of the speakers in the vehicle.

Function Icon Operation

Balance Left/

7L > 0 < 7R

Right

Fader Front/ Rear

Loudness

Bass Boost

Subwoofer Gain

7F > 0 < 7R

ON / OFF

-6 < 0 > +6

In the Audio Setup menu page with the Expert Mode set to “ON”, you can change audio relevant settings. Such as Equalizer, Crossover, Navi-Mixer, etc. Please refer to the listings on the following pages.

Function Icon Operation

Expert Mode

Volu me

Balance/Fader

Equalizer

X-Over

Subwoofer

Navi-Mixer

Quick Audio Control

Tap to enable or disable expert mode

Tap to set start and source volume

Tap to set fader or balance

Tap to set the 10-Band equalizer

Tap to access crossover settings

Tap to set subwoofer settings

Tap to set navi voice output configuration

Touch to make general quick audio settings (Loudness / Bass Boost etc..) Can be accessed by long press of the Home button.

Time Alignment

Tap to adjust the time alignment

Volume Setup: see page 61

62 Rev.C 63 Rev.C

Page 33

AUDIO VOLUME – BASE LEVEL SETUP

BALANCE / FADER

In the Audio menu -> Media Volume, you can customize the basic settings of each source individually.

Function Icon Operation

Media volume configuration

Media Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

TA volume configuration

TA Vol ume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

NAV volume configuration

Navi Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

BT Call volume configuration

BT Call Volume

Set = Start with manually adjusted volume Last = Star t with last volume set before switching off

Fine adjustment of the volume of all "Gain" sources

Function Icon Operation

BT Music Gain Fine adjustment of BT Music volume

FM Tuner Gain

DAB Tuner Gain

USB Gain

iPod Gain

A/ V IN Gain

Fine adjustment of FM volume

Fine adjustment of DAB volume

Fine adjustment of USB volume

Fine adjustment of iPod volume

Fine adjustment of A/V IN volume

In this Expert Mode menu page, you can adjust the balance and fader. Press and hold the green dot of the crosshair to move sound center position into any desired position.

Function Icon Operation

Balance Left/

7L < 0 > 7R

Right

Fader Front/ Rear

Crosshair

7F < 0 > 7R

Press and hold to move green dot into desired position

DISC Gain

HDMI Gain

GAA Gain

Camera Gain

64 Rev.C 65 Rev.C

Fine adjustment of DISC volume

Fine adjustment of HDMI volume

Fine adjustment of GAA volume (Android Auto)

Fine adjustment of CAM audio volume

Page 34

EQUALIZER

X-OVER SETUP

In this Expert Mode menu page, you can set the 10-Band graphical equalizer. Press and hold the individual band level sliders to move it up or down for a level change.

Function Icon Operation

Tap to adjust the desired Band

Band

Touch and hold to change the setting of the selected band

In this Expert Mode menu, you can adjust the High-pass transition frequencies of the front and rear speakers. The factory default is OFF for front and rear speakers.

Function Icon Operation

HPF (Front)

HPF (Rear)

Tap to set the high pass filter at front channels OFF (FLAT) 50 Hz/65 Hz /80 Hz /100 Hz/125 Hz/160 Hz

Tap to set the high pass filter at rear channels OFF (FLAT) 50 Hz/65 Hz /80 Hz /100 Hz/125 Hz/160 Hz

66 Rev.C 67 Rev.C

Page 35

SUBWOOFER SETUP

TIME ALIGNMENT

In this Expert Mode menu, you can adjust Phase, Gain, and Low-pass transition frequencies of the subwoofer. The default settings are Phase 0°, Power ON, LPF 100 Hz.

Function Icon Operation

Subwoofer -RCA line-outs (affects the subwoofer

Power

LPF

Phase

Gain

line-out only) ON = Volume according to setting. OFF = Mute

Tap to set the low pass filter OFF 160 Hz/125 Hz/100 Hz/80 Hz/65 Hz

Subwoofer O N LY 0/180° phase adjustment

Touch to set the GAIN level (same as in Quick Audio Control)

-6 < > +6

In this menu you can set the time delay correction for the loudspeakers in your vehicle.

Function Icon Operation

Selection of desired unit

Unit

Speaker

Delay

The distance between the ears and the speaker system installed in the vehicle varies considerably due to the given arrangement of the factory mounting location. This menu gives you the option to delay the audio signal at each of the speakers so that you have a ”center stage” effect.

Set your central listening position. Measure the distance from this position to each speaker. Now you need to add the corresponding delay - depending on the speaker with highest distance - to move the speakers to same distance from selected position. Enter these distance to let all speakers have the same distance. You can fine tune values by “ear” after the distances from listening position to each speaker have been entered, simply by adjusting the left front speaker delay until center stage position is reached.



ms = time cm = distance

Touch to select the desired speaker (FL / FR / RL / RR / SW)

ms = 0.0 < > 10 in approx. 0.1 ms steps cm = 0 < > 340 in approx. 3 cm steps

68 Rev.C 69 Rev.C

Page 36

NAVI-MIXER SETUP

TFT DISPLAY CONFIGURATION

In this Expert Mode menu page, you can adjust audio ducking or mute of audio and video source playback by nav route guidance voice. Works only for ZENEC navigation software.

Function Icon Operation

Mute Media Sources for Navi Voice Announcement

ON / OFF OFF = Ducking of media playback during route guidance voice announcements ON = Media playback is fully muted during route guidance announcements

In the TFT Setup menu you can make screen settings that control the day/night brightness of the TFT LCD display screen. This will only work with microSD card from the ZENEC navigation software bundle (Z-E3756 -SDFEU).

Function Icon Operation

TFT configuration

Tap to adjust TFT display configuration

Tap to select the brightness control mode: TFT Control

Navi = Day/Night brightness is controlled by the navigation

system.

Car = Day/Night brightness is controlled by vehicle illu voltage

TS-Brightness Day

TS-Brightness Night

TS-Auto Standby

NOTE

Day adjust range

0 ~ 30

Night adjust range

0 ~ 30

Tap to enable or disable TFT Auto Standby function and Auto

Screen shutdown. TFT goes into standby after selected time.

Using the DISP button you can set the display brightness to three levels ( 100%→50%→0%).

70 Rev.C 71 Rev.C

Page 37

CAR (VEHICLE) SETUP

INPUT SETUP

In the Car Setup menu, you can set how the ZENEC device interacts with optional components such as cameras and parking assist inside the vehicle. In addition, it can be defined whether the vehicle is a right or lef t-hand drive model.

Function Icon Operation

Car (vehicle) Tap to access vehicle configurations

Tap to set the parking aid display source.

Park Assist

CAM / OFF CAM = Camera On OFF = Camera Off

Reverse Audio Assist

Touch to set the muting function when parking aid is active. OFF / reduced Volume / CAM Audio / MUTE Audio

Tap to set camera switching logic. CAM-1

• Direct camera 1 CAM-2

Reverse CAM Logic

• Direct camera 2 CAM-3

• Direct camera 3 Mo de -1

• Auto-switching function between CAM-1 and CAM -3 Mode-2

• Auto-switching function between CAM-1 and CAM -2

Reverse CAM Off Delay

Tap to set the Camera off delay time

In the Input Setup menu, you can adjust the image settings of each connected camera channel, such as reverse cameras. Contrast, brightness, color saturation and hue can be adjusted.

Function Icon Operation

Inputs

Brightness

Contrast

Saturation

Hue

Tap to adjust image setup configuration of connected external video sources (e.g. rear view camera., etc.)

-10 to +10

Driver Position

72 Rev.C 73 Rev.C

Tap to set either Right-hand-drive or Left-hand-drive vehicle

Page 38

SYSTEM SETUP

CLOCK & DATE SETUP

In the System Setup menu page, you can make various system settings, such as: Adjust the Clock Time, Load Factory settings, initiate Software Updates or set a Password.

Function Icon Operation

System

SW Versions Info

Load Factory

Clock & Date Settings

Software Update

Navigation Installation

Password Function

Password

Expor t to USB

Tap to access various system settings

Tap to access detailed soft ware version information

Tap and confirm to reset the ZENEC system to factory default

Tap to adjust clock time and date

Tap and confirm to initiate a software update.

www.zenec.com→Support→Softwareupdates

Tap and confirm to new or re/-install the navigation software or a new installation of the navgation software.

OFF = password protection disabled ON = password protection enabled

Tap and confirm to store a password

Tap and confirm to save your full profile settings to external data media (USB). (FAT32 formatting)

In the System Setup menu page under Clock & Date, you can set the format, change the displayed time and select the time sync source (system time or GPS) for the time display.

Function Icon Operation

Tap to change the clock time sync. mode

- NAV Sync. = automatic

synchronisation by navigation Clock Time Sync. Mode

(Manual adjustments such as clock time and time zone not

possible)

- RTC Sync. = automatic

synchronisation by system RTC

(Manual adjustments possible)

Clock Format

Set Time

Set Date

NOTE

Tap to change the clock format

Tap to change time if sync is “RTC Sync.“

Tap to change the date (Year: Month: Day)

“RTC” means “Real Time Clock”, a internal Quartz generated time signal.

Load from USB

74 Rev.C 75 Rev.C

Tap and confirm to load your saved device profile settings from external media carrier (USB) back into the ZENEC system

Page 39

SOFTWARE VERSION

In the System Setup menu page under SW version, you will see the currently installed software versions with detailed version info for MCU, OS and APP etc., including a simple Short Software Version.

Function Icon Operation

PASSWORD

System

SW Version

Tap to access this view

Displays the current software version information

In the System Setup menu page under Password function, you can activate and deactivate the password protection for the device.

Function Icon Operation

Password Function

Password

Input Keypad

OFF = password protection disabled ON = password protection enabled

Tap and confirm to store a password* Standard password ”12345”

Enter the desired password

CAUTION

* If you protect you ZENEC system with a Passwor t make sure, you have access to this password anytime. Lost or forgotten Passwords require the device to be uninstalled and sent in to ZENEC Service Centre. Device unlocking is not a service which is free of charge.

76 Rev.C 77 Rev.C

Page 40

INSTALLATION NOTES

CAUTION

● TheinstallationoftheZENECsystemshouldbecarriedoutbyanauthorizedinstaller.Specic

knowledge and tools are required to do the installation. Incorrect installation can cause damage to the vehicle and the ZENEC system.

● Correct functioning can only be guaranteed when you use the ZENEC original accessories included in the kit or those optionally available. The ZENEC system and the original accessories

 mustundernocircumstancesbemodiedoralteredinanyway.Inappropriateactionscan

cause damage to the vehicle and the ZENEC system.

NOTE

● The ZENEC Z-E3756 is equipped with an integrated DAB+ receiver. To make use of this you will need a suitable DAB antenna mounted to the vehicle (not included in kit) that must be connected to the ZENEC system.

● If the target vehicle is already equipped with an original DAB antenna, it is still possible to use it in combination with the ZENEC system.

● Software updates to the ZENEC system are installed with a USB memory device. Therefore

 whenttingthesystemmakesurethattheUSBconnectionoftheZENECsystemwillstillbe

accessible later (installation of USB extension cable or USB hub).

● If you have questions or problems relating to the ZENEC system, please contact the dealer from whom it was purchased.

REMOVAL WORK AND PREPARATION

NOTE

1. Remove the ignition key and keep it outside the car until the installation is finished.

2. Please wait for approx. 10 minutes until the CAN bus system is completely shut down, before you start with the uninstallation of the original device.

3. Start with the uninstallation of the original device.

4. Please switch on the ignition only, when all installation steps are done and the ZENEC system is completely mounted.

NOTE

● MakesurethatallconnectorsattherearoftheZENECsystemhavesufcientroomandare

not bent.

● Connectorswithoutaretainingmechanismmustbeadditionallysecuredwithinsulatingtape.

OVERVIEW INCLUDED ACCESSORIES



 

  





No. Article Qty

1 Mounting frame 1

2 Remote control 2

3 Phillips screws 4

Parking brake cable 1

GPS antenna with metal mounting plate and double sided adhesive pad 1

USB extension cable 2

Bluetooth microphone with mounting accessories 1

24-pin connection cable (4.2, M-Zone, AV-IN) 1

20-pin connection cable (Mic, Cam, IR-IN) 1

10 ISO-DIN main harness 1

11 Main device user manual 2

FM antenna adapter ISO/DIN 1

Navigation microSD card with adapter (without fig.) 1











78 Rev.C 79 Rev.C

Page 41

CONNECTION DIAGRAM Z-E3756

B9 Loudspeaker r ear right (-) B10 Loudsp eaker rear right (+)

B11 Loudsp eaker front right (-)

B12 Loudsp eaker front right (+) B13 Loudsp eaker front left (-) B14 Loudsp eaker front left (+) B15 Loudsp eaker rear left (-) B16 Loudsp eaker rear left (+)

B1 N.A. B2 N.A. B3 KL 30 / Cons tant +12V PWR B4 N.A. B5

Illumination

Switched +12V an tenna PWR

B7 KL 31 / Power GN D B8

KL 15 /

Switched +12V P WR

B10

B11

B12

B13

B14

B15

B16

A9 Loudspea ker rear right (+) A10 Loud speaker front right (+) A11 Loud speaker right (-) A12 Loud speaker front right (-) A13 Loud speaker rear left (+) A14 Loud speaker front left (+) A15 Loud speaker rear left (-) A16 Loud speaker front left (-)

A1 KL 31 / Power GN D A2 KL 30 / Con stant +12V PWR A3 KL 15 / Switc hed +12V PWR A4 Illumination A5 Switch ed +12V amp PWR* A6 Parking A7 Switch ed +12V antenna PWR A8 Reverse ge ar

*300mA m ax.

A10 A12 A14 A16A2 A4 A6 A8

A9 A11 A13 A15A1 A3 A5 A7

(see note on DAB antenna pag e 2)

AM/FM

DAB

GPS

D E

CONNECTION DIAGRAM Z-E3756

E C C DA

Bluetooth Antenna

C E HDMI USB 1/2

A9 A 11 A13 A15A1 A3 A5 A7

A10 A12 A14 A16A2 A4 A6 A8

A1 KL 31 / Power GND A2 KL 30 / Perma nent +12V PWR A3 KL 15 / Switched +12V PWR A4 Illumination A5 Switc hed +12V amp PWR* A6 Parking A7 Switched +12V ante nna PWR A8 Reverse gear

A9 Loudspeaker rear right (+) A10 Loudspeaker front right (+) A11 Loudspeaker right (-) A12 Loudspeaker front right (-) A13 Loudspeaker rear left (+) A14 Loudspeaker front left (+) A15 Loudspeaker rear left (-) A16 Loudspeaker front left (-)

GPS

DAB

GND

Reverse

ext. Mic

IR In

Speed In

CAM 1 Power 300mA

P. CNTR

Parking

GND

CAM 2 Power 300mA

CAM 3 Power 300mA

CAM Audio In

CAM 1 CVBS In

CAM 2 CVBS In

Camera

Line In L

Line In R

CAM 3 CVBS In

A/V In

Video In

Line Out L

Rear Out L

Front Out L

Rear Out R

Front Out R

Subwoofer Out

Line Out

Line Out R

Video Out 1

Video Out 2

Subwoofer Out

Input

(reserved for

Schaudt)

M-Zone

B1 N.A. B2 N.A. B3

KL 30 /

Permanent +12V PWR

B4 N.A. B5

B11

B13

B15

B10

B12

B14

B16

Illumination

Switched +12V antenn a PWR

B7 KL 31 / Power GND B8

Switched +12V PWR

KL 15 / B9 Loudspeaker rear right (-) B10 Loudspeaker rear right (+)

B11 Loudspeaker front right (-)

B12 Loudspeaker front right (+) B13 Loudspeaker front left (-) B14 Loudspeaker front lef t (+) B15 Loudspeaker rear left (-) B16 Loudspeaker rear left (+)

80 Rev.C 81 Rev.C

Page 42

GENERAL

ABBREVIATIONS

Abbreviation Description

A2DP

AF Alternative frequency

CAN-Bus

Manufacturer-independent Bluetooth® technology allowing audio signals to be transmitted (Advanced Audio Distribution Profile)

The CAN bus (Controller Area Network) is a serial bus system for the communication of control units in a vehicle

STATUTORY RIGHTS AND WARRANTY

Dear customer,

Please read the warranty terms below carefully. Should your ZENEC product require warranty service, please return it to the retailer from whom it was purchased or the distributor of your countr y. Do not send-in any product to ZENEC directly.

This ZENEC product is protected against defective materials and/or improper workmanship by a manufacturer warranty for the period of 3 years from date of purchase at retail, to the original buyer. The statutory consumer protection regulation ("EU statutory warranty") remains unaffected by the provided manufacturer product warranty.

For the treatment of warranty related claims, the dealer / importer needs to provide a valid product serial number and the original slip of purchase or the invoice, showing the purchase date.

DAB / DAB+

DSP

EQ Equalizer

FAT32

UKW/FM

GAA Google Android Auto

GPS

GSM

ID3 -Tag

microSD Compact flash memory

Transmission standard for terrestrial reception of digital radio (Digital Audio Broadcasting)

The digital signal processor is used for the processing of digital signals (e.g. audio or video signals)

Formatting format for digital media (File allocation table 32-bit)

Transmission standard for terrestrial reception of very high frequency analog radio (UK W)

Global navigation satellite system for position fixing (Global Positioning System)

Global mobile radio network standard for fully digital mobile radio networks (Global System for Mobile Communications)

ID3 is a metadata container most of ten used in conjunction with the MP3 audio file format. It allows information such as the title, artist, album, track number, and other information about the file to be stored in the file itself.

Not covered by the manufacturer warranty are damages due to:

1. Unauthorized or unapproved installation, incorrect audio or mains connection(s). 2 Defects caused by exposure of product to moisture, water and organic fluids (“solvents”),

excessive heat and prolonged exposure to sun rays as well as excessive dir t or dust.

3. Mechanical defects caused by accidents, fall or impact.

4. Damage due to unauthorized repair attempts and modifications of product not explicitly authorized by the manufacturer.

5. Damage caused by normal “wear and tear” over time.

This warranty is limited to the repair or the replacement of the defective product at the manufacturer‘s option and does not include any other form of damage, whether incidental, consequential or otherwise. Damages caused by improper packaging during transport of product to dealer or impor ter are not covered under warranty. Any compensation claims of sequential damages to auxiliar y components or components in the dashboard caused by the device directly or indirectly, are excluded. Not covered by the manufacturer are consequential costs for the handling of product to conduct warranty service labor. For example the un-installation and re-installation of devices to cure a hardware failure or defect.

REG Regional station

EU Legal Representative: ACR S & V GmbH ∙ Industriestraße 35 ∙ D-79787 Lauchringen ∙ Germany

SSP Secure Simple Pairing (for Bluetooth devices)

TA Traffic Announcement (RDS service)

USB

82 Rev.C 83 Rev.C

A USB connection is a serial bus system for connecting a device to other devices (Universal Serial Bus).

ZENEC by ACR AG ∙ Bohrturmweg 1 ∙ CH-5330 Bad Zurzach ∙ Switzerland

www.zenec.com

E9 10R-05 11960

Page 43

RevC / copy deadline: Q3-2018 English

Manufacturer:ACRAG∙Bohrturmweg1∙CH-5330BadZurzach∙Switzerland EULegalRepresentative:ACRS&VGmbH∙Industriestraße35∙D-79787Lauchringen∙Germany