Zenec ZE-050DVD INSTRUCTION MANUAL
MOBILE DVD & MP3/WMA
STANDALONE PLAYER
POWER EJECT
PLAY PREVIOUSSTOP NEXT
RESET
ZE-050DVD
A-IN V-IN
MODEL NO:
ZE-050DVD
INSTRUCTION MANUAL
AUDIO SYSTEMS
Congratulations to your purchase of this
DVD player. This product has been designed
and built to deliver the highest quality video
reproduction with CD sound.
We are sure you‘ll enjoy watching your favorite movies with this player as a part of your
multimedia system. For best results, please
consult a professional mobile electronics
installer for application advice or troubleshooting.
To guarantee top performance, we recommend to using quality installation accessories such as RCA interconnects, power
cables, and speaker wire. Thank you for
choosing audio systems products for your
mobile entertainment system. We can‘t
change the world, but we can make it sound
and look better.
When Washing Car
Do not expose the product to water or
excessive moisture. This could cause electrical shorts, fire or other damage.
When Parked
Parking in direct sunlight can produce very
high temperatures inside your vehicle. Give
the interior a chance to cool down before
starting playback.
Use the proper Power Supply
This product is designed to operate with 12
volt DC.
Protect the Disc Mechanism
Avoid inserting any foreign objects into the
slot of this player.
Failure to observe this may cause malfunction due to the precise mechanism of this
unit.
FEATURES
Compatible with PAL-DVD (Video CD) and
NTSC DVD (Video CD).
This player can play discs recorded in either
PAL or NTSC format.
A single LSI chip now integrates all major
DVD playback circuit functions including
MPEG2 decoder, video D/A converter, and
audio decoders.
L/R stereo analog audio outputs for connection to existing head unit aux inputs.
Video output is composite video or Svideo.
Supplied remote handles multi-function software (multi - language audio - track/subtitle,
multi-angle, multi-story, etc), plus all basic
functions and last position memory
USE THIS PRODUCT SAFELY
When Driving
Keep the volume level low enough to be
aware of road and traffic conditions.
Use Authorized Service Centres
Do not attempt to disassemble or adjust this
precision product, please refer to the service
centre near by for service assistance.
2
CONTENTS
Safety Information .........................................4
Disc Notes .....................................................5
Installation .....................................................6
Electrical Connections ...................................6
Remote Control .............................................7
Preparing the Remote Control .......................7
Loading a DVD/VCD/CD Disc .......................8
Ejecting a Disc ...............................................8
Basic Operation. ............................................8
On-Screen Display Function .........................9
Multi-audio Language Function ....................9
Menu Function ............................................10
Title Menu Function (For DVD only) .............10
Multi-Subtitle Language Function
(For DVD only) .............................................10
Multi-Angle Function (For DVD only) ...........10
MP3 Disc play .............................................10
Setup ...........................................................11
Initial Setup ..................................................11
Language Setup ..........................................11
Video Setup .................................................12
Audio Setup .................................................13
Rating Setup ................................................14
Additional Information .................................15
Accessories and Hardware .........................16
Defaults Table ..............................................17
Technical Specifications ..............................18
Warranty ......................................................35
3
Safety information
Caution:
Mobile DVD player is a class A laser product.
However this mobile DVD player uses a
visible/invisible laser beam which could cause
hazardous radiation exposure if directed into
the eyes. Be sure to operate the mobile DVD
player correctly as instructed. Use of controls
or adjustments or performance of procedures
other than those specified herein may result
in hazardous radiation exposure. Do not open
covers and do not repair by yourself, refer
servicing to qualified person.
Warning:
To reduce the risk of fire or electric shock,
do not expose this equipment to rain or
moisture.
To reduce the risk of fire of electric shock,
and annoying interference, use only the
recommended accessories.
This device is intended for continuous
operation.
This product incorporates copyright
protection technology that is protected by
method claims of certain US patents and
other intellectual property rights owned by
Macrovision Corporation, and is intended
for home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly
is prohibited.
Manufactured under license from
Dolby Laboratories.
”Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
Region Management
Information:
This Mobile DVD Player is designed and
manufactured to respond to the Region Management Information that is recorded on a DVD
disc. If the region number described on the
DVD disc does not correspond to the region
number of this Mobile DVD Player, it cannot
play this disc.
Disc formats supported by this
player (12 cm disc)
CD: CD, CD-R, CD-RW, CD-ROM,
MP3
VCD: VCD, SVCD, DVCD
DVD: DVD5, DVD9, DVD10
Discs which cannot be played
with this player
DVD-ROM
DVD-RAM
CDV
CD-G
Handing and cleaning
Dirt, dust, scratches and warping disc will
cause misoperation.
Do not place stickers or make scratches on
discs.
Do not warp discs.
A disc should be kept in its case when not in
use to prevent damage.
Do not place discs in following place:
1. Direct sunlight
2. Dirty, dusty and damp areas
3. Near car heaters
4. On the seats or dashboard
Manufactured under license from Dolby
Laboratories.
Dolby and the double-D symbol are
t
4
Disc Cleaning
Preparing New Discs with
Rough Spots
Use a dry soft cloth to wipe the surface. If
the disc is quite dirty, use a soft cloth slightly
moistured with isopropyl (rubbing) alcohol.
Never use solvents such as benzine, thinner or
conventional record cleaners as they may mar
the surface of the disc.
Note:
A disc may become somewhat scratched
(although not enough to make it unplayable)
depending on how it is handled and the
conditions of exposure. Note these scratches
are not an indication of any problem with the
player.
Label side up
A new disc may have rough edges on its
inside and outside edges. If a disc with rough
edges is used, the proper setting will not be
performed and the player will not play the disc.
Therefore, remove the rough edges in advance
by using a ball point pen or pencil as shown
on the right .
To remove the rough edges, press the side of
the pen or pencil against the inside and
outside edges of the disc.
4
Rough spots on
outside edge
Ball point pen
or pencil
Do not bend
Do not touch
the underside
of the disc
Rough spots
on inside edge
Wipe the disc from center
toward the outside edge
5
Installation
py g pp
First rem ove the two trans port screws.
Next, att ach the mou nting bracket of the
player us ing the supplied screws.
(AC C+)Re d
(GN D)Bla ck
(AC C+)Re d
(GN D)Bla ck
SCREW M4X6
Note:
First remove the two transport screws.
Next, attach the mounting bracket of the
player using the supplied screws.
Installation
Note:
First remove the two transport screws.
Next, attach the mounting bracket of the
player using the supplied screws.
SCREW M5X25
SCREW M4X6
Remote control receiver
(GND)Black
(GND)Black
(ACC+)Red
(ACC+)Red
Cigarette Lighter
Figure: Electrical Connections 1
Language Video Audio Ratin
1 32
Audio in
Audio in
Video in
Figure: Electrical Connections 2
6
Remote Control:
DISP
PAUSE
ZOOM
1. Change the Video/Audio to mode IN
2. Press POWER to turn the unit ON or OFF
3. Display the root menu that is stored
on the DVD disc Selects between
PBC ON a PBC OFF on a VCD
4. in MENU mode, these buttons move the
cursor to the up or down
in MENU mode, these buttons move the
cursor to the left or right
5. Confirm the Track/Chapter selected with
the number key or selected with the
cursor
buttons on TV screen or return to
playback
6. Increase or decrease the volume
7. Numeric buttons
8. Press to increase 10
9. Display the TITLE menu that is stored in
DVD disc
10. Changes the AUDIO soundtrack on
multiaudio soundtrack DVD disc.
Changing of the sound mode of the
VCD/CD disc
11. Switch the Repeat mode of DVD/VCD/
CD/MP3 disc
12. Changes the SUBTITLE language on
multisubtitle language DVD disc
13. Display statistical disc information during
Playback
14. Eject button
15. Display the SETUP menu
16. Press to pause playback
17. Press to stop playback
18. Press to skip to the next track
19. press to skip back one track
20. Press to start forward rapidly
21. Press to reverse rapidly
22. Mute the volume
23. Disc search button, cooperatively used
with numeric button
24. Zoom in the capture
25. Select playing discs recorded in either
PAL or NTSC format in the stop mode.
26. Changes the view angle on multi-angle
DVD disc
27. Selects forward slow motion Playback
Preparing the Remote Control
Inserting the Battery
1. Open the battery compartment cover.
2. Insert the new battery ( 3V Cr2025 ).
Make sure that the positive and negative
terminals of the battery are oriented
indicated.
3. Close the cover
7
Using the Remote Control
Point the remote control toward the front of
the player (at the remote receiver “eye”)
Operation angle: About ± 30 degree in each
the direction of the front of the IR mark.
To prevent damage to the unit, be sure to
follow the connection diagram (page 6).
(depending on the disc format) as follows:
DVD VCD:
➞ 1/2x ➞ 1/4x ➞ 1/6x ➞ 1/7x ➞
Pause (still picture)
Pressing PAUSE button during playback, it will
stop play temporarily.
Press the PAUSE button for the second time
to resume playback
.
Loading a DVD/VCD/CD Disc
(Figure: ELECTRICAL
CONNECTIONS 2)
1. Turn the ignition to the Accessory (ACC)
position.
2. Press the
3. Insert the disc into the disc slot (2) with the
label side of the disc facing up.
4. The player starts playback automatically.
POWER button (1).
Ejecting a disc
Press @ (EJECT) button (3) to eject the disc.
Stopping play
1. Press the ■ (Stop) button to stop
playback
Press the 4 (play) button for playback.
2. Press the
stop the playback and go back to initial
Track/Chapter.
.
■ (Stop) button twice. It will
Rapid Forward/Reverse
Press FF 8 & REW 7 during play. Each time
the button is pressed the speed changes
(depending on the disc format) as follows:
DVD/VCD/CD/MP3:
➞ Nomal playback ➞ 2x ➞ 4x ➞ 8x ➞ 20x ➞
Repeat
Press the REPEAT button to select repeat
mode as follows:
DVD:
Press the REPEAT button to select repeat
mode as follows.
➞ RepeatChapter ➞ Repeat Title ➞ OFF ➞
SVCD/VCD/CD/MP3:
Press the REPEAT button to select repeat
mode as follows.
➞ Repeat Single ➞ Repeat ALL ➞ OFF ➞
1. Repeat Single mode continuously
repeat the current track/song.
2. in Repeat ALL mode, all tracks /songs on
the disc are repeated.
ZOOM
If button ZOOM is pressed, picture will enlarge
time to time. But some DVD discs pictures can
not be zoomed.
TITLE
Press TITLE button when DVD is playback, it
will come back to TITLE to play.
Skipping Track
Press 9/: on the remote handset or on the
front panel during playback. Press
to next track, and
9 to back one track.
: to skip
Slow Motion Playback
Press the slow button during playback. Each
time the button is pressed the changes
GOTO:
Press GOTO button for the fi rst time, it will
appear the searching time function and
searching title/chapter function.
Press GOTO button for the second time, it will
give the bookmark when the disc is playing,
on the other hand, the function is escaped.
You need to press the GOTO button the third
time when the disc is playing to escape the
function.
8
Mute Function
Press MUTE button on the card remote Control
to cut down the sound output.
Press it again or vol 팬팫 to resume to previous
volume Level
.
VOL 팬팫
Volume Control:
Press VOL 팬 on the card remote control to
increase the sound level and press VOL 팫 to
decrease the sound level
.
Remote Sensor (IR)
Point the remote handset to the remote
sensor.
Receive the signal from remote handset
.
Turning the player on/off
Press the POWER button on front of panel or
press POWER button on remote control to
turn the player on or off.
Mode
Whenever you press AUX button, input
condition is to be changed as follows.
➞ DVD ➞ AUX1 ➞ AUX2 ➞
AUDIO/VIDEO IN
The unit can accept an auxiliary(AUX) signal
from external equipment.
1. Connect the equipment and the unit with
A/V cables, the AUDIO OUT of the external
equipment is connected to the AUDIO IN
jack on the front panel of the unit, the
VIDEO OUT of the external equipment
is connected to the VIDEO IN jack of the
unit.
2. Turn on the external equipment and the
unit.
3. Select input function by pressing the AUX
button on the remote control, Select the
AUX1 (back) or AUX2 (front) input from
external AV signal.
4. The signals are routed through the Video
output jack and the Audio output jack of
the DVD unit.
On-Screen Display Function
Press the DISPLAY button during playback to
display the contents of the current disc on the
screen.
Example:
(1) Press DISPLAY for the first time:
DVD SVCD VCD CD
The elapsed time and the remain time will be
shown on the screen
(2) Press DISPLAY for the second time:
SVCD VCD CD:
Disc type, elapsed time, remain time Track
Number, Total Track Number of the disc
currently being played will shown on the
screen.
DVD:
Bitrate 8.448 Mbps
Disc type, elapsed time, remain time, Title
number, Chapter number, view angle, audio
channel, audio type, language, Subtitle number
of the currently being play will be shown on
the screen.
(3) Press DISPLAY for the third time:
The message on the screen will be
cleared
.
MP3:
The elapsed time on the screen will be shown
or cleared by pressing display button.
Multi-audio Language Function
DVD:
Press AUDIO during playback.
Each time the button is pressed, number of
the audio soundtrack language changes on
sequential order.
Notes:
The language number is different according to
the disc.
9
Some disc only contain one language soundtrack. When no different language soundtrack
is available
corner of the screen
x will be displayed in the top left
.
VCD CD:
Press AUDIO during playback.
It is possible to switch the sound between
monaural and stereo sound
.
When no different language soundtrack are
recorded,
top
corner.
x
will be displayed at screen left
Multi-angle Function
(For DVD only)
Press ANGLE during playback.
Each time the button is pressed, number of
the angle changes in sequential order.
➞ Stereo ➞ Left ➞ Right ➞
MENU Function
DVD:
Press MENU button while the disc is playing
and the disc menu will be displayed. You can
navigate with the remote control navigation
keys and select a feature with the ENTER key.
Press MENU twice, it will go back to the
primary place.
VCD:
Press MENU button while the disc is playing,
you can switch between PBC ON and PBC
OFF mode.
TITLE Menu Function (For DVD
only)
If the DVD has multiple titles recorded on the
disc. It can select preferred title from the title
menu to start playback.
1. Press TITLE during playback. The title
menu is displayed.
2. Press the cursor button show in TV screen,
select preferred title by the cursor button
and confirmed by ENTER key.
Multi- subtitle Language
Function (For DVD only)
Press SUBTITLE during playback.
Each time the button is pressed , number of
the subtitle language changes in sequential
order.
Notes:
The language number is different according to
the disc.
Some discs only contain one language soundtrack.
Notes:
The angle number is different according to the
disc.
The function only work for discs having scenes
recorded at different angles.
When no different angles are available,
display in the top left corner of the screen
x will
.
MP3 /MPEG/JPG DISC PLAY
MP3 disc is playing as the format of FOLDER.
For example
Use 5634 to select the item or folder, then
press ENTER button.
Pressing REPEAT button repeatedly can select
three kinds of repeat play mode.
In the playback, use
or back.
When the STOP, use 5634 Move the
cursor to MODE, press ENTER button to
change the mode.
Use SUBTITLE button to return the upper
window.
Note: Press MENU or TITLE button to enter
the preview mode when playing JPG
:
CD-R MENU
ROOT
--
Mode Folder Normal
--
Track 01
Track 02
Track 03
Track 04
Track 05
Track 06
9/: to kip an item ahead
0
.
10
INITIAL SETUP
SETUP MENU - MAIN PAGE
Language Video Audio Rating
LANGUAGE SETUP
Language Video Audio Rating
OSD Menu
Subtitle
Audio
DVD Menu
English
Off
English
English
1. Press SETUP in the stop mode.
2. The initial SETUP menu is displayed.
3. Select the preferred item by using the
3/4 buttons.
4. Press ENTER buttons.
a. Language
This setup page includes all the item of
Language display feature. The detail please
refer to LANGUAGE SETUP MENU.
b. Video
This setup page include all the item for TV
display feature. Please refer to VIDEO SETUP
MENU.
c. Audio
This setup page includes all the item for AUDIO.
Please refer to AUDIO SETUP MENU.
d. Rating
This setup page includes rating feature. The
detail please refer to RATING SETUP MENU.
OSD Menu
Subtitle
Audio
DVD Menu
Language Video Audio Rating
OSD Menu
Subtitle
Audio
DVD Menu
Language Video Audio Rating
OSD Menu
Subtitle
Audio
DVD Menu
English
Off
English
English
English
Off
English
English
English
Off
English
English
English
Francais
Espanol
Nederlanas
English
Chinese
French
Spanish
Dutch
Auto
Off
English
Chinese
French
Spanish
Dutch
~
Language Video Audio Rating
OSD Menu
Subtitle
Audio
DVD Menu
English
Off
English
English
11
English
Chinese
French
Spanish
Dutch
Loading...