We are delighted that you have chosen a product from ZENEC.
Please read this operating manual before you start your new ZENEC system. In this device user
manual you will find important instructions and information for the safe operation of the ZENEC
system, and to help you make the most of its technical advantages.
All the information in this manual corresponds to the state at the time of going to press, and applies
only to ZENEC systems in original condition. On account of possible updates to device software, the
illustrations and features shown in this operating manual may be different from your ZENEC system.
Differences in the information, illustrations or features cannot form a basis for any claims.
If you sell your vehicle with the ZENEC system still fitted, please ensure that this operating manual
stays with the vehicle, and that any personal data like a phonebook stored in the device is deleted.
BLUETOOTH (HANDS- FREE SYSTEM) ........................................................................................... 41
CONTROL AND OPERATION BAR (RIGHT) .................................................................................... 42
FAVORI TE S ......................................................................................................................................... 50
STATUS BAR.......................................................................................................................................12
SEARCH AND INPUT FUNCTION ..................................................................................................... 13
FM RADIO ........................................................................................................................................... 14
FM BAR GRAPH MODE ..................................................................................................................... 15
MANUAL FM STATION SEARCH ...................................................................................................... 16
FM SETUP ........................................................................................................................................... 17
FM STATIONS-PRESETS ................................................................................................................... 18
DAB+ RADIO .................................................................................................................................... ...19
DAB+ ENSEMBLE AND STATION LIST ............................................................................................ 20
SMARTLINK DIRECT ......................................................................................................................... 37
SMARTLINK DIRECT CONTROL INTERFACE ................................................................................38
SMARTLINK DIRECT APP LINKING.................................................................................................39
REAL DASH ........................................................................................................................................ 40
2 Rev.B 3 Rev.B
GERÄTEBEDIENUNG–Z-E3726
Help Passwort
SAFETY INSTRUCTIONS
CAUTION
If the driver of the vehicle is distracted, this may lead to an accident or injur y. Operating the
ZENEC system can distract attention from the general traffic situation! Equally, connecting,
changing or inserting data media can distract the driver from the general traffic situation.
CAUTION
Always choose loudspeaker settings such that acoustic signals coming from outside can always
be heard in the vehicle (e.g. signal horns or sirens).
CAUTION
Incorrect installation or commissioning of the ZENEC system may cause damage to the ZENEC
system or to the vehicle electronics. Only let qualified specialists authorized by ZENEC install the
device.
TURN ON / OFF
Manual ON / OFF
Press and hold the sensor button (fig. S/7
3), to turn the ZENEC system ON or OFF.
Automatic ON / OFF
E>GO CORE devices mounted in vehicles without factory installed SWC: Device will switch on with
ignition (ACC) position of key*.
The device automatically switches on/off by CAN bus inter face ignition signal.
Switching on the ignition will activate the ZENEC system. The boot process can take up to 30sec.
This may result in some delay until the system is ready. The ZENEC system is shut down by
switching off the ignition, or removing the ignition key.
CAUTION
This ZENEC system is intended solely for operation at an on-board voltage of 12 V DC. Operating
the ZENEC system at any other voltage can cause damage to the ZENEC system or to the
vehicles electrical system.
CAUTION
Taking apart or modifying the ZENEC system can result in damage to the device or the vehicle.
Opening the device or modification by a person not authorized by ZENEC will render warranty
claims null and void.
In the event of a malfunction or defect please contact an authorized ZENEC dealer. Unauthorized
repairs will void any warranty claim.
CAUTION
The connection and charging leads of external mobile devices can get in the way of the driver.
Please run these so that the driver's freedom of movement is not hindered.
CAUTION
Route recommendations and displayed traffic signs on the ZENEC system may differ from the
real situation. Real traffic signs and traffic regulations have precedence over route
recommendations and indications of the ZENEC system.
Speed data displayed in the navigation system corresponds to the permitted speed limit. Please
adjust your speed and driving behavior to the prevailing visibility, weather, road, and traffic
conditions.
ANTI-THEFT PROTECTION
The ZENEC system is equipped with an anti-theft protection function. If this is active, on restarting
the ZENEC system after interruption of the power supply you will be asked to enter your password.
To change the password:
Device User Manual → Setup → Password
NOTE
Keep your password safe. If the password is
lost the ZENEC system must be uninstalled,
and sent back in to ZENEC Service to
unblock the anti-theft protection. The
unblocking service is not free of charge!
See detailed information at page 70
4 Rev.B 5 Rev.B
MULTIFUNCTION STEERING WHEEL
FRONT PANEL
ItemIconFunction
1
2
3
4
5
6
w
|
v
Reduce volume
Increase volume
Mute
Radio source Press to choose the next radio station.
|
Media
source
Radio source Press to choose the previous radio station.
Media
source
Accept call
8
9
1
2
3
4
5
6
7
Device Front Panel Control Options
ItemIconFunction
Press to choose the next track/title.
Press and hold to fast for ward.
Press to choose the previous next track/title.
Press and hold to fast rewind.
1
○
2
○
3
HOME
4
5
6
7
FAV
Internal microphone
MIC
Hole in the panel for reset pin
RST
Press and hold to turn device ON or OFF
Tap to mute/- unmute device
Tap to jump back to main menu
Press and hold jump to audio settings
Tap to select preferred content or execute a function
Inside navigation source: Long press open Quick-Media-ControlBar
Press and hold to jump to audio settings
Tap and / or hold to increase the volume
Tap and / or hold to decrease the volume
7
8
6 Rev.B 7 Rev.B
Reject / End call
Voice (not supported)
8
9
Touchscreen display
microSD card slot on the underside of the device for GPS navigation software
behind „MAP“ cover
MAIN MENU STRUCTURE
MAIN MENU ICONS
Main menu with 8 Icons
Display – touch sensitive operation Bedienung
FunctionIconOperation
Slide
Move
Swipe to navigate in the main menu by sliding page to the lef t
or right
Press and hold to move an icon into the desired position
You can navigate through main menu pages by swiping or tapping on the orange page markers in
the bottom area of each page.
FunctionIconOperation
Navi
Bluetooth
Tun e r (FM )
USB
BT- Music
DAB+
Tap to open navigation App
Tap to open the Bluetooth suite
Tap to open FM radio source
Tap to enter USB source
Tap to open BT-Music source
Tap to open DAB+ radio source
8 Rev.B 9 Rev.B
MEDIA AUDIO SOURCES
INPUT SOURCES
You can access / enter connected internal or external sources by tapping on the main icon according
to the following list.
FunctionIconOperation
USB
BT- Music
WebLink
Tun e r FM
DAB+
Smart Link
Tap to enter USB source
Tap to open BT-Music source
Tap to start ZENEC WebLink
Tap to open FM radio source
Tap to open DAB+ radio source
Tap to start ZENEC SmartLink
To select and open external sources like HDMI, Camera, AV/IN, WebLink or SmartLink, they need to
be paired or physically connected to the device.
Input Sources
FunctionIconOperation
HDMI
Camera
WebLink
Smart Link
AV/I N
Tap to open HDMI source
Tap to enter camera source
Tap to start ZENEC WebLink
Tap to start ZENEC SmartLink
Tap to open AV/IN source
NOTE
Icons in the main menu remain greyed out for sources not connected to device.
10 Rev.B 11 Rev.B
STATUS BAR (”INFO BAR”)
SEARCH AND INPUT FUNCTION
The „info bar" in the upper hand screen area shows TA, volume and time but also contains two
important controls for device operation: BACK (left side) and ALT (right side).
FunctionIconOperation
Back
Clock Time
Tra f fic
Announcement
Volu me
ALT
No
DAB Signal
Tap to jump one level up or back
Display of time (no interaction possible)
Traffic announcement of FM radio (if function is set to active)
Shows the current playback volume
Tap to select / start a previously assigned function
Setup → Misc → ALT Software button
This icon indicates that no DAB signal, or no DAB antenna is
connected to device.
The keyboard for search and input is based on the Android OS system layout. The system language
selection will automatically assign QUERTY or QWERTZ layout.
FunctionIconOperation
Search
Cursor and text input field
Tap to delete a number, letter or sign
Delete
Press and hold to delete the full string
Back
Tap to end the search or the input
Tap to select small / capital letters for entries
Large / Small
Tap twice to write all letters or numbers in capital style
List view
Open keyboard
Tap to show all search results/- full list
Tap to open the keyboard
12 Rev.B 13 Rev.B
FM RADIO
FM BAR GRAPH MODE
The FM RDS source menu of fers a control-/operating section on the right hand side, for fast and
convenient adjustments during the FM radio playback.
Center Section of Display
FunctionIconOperation
Station freq
search up
Station
Station freq
search down
Cover
Info display
area
Tap to start the auto FM station search, running up in the
frequency band
Station name / Station frequency
Tap to start auto FM station search, running down in the
frequency band
Shows radio station graphics or cover picture of artist
Finger swiping left and right to access stored FM stations
previous / next
Control- and Operating Section
FunctionIconOperation
Info
Frequency
Scale
Preset
Tap to show station information
Tap to open FM station frequency bar
Tap to show the stored FM station list
The FM setup mode (press gear icon) allows to assign two different operation modes to both station
frequency arrows: manual steps in 100kHz, or auto scan (stopping at next station). See page 18.
FunctionIconOperation
Station Frequency
UP
Station
Frequency Input
Station Frequency
DOWN
Tap to start manual 100kHz jump, or FM station auto search
up
Tap to open the frequency direct input mode keyboard
Tap to start manual 100kHz jump, or FM station auto search
down
Press and hold to slide the frequency pointer of the bar graph
Bar Graph Scale
into any position. Tap to set a desired frequency value on the
scale
Tuner Setup
TA
FM / DAB
Switch
14 Rev.B 15 Rev.B
Tuner settings
Tap to activate or de-activate the auto switching of RDS traffic
announcements
Tap to switch to DAB
MANUAL FM STATION SEARCH
FM SETUP
When you tap to the frequency display area, the numeric input keyboard opens for a direct station
frequency input.
FunctionIconOperation
Station
Frequency UP
Station
Frequency
Station Frequency
DOWN
Scale
Delete
Keypad
OK
Tap to auto seek / manual seek up, depending on setting
Tap to open and close station direct frequency input via keypad
Tap to auto seek / manual seek down, depending on setting
Radio frequency scale display
Tap to delete a number
Press and hold to delete the full text string
Direct frequency input option
Tap to confirm frequency
Here you can set important FM RDS based settings such are AF and REG.
FunctionIconOperation
AF
REG
SCAN
FM antenna
socket phantom
power
TA
Alternative Frequency ON / OFF
Setting to keep AF in the regional (local) station tuning mode.
Setting to choose the automatic or manual station frequency
search.
Tap to turn ON the 8.5V or 12V phantom power supply out of the
FM antenna socket on the device backside.
Tap to activate or de-activate the auto switching of RDS traffic
announcements
16 Rev.B 17 Rev.B
FM STATIONS-PRESETS
Select a previously stored FM radio station by tapping on the station preset button.
DAB+ RADIO
The DAB+ source menu offers a control- operating section on the right side of the display, allowing
for simple and convenient direct adjustments of DAB+ functions in the playback menu.
FunctionIconOperation
Previous
page
Next
page
Select station /
Store a station
Tap to switch to previous preset page
Tap to switch to next preset page
Tap to select a previously stored radio station. Press and
hold the station to save an actual radio station on any of the
station preset buttons
FunctionIconOperation
Station up
Station info
Station down
Slideshow
Tap to jump to next station
Press and hold to jump to next Ensemble
Station Name / Ensemble name
Tap to jump to previous station
Press and hold to jump to previous Ensemble
Radio station artwork / artist display (”MOT Slideshow”)
Finger swiping left and right to switch between Preset stations
Info Display Area
Pre-Slideshow (Station list pre-show) area: Finger swiping
left and right to scroll the Station list
Station list back
(List scrolling)
Pre-Slideshow
(Station list pre-show)
Station list forward
(List scrolling)
Press / hold to move the station list back
DAB+ Station list artwork / artist pre-display, if available
Press / hold to move the station list for ward
Control- and Operating Section
FunctionIconOperation
FM / DAB+
Switch
Info
List
Preset
Tap to switch to FM tuner source
Tap to show station information - main display
Tap to open the station list (showing all currently receivable
radio stations in the area)
Tap to show the stored DAB station list
Setup
18 Rev.B 19 Rev.B
Tap to change settings for DAB+ functions
DAB+ ENSEMBLE AND STATION LIST
DAB+ SETUP
Once the first DAB+ band scan has completed, device will show all DAB+ Ensembles and radio
stations of sufficient signal strength. The Ensemble list and its content is auto updated periodically.
FunctionIconOperation
Ensemble list
selection
List scrolling
Back
Tap to open an Ensemble, showing the assigned DAB+ radio
station list
Press and hold to move the slider of the Ensemble list up and
down
Tap to jump one level back or up
A tap on each Ensemble opens the related DAB+ station list of the respective Ensemble. The station
list content follows exactly the original Ensemble display format and list sequence.
The setup page for the DAB+ tuner allows to define important functions such as DAB<>DAB and
FM<>DAB station following. And also to activate the phantom power supply voltage of the DAB
antenna socket.
FunctionIconOperation
DAB-DAB
Following
FM-DAB
Following
DAB
antenna socket
phantom power
DAB
Firmware
Tap to turn DAB-DAB station following ON or OFF
Tap to turn FM-DAB station following ON or OFF
Tap to turn the 12V phantom power supply of the DAB
antenna socket on the device backside ON or OFF
Displays the current DAB+ Firmware version
FunctionIconOperation
Radio station
selection
List scrolling
20 Rev.B 21 Rev.B
Tap to select one particular radio station out of the list
Press and hold to move the slider of the station list up and down
DAB+ STATION-PRESETS
USB / BT A2DP / MEDIA
Select a previously stored DAB+ radio station by tapping on the station preset button.
FunctionIconOperation
Previous
page
Next
page
Select station /
Store a station
Tap to switch to previous preset page
Tap to switch to next preset page
Tap to select a stored DAB+ station. Press and hold the station
to save the actual radio station on any of the station preset
buttons
Various types of information shown in the source menu of the audio playback by (USB, BT A2DP,
etc.).
FunctionIconOperation
Album Cover Art
Artist
Tra c k
Album
Genre
If a cover is stored on the music media, it will be displayed.
This function is not supported for BT Audio playback.
Information about the artist
Information about the track
Information about the album
Information about the genre or any other special infos
Tap to skip to the previous track
Press and hold to start fast reverse
Back
Swipe to the left to skip to the previous track
Play
Pause
Tap to play a track
Tap to pause at a track
Tap to skip to the next track
Press and hold to start fast for ward
Forward
Swipe to the right to skip to the next track
Playback Time
Line
22 Rev.B 23 Rev.B
Tap or slide to skip within a track
Loading...
+ 28 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.